Red & Black Millenium Spyder Body FS

spanky1205 · 03-09-2007, 11:48 PM

This Item has been traded

Thanks for looking,

BigOldSkool · 03-10-2007, 05:54 PM

Questions..

1) is this one that takes the fatter striker or the smaller one as in new spyders

2) Is it the style that needs a front block or is it threaded for an ASA into the body?

spanky1205 · 03-10-2007, 08:16 PM

Quote:

Originally Posted by BigOldSkool

Questions..

1) is this one that takes the fatter striker or the smaller one as in new spyders

Yes this style body takes the fatty striker

2) Is it the style that needs a front block or is it threaded for an ASA into the body?

It is threaded for an asa in the body it does not take a front block

Malystryx · 03-13-2007, 11:08 PM

Would you happen to have fatty internals? I need 2 sets for another marker, and I can't find a whole lot on 'em =/.

Azzy · 03-13-2007, 11:42 PM

What kind of barrel would you like? I know I have an oldschool rifled J&J.. and some cocker barrels.

LMK, really interested in one of these for a long time.

spanky1205 · 03-14-2007, 12:45 AM

Malystryx
No I do not have any fatty internals, I would look around for an older grey bodied gun on the net. About the only thing I have is a Force 3 cyclone bolt. It is a rear cocking style. If you have any more questions PM me.

Azzy
If by oldschool J&J you mean the grey barrels I have one( I have never really been a big fan of them). I really have no use for cocker threaded barrels as I have nothing that takes them. I am really not out for anything specific. It has been awhile since I have had to buy a barrel so I was hopping for some offers. I would prefer something 10"-12" and good for woods ball.

Azzy · 03-14-2007, 07:02 AM

I think I still have a 12" CP black barrel, let me take a look in the basement.

spanky1205 · 03-14-2007, 06:21 PM

Azzy, look around in your basement. That sounds about like what I need

Azzy · 03-14-2007, 08:12 PM

Got a 16" CP .689 barrel, 4.25" of porting and a good clean bore. There are some scratches longwise on the outside of the barrel, about 7 along the porting.. dont knwo if they were there before or not, this was only used by me one time before I semi retired that spyder.

LMK if you want to trade. You in need of that bolt or would you throw it in?

spanky1205 · 03-14-2007, 10:40 PM

I think a 16" barrel is going to be a bit long. Aside from the barrel I could use a good 47/3000 hpa tank or something close to that size. A revy hopper cover and a female quick release. I own a spyder, 98 custom, and a PCS US-5. If you have some other ideas for a trade let me know. Obviously the item would dictate the terms of the trade. I would not expect anyone to make an unfair trade.

I have the bolt I mentioned. If you are interested we could probably also work that into the trade. I think I saw them going for $30 new so I would think $15 used would be a good price. If you are interested I could post some pics.

03-09-2007, 11:48 PM	#1 (permalink)
spanky1205 Active Member Join Date: Jan 2007 Location: Rapid City, SD	Red & Black Millenium Spyder Body FS This Item has been traded Thanks for looking, __________________ Anthony MCB Feedback CC Feedback Last edited by spanky1205; 03-27-2007 at 05:34 PM.

03-10-2007, 05:54 PM	#2 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY	Questions.. 1) is this one that takes the fatter striker or the smaller one as in new spyders 2) Is it the style that needs a front block or is it threaded for an ASA into the body? __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry Wild Geese - Coney Isand White Fish - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB ECAP - "Making players dreams other players nightmares" COUSINS PAINTBALL

03-13-2007, 11:42 PM	#5 (permalink)
Azzy Passing through rider Join Date: Mar 2006 Location: Finleyville, PA	What kind of barrel would you like? I know I have an oldschool rifled J&J.. and some cocker barrels. LMK, really interested in one of these for a long time. __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me.... ” - Dean Alfange

03-14-2007, 12:45 AM	#6 (permalink)
spanky1205 Active Member Join Date: Jan 2007 Location: Rapid City, SD	Malystryx No I do not have any fatty internals, I would look around for an older grey bodied gun on the net. About the only thing I have is a Force 3 cyclone bolt. It is a rear cocking style. If you have any more questions PM me. Azzy If by oldschool J&J you mean the grey barrels I have one( I have never really been a big fan of them). I really have no use for cocker threaded barrels as I have nothing that takes them. I am really not out for anything specific. It has been awhile since I have had to buy a barrel so I was hopping for some offers. I would prefer something 10"-12" and good for woods ball. __________________ Anthony MCB Feedback CC Feedback

03-14-2007, 07:02 AM	#7 (permalink)
Azzy Passing through rider Join Date: Mar 2006 Location: Finleyville, PA	I think I still have a 12" CP black barrel, let me take a look in the basement. __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me.... ” - Dean Alfange

03-13-2007, 11:08 PM	#4 (permalink)
Malystryx Active Member Join Date: Jul 2006	Would you happen to have fatty internals? I need 2 sets for another marker, and I can't find a whole lot on 'em =/.

03-14-2007, 06:21 PM	#8 (permalink)
spanky1205 Active Member Join Date: Jan 2007 Location: Rapid City, SD	Azzy, look around in your basement. That sounds about like what I need __________________ Anthony MCB Feedback CC Feedback

03-14-2007, 08:12 PM	#9 (permalink)
Azzy Passing through rider Join Date: Mar 2006 Location: Finleyville, PA	Got a 16" CP .689 barrel, 4.25" of porting and a good clean bore. There are some scratches longwise on the outside of the barrel, about 7 along the porting.. dont knwo if they were there before or not, this was only used by me one time before I semi retired that spyder. LMK if you want to trade. You in need of that bolt or would you throw it in? __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me.... ” - Dean Alfange

03-14-2007, 10:40 PM	#10 (permalink)
spanky1205 Active Member Join Date: Jan 2007 Location: Rapid City, SD	I think a 16" barrel is going to be a bit long. Aside from the barrel I could use a good 47/3000 hpa tank or something close to that size. A revy hopper cover and a female quick release. I own a spyder, 98 custom, and a PCS US-5. If you have some other ideas for a trade let me know. Obviously the item would dictate the terms of the trade. I would not expect anyone to make an unfair trade. I have the bolt I mentioned. If you are interested we could probably also work that into the trade. I think I saw them going for $30 new so I would think $15 used would be a good price. If you are interested I could post some pics. __________________ Anthony MCB Feedback CC Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search