mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Mechanical Semi-Autos (http://www.mcarterbrown.com/forums/mechanical-semi-autos/)
-   -   Trilogy Autocockers and a trilly lot (http://www.mcarterbrown.com/forums/mechanical-semi-autos/248975-trilogy-autocockers-trilly-lot.html)

ventturei26 01-08-2014 04:45 PM

Trilogy Autocockers and a trilly lot
 
ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!ALL HAVE BEEN SOLD!
trilly autocockers up for sale today

ones with Green tape on just the feedneck with no writing means they function just fine, but dont know any of the chrono fps.
tape on barrel is the issue it had when airing it up
tape on barrel and on feedneck means it got a nickname while i was tinkering

2 of the leaky guns dont have orings on the 3 way, and i couldnt find any in my box, but complete functioning parts are present
most have Infinite stamped on in small cursive writing on the left side, and all show wear specially on the trigger frames.

some are missing certain screws in the frame, or one in the bottome line, 1 or 2 have nuts as cocking rod collars

all prices are plus shipping (12.80 for 2/3 day flat rate)


trilly #1
leak down barrel
30$
http://i2.photobucket.com/albums/y8/...psbed2ab92.jpg

trilly #2
35$
http://i2.photobucket.com/albums/y8/...psfeeb5110.jpg

trilly #3
20$
leaks from around the pnues, prob just an oring
http://i2.photobucket.com/albums/y8/...psef9997b7.jpg

trilly lot
35$
misc parts that couldnt make a full trilogy.
frames are missing sears, one body has stripped frame holes, the other has a cocking rod stuck in the hammer
http://i2.photobucket.com/albums/y8/...ps1910e98b.jpg

williamk 01-08-2014 07:59 PM

#3 work ok? just missing a barrel and no bottom line? If so I'll take it.

ventturei26 01-08-2014 08:12 PM

sorry updated that it has a small leak in the front but still cycles like it should more than likely just an oring


All times are GMT -4. The time now is 07:38 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC