Buy, Sell, Trade

[hank_k]

Too much stuff, too little space, time for a little purging.


I.C.E Panther VTS. Picked this up a few months back, and have only had the chance to put a couple rounds through it over a chrono. Shot a fairly steady 275. No leaks from either of the ASA units or in the gun anywhere .. $65 shipped


ACTI TM-11a. Another acquisition from a few months ago, and another I've only chrono'd. Shot a pretty steady 240 on a snowy afternoon. No leaks, but the valve body was drilled and tapped for a retaining screw a little to enthusiastically, so there is penetration into the valve. A careful application of loc-tite solved the leak I had found there. Good as gold now .. $65 shipped


Classic Automag with some extras. The stock was worked on a bit by noxx, and then by me to get a mag in it. The tank mount is about 85% complete, just needs some cleaning up before being locked down for good. I have two trigger groups for it, one is a slider unit from noxx another is a hinged unit I built up myself. Mine needs a bit of finishing work to smooth out the corners, noxx's just needs to be installed. That IS a centerfeed body you see in there, it's been 'milled' for pump as well. These are available from AGD for 60 and shipping, don't show up anywhere else all that often from what I've seen .. $250 shipped for the lot.


Tippmann Pro-Lite. Was my knockaround gun for the last year, and has popped more than a few paintball cherries. Has a sporadic hiss from the nuts holding the airline to the valve. I have a feeling this is a teflon tape issue, I just haven't gotten to it. Shoots solidly and has no leaks of consquence.. $75 shipped


What I understand to be a 2004 prostock. Has a delrin bolt installed and comes with a bag of bits as well. Needs the pneumatics plumbed and I'd imagine a timing job.. $125 shipped

[hank_k]

and up.