Buy, Sell, Trade

[Crazy685]

This is a Tippmann 68 Carbine that has been sitting in my closet for the past 9 years! I used to play woodsball and this was my reliable workhorse. Gun is in very very good condition. Gun worked great when I last used it, but that was a long time ago like I said. My buddy has given me alot of his left over paintball stuff as he stopped playing last year so this is very recent stuff, like the Spyder you will see listed by me as well!

-68 Carbine with DYE 12 inch Stainless Steel barrel

-JAVA 200 round hopper

-12 oz Co2 tank

Comes with everything needed to get out there and play minus air and paint. Im selling this entire package as is. Do not have Co2 in the tank nor is there a tank/shop that is local. Sold As Is. Marker is missing the grip that goes over the barrel, and the little clamp nut that clamps down on the loader. You can just put tape around the loader neck and that keeps it in place or get a $.50 bolt+nut to clamp it down.

edit: Has a slight leak in the middle of the marker, after tearing it down and researching it appears to need a new hammer o-ring.

$60 shipped.

[woouulf]

pm ed

[Crazy685]

I replied. $55 without hopper shipped, if you're paying paypal.

[woouulf]

payment sent!

[woouulf]

Got my gun today.. tank , gun and barrel were not wraped were bouncing around togather not protected (there was newspaper,but not enough or even close), not sure if tank o-ring seat was ruined during shipping or not.... slight leak as listed means translates to WILL NOT HOLD AIR, seller stated inspected and should need hammer o-ring replaced (translates to needs new valve and the hammer o-ring is the only o-ring that does not need replaceing) VERY VERY CONDITION( translates to big *** finger cuttin burr on site of rail, needs new valve and all o-rings replaced except on hammer) i got a real nice barrel and a parts gun .. and as the seller stated what did you expect a working gun?? and why do you think i sold it so cheap?? I diddnt expect a working gun, I just expected what i paid for and as listed , i dont mind replacing o-rings or even a ding or two not mentioned, what i do mind is is haveing my intergrety quiestioned, piss poor packing, paying 55.00 for a parts gun and a messed up tank,trusting that a slight leak does not mean wont hold air... Big difference... BUYER BEWARE!! Sorry i could not find a feedback thread..

[woouulf]

july 7 th Did you get the carbine? Im trying to get my feedback up and runnin if you wouldn't mind (I responed that i havent received the marker yet......) july 7th.You haven't received the marker yet? Are you serious? Let me get the tracking number and see what the hell is going on, it was sent parcel post via USPS last week, I believe on tuesday.....( of course never got back to me with tracking info or status)

july 11 ( I contacted him in the morning that is still havent arived ,and went to the post office to check if it came.)..I only have a receipt with a shipping number, apparently it's not a "tracking number" according to USPS, just proof of shipment. The fact that you still have not received it makes me worried. ( package was at post office I email him to tell him the packing was not good , tank o-ring seat was damaged, gun had a big burr on the site rail , and the valve is junk and his cominication was poor. after i sent the email ,this is what was waiting in my in box) Please let me know when you get the marker. I shipped out three things that day and they all arrived already with absolutely zero problems. All were packed the same, all were sent from the very same automated USPS machine. It makes zero sense that yours has not arrived except that you may be further away, but it taking this long is a little ridiculous. I have proof of shipment, with weight, dimensions and zip code. Im going to scan that to my computer when I get home just to protect myself. (not to bad and then) I find it interesting the moment I scanned the receipt to prove I had it shipped, and told you I was doing so, it shows up. Anyways,

you're upset that a gun I said leaked in the middle.. leaks in the middle? Is that what I'm getting from this? The sight rail had the ding it before, not from shipping. You can see it in the picture. Why do you think I sold it so cheap? Because it was a flawless working marker? I've sold dozens of markers on ebay with zero issue.

Also I feel my communication was fine. As I told you, I didn't have a tracking number on it. I thought I did, but when I went to track it, it was no such thing. It was merely a shipping receipt number from the store I mailed it from.

( What ever dude , the guns valve pin was junk ,sitting like a messed up tank pin valve that needs the o-ring replaced all sideways, dang thing could not have held air! look at his listing about the leak..oh ya and cant everyone see the burr(this thing will cut fingers) on the site rail,, I didnt see it, oh it was there before shipping. hey guys wouldnt like to have that mentioned when you buy a gun in very ,very good condition.. I didnt expect a perfect gun. just wanted to replace the o-rings ,clean it up ,pop it of a few times and hang on the wall as part of my working collection of tippmanns , when the lady handed me the box i heard a ding ,ding from the tank hitting the unprotected gun and sure enough when i open the box the tank was laying on top of the gun , kinda make you mad??..anyways heres the last PM)
You are right on one thing, I said hammer o-ring when I meant valve o-ring. ( now the valve had one broken o-ring and two like pipe cleaners on the inner part and one was missing.. The only good o-ring WAS AND IS on the hammer..go figure . even the bolt o-ring was gone.so he must have had the valve out and saw it was junk.. put it back togather and sold it as haveing a slight leak.. But it worked the last time he used it.... oh buy the way i have sold over 100. guns on ebay @ 100% feedback... look it up camocow200

[Crazy685]

You never asked me for a refund, and the tank was secured with paper in the packing peanuts. I have sold dozens and dozens of markers on automags.org and ebay, and have perfect feedback. I didn't even take apart the gun, I popped air in it, heard the leak, took it to a friend who works on tippmanns and told me it had a bad oring, probably on the hammer ( I clearly misunderstood him, he must have said valve )

As I told you in PM ( the one you haven't posted ) I would gladly give a refund. I stand behind what I sell and Im sorry you were upset with the condition of the body. It was in good condition for a 14 year old gun, and Im blown away that you'd say it wasnt. Was the box sealed with my brown packing tape? Did USPS leave a notice saying they went through it?

I sent three guns that day, and this is the only issue that arrived. You aren't responsible for the valve being bad, so Im giving you your money back for the entire package. The Co2 was good, that part confuses me. It was a regular Co2 tank still in date?

[woouulf]

offered refund (last night),passed on it , Im giving the gun away and shipping it for free) FYI as per DOT rule and regs(www.Vm68.com:Official 2005 DOTregulations.com) 3AL tanks need to be inspected every 5 years ... so no, the tank is not in date .. it has a born date of 06/04..toss a gun ,tank, and barrel in good sized box with a lil newpaper = damage..wrap tank,gun and barrel + pack tightly with newspaper= safe and sound delivery everytime

[DPrekel]

That is enough. Take a breath and take it off-line.