Halfblocked, midgeted, and mini'd autococker with upgrades

CertifiedPaintballer · 01-07-2009, 02:09 PM

It has CCM internals, except for the halfblock hammer. The LPR and ram are WGP, and it has a STO 3-way. The reg is a 2liter. It would come with an adjustable feedbeck, instead of the stock.

The only bad things are that the rod coming out of the ram is partly snapped because of trying to get a loctited pump arm off, so I'm not totally sure if the pump arm would stay attached to the ram. I also don't have any air, so I never aired it up, I just pieced it together, so I'm not sure if there would be a leak somewhere (there shouldn't be any leaks, but I'm just letting you know that I can't be sure since I didn't air it up). And of course since I don't have any air I never got around to timing it. There is also a small scratch going around the barrel above the pneumatics.

For a price...$350obo

I will look at trades. I would really like a PPS, AKA, or CCM marker. I'll look at other cockers and mags too. I don't want anything that will lose its resale value.

CertifiedPaintballer · 01-08-2009, 07:30 PM

bump

Dagdamor · 01-09-2009, 01:43 PM

FYI: $350 is pretty high

CertifiedPaintballer · 01-09-2009, 03:53 PM

Body with milling and ano: $70
Internals from ccm:$70
Frame: $30
Halfblock kit: $50
AKA 2 liter: $70
ASA and fittings: $20
Adjustable feedneck: $20
Barrel: $10
Mini front block:$15
Pneumatics: $30

And add shipping onto that.

Plus I don't really need the cash, I really want trades.

CertifiedPaintballer · 01-11-2009, 12:01 AM

Bump...price is negotiable.

WIvijhn · 01-12-2009, 01:54 AM

want a typhoon?

CertifiedPaintballer · 01-12-2009, 04:39 PM

PMing you

CertifiedPaintballer · 01-15-2009, 08:46 PM

back to the first page

DanDaMan · 01-15-2009, 11:51 PM

$200 without the pneus reg or asa? These retail for like 99, so that's my offer and I'm stickin' to it.

-DDM

PS: How would I pump this? Custom rod?

CertifiedPaintballer · 01-15-2009, 11:52 PM

PMing you

01-07-2009, 02:09 PM	#1 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	Halfblocked, midgeted, and mini'd autococker with upgrades It has CCM internals, except for the halfblock hammer. The LPR and ram are WGP, and it has a STO 3-way. The reg is a 2liter. It would come with an adjustable feedbeck, instead of the stock. The only bad things are that the rod coming out of the ram is partly snapped because of trying to get a loctited pump arm off, so I'm not totally sure if the pump arm would stay attached to the ram. I also don't have any air, so I never aired it up, I just pieced it together, so I'm not sure if there would be a leak somewhere (there shouldn't be any leaks, but I'm just letting you know that I can't be sure since I didn't air it up). And of course since I don't have any air I never got around to timing it. There is also a small scratch going around the barrel above the pneumatics. For a price...$350obo I will look at trades. I would really like a PPS, AKA, or CCM marker. I'll look at other cockers and mags too. I don't want anything that will lose its resale value. __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html Last edited by CertifiedPaintballer; 01-07-2009 at 02:14 PM.

01-08-2009, 07:30 PM	#2 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	bump __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

01-09-2009, 01:43 PM	#3 (permalink)
Dagdamor Active Member Join Date: Dec 2008 Location: Ontario, Canada	FYI: $350 is pretty high __________________ -Dag RoughNecks 'Dagman' #4

01-09-2009, 03:53 PM	#4 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	Body with milling and ano: $70 Internals from ccm:$70 Frame: $30 Halfblock kit: $50 AKA 2 liter: $70 ASA and fittings: $20 Adjustable feedneck: $20 Barrel: $10 Mini front block:$15 Pneumatics: $30 And add shipping onto that. Plus I don't really need the cash, I really want trades. __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

01-11-2009, 12:01 AM	#5 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	Bump...price is negotiable. __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

01-12-2009, 01:54 AM	#6 (permalink)
WIvijhn MCB Member Join Date: Sep 2007 Location: South Daytona, FL	want a typhoon? __________________ Check the PM in my sig and DM me if interested. WIvijhn it's pronounced Wisconsin vision MCB Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

01-12-2009, 04:39 PM	#7 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	PMing you __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

01-15-2009, 08:46 PM	#8 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	back to the first page __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

01-15-2009, 11:52 PM	#10 (permalink)
CertifiedPaintballer MCB Member Join Date: Mar 2008 Location: Northampton, PA	PMing you __________________ http://www.mcarterbrown.com/forums/f...tml#post354930 ^Feedback^ (Has links to my other feedbacks) Mag:http://www.mcarterbrown.com/forums/m...ore-f-s-t.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search