bills forces sale of unfinished nasty spyder

CamoDeafie · 06-16-2008, 08:58 PM

ARGH. due to the stupid tax loophole in which i have to earn $8,000 in taxable income a year to be considered indepedent, and which means i am not eligible for my stimulus check, i have to sell the nasty spyder as is, and with the parts its coming with, in order to pay bills and such and not be in the red

specs are as follows, custom milled spyder body, raw aluminum, no anodizing, no ball detents, spyder valve and stems included, one needs a cupseal, all o-rings are good, comes with the unfixed booyaah elcd trigger frame, which needs a new microswitch, connector, 6-pin harness unit for battery, maybe a couple soldering to the noid, not sure as i havent opened it up in a while... GT2000 trigger frame, with both metal 45 grip panel and plastic m16 grip unit, m4 stock, high flow bolts, feednecks and everything's included, CP 15 degree vert asa, it doesnt leak at all, it doesnt work as desired, unless you remove the vertical pin and run it bolt action, it needs a milled T connector in order to work in semi auto, or a sled of some such... oh and its missing the RVA retaining pin, im also including the stock rva unit from another spyder.

i am asking $300+shipping mostly for the body and frame, but all parts are included

here are the pics,

sable · 06-16-2008, 10:04 PM

oh my god. so sweet. sorry to hear that its got to go.

id like to have that, but i have no money.

RealtorTommy · 06-16-2008, 10:05 PM

As I'm no smith and others might want to know...what would it cost to complete this project....maybe a smith could chime in?

CamoDeafie · 06-16-2008, 10:39 PM

well i would think for the anodizing of the body, pbmodshop charges $22 or so for it.... drill n tapping for cocker detents or wire detents or eyes, probably 10-20 or so, repairing the elcd frame, (not a necessary thing. but this is the only spyder i have, so no use for the elcd) $30-50 plus labor.... and machining a T connector to keep the bolt assembly rigid, or a cocker styled sled, not sure......so approx 100 or so to finish the beast....

RealtorTommy · 06-16-2008, 10:41 PM

thanks...........

CamoDeafie · 06-16-2008, 10:44 PM

still...its way cheaper than most double barreled stuff

:P lol....

Mayvik · 06-16-2008, 11:18 PM

*sigh*

PM'ing

sable · 06-16-2008, 11:21 PM

i so wish i could take it.

Mayvik · 06-16-2008, 11:26 PM

Quote:

Originally Posted by sable

i so wish i could take it.

Well if I fail miserably to get it finished, it might end up on the block again!

CamoDeafie · 06-16-2008, 11:44 PM

and..SOLD to mayvik!

06-16-2008, 08:58 PM	#1 (permalink)
CamoDeafie Banned Join Date: Feb 2007 Location: Monmouth, Oregon	bills forces sale of unfinished nasty spyder ARGH. due to the stupid tax loophole in which i have to earn $8,000 in taxable income a year to be considered indepedent, and which means i am not eligible for my stimulus check, i have to sell the nasty spyder as is, and with the parts its coming with, in order to pay bills and such and not be in the red specs are as follows, custom milled spyder body, raw aluminum, no anodizing, no ball detents, spyder valve and stems included, one needs a cupseal, all o-rings are good, comes with the unfixed booyaah elcd trigger frame, which needs a new microswitch, connector, 6-pin harness unit for battery, maybe a couple soldering to the noid, not sure as i havent opened it up in a while... GT2000 trigger frame, with both metal 45 grip panel and plastic m16 grip unit, m4 stock, high flow bolts, feednecks and everything's included, CP 15 degree vert asa, it doesnt leak at all, it doesnt work as desired, unless you remove the vertical pin and run it bolt action, it needs a milled T connector in order to work in semi auto, or a sled of some such... oh and its missing the RVA retaining pin, im also including the stock rva unit from another spyder. i am asking $300+shipping mostly for the body and frame, but all parts are included here are the pics, Last edited by CamoDeafie; 06-16-2008 at 09:05 PM.

06-16-2008, 11:18 PM	#7 (permalink)
Mayvik Inch of Gold Join Date: May 2007 Location: Denver	sigh PM'ing __________________ My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-16-2008, 10:04 PM	#2 (permalink)
sable Banned Join Date: Jan 2008 Location: Houston, TX	oh my god. so sweet. sorry to hear that its got to go. id like to have that, but i have no money.

06-16-2008, 10:05 PM	#3 (permalink)
RealtorTommy Banned Join Date: Sep 2007	As I'm no smith and others might want to know...what would it cost to complete this project....maybe a smith could chime in?

06-16-2008, 10:39 PM	#4 (permalink)
CamoDeafie Banned Join Date: Feb 2007 Location: Monmouth, Oregon	well i would think for the anodizing of the body, pbmodshop charges $22 or so for it.... drill n tapping for cocker detents or wire detents or eyes, probably 10-20 or so, repairing the elcd frame, (not a necessary thing. but this is the only spyder i have, so no use for the elcd) $30-50 plus labor.... and machining a T connector to keep the bolt assembly rigid, or a cocker styled sled, not sure......so approx 100 or so to finish the beast....

06-16-2008, 10:41 PM	#5 (permalink)
RealtorTommy Banned Join Date: Sep 2007	thanks...........

06-16-2008, 10:44 PM	#6 (permalink)
CamoDeafie Banned Join Date: Feb 2007 Location: Monmouth, Oregon	still...its way cheaper than most double barreled stuff :P lol....

06-16-2008, 11:21 PM	#8 (permalink)
sable Banned Join Date: Jan 2008 Location: Houston, TX	i so wish i could take it.

06-16-2008, 11:44 PM	#10 (permalink)
CamoDeafie Banned Join Date: Feb 2007 Location: Monmouth, Oregon	and..SOLD to mayvik!