|Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here|
| ||Thread Tools||Search this Thread|
|04-07-2011, 10:07 AM||#1 (permalink)|
Join Date: Sep 2008
Smartech and Type-R Part out Sale
I have a huge excess of Smartech A005 and Rex Type-R Markers. I will sell these as cheaply as I can to you guys. I can reduce some cost for bulk, I have lots of this stuff and quantity is not a problem.
Smartech A005 Spyder Clone paintball gun (sold as-Is). These might work fine or they may might have issues (primarily sear catching issues.) Some have a tendency to rapid fire if the sear is sitting too low. This can be adjusted or modified, but I don't have the time and frankly I'm just tired of having all of them around. A savvy tinkerer with a working knowledge of spyder type guns could probably get these to work well.
Whole Gun Price: $44 shipped to USA ($55) Shipped to Canada.
- Parts for Sale Separately Below:
Pic of Smartech Gun (more below)
I also have brand new unfired Type-R guns. Nothing is defective and each one will be aired and dry fired prior to shipping. These are great guns for the money and I have a lot of them:
Whole Gun Price: $55 shipped to USA ($65) Shipped to Canada.
Another Pic of the Rex Type-R marker - Brand New Gun w/o heavy case, .693 cocker barrel, or barrel cover $44 shipped to usa $55 shipped to canada. These cases are heavy and take up a lot of space in a package. I can do better multiple deals if the case is not wanted.
Parts Info and Prices:
-Shipping for parts will be cheap USPS unless there is a bunch of stuff. Condition will be new/unused. I think that the pictured model was test unit, so the parts you get should be cleaner.
Smartech E Grips. Semi, 3 Round and Full Auto. I have put these on other makers' guns such as spyder and tacamo. Some modifying may be needed. The screw pattern under the grip is diagonal, but there is a lot of meat for tapping inline threads. The parts within the grip can be used to fix all sorts of electronic sear trippers - or to make a new one.
I'll sell a complete egrip for $10+shipping; I'll sell a stripped grip for 5+shipping.
Smartech PCB Board: $5 w/ free shipping
Works great; same capacitor as spyders and many others. Semi, 3-Burst + full auto. I have subbed out the solenoid with many things. I have also transplanted this board into other guns. I've used the capacitor to repair failed ones in spyders and others.
Boxing for Smartech. Guns ship in their original foam backed box with allen wrenches, o-rings and an extra velocity spring.
Rex hard case $5 + shipping. Shipping gets a lot cheaper if you want a bunch of these. The stickers peal right off.
Type-R Stripped Body $7 + shipping
Bolt $2 + Short bolt with quick release $3 + shipping
Frame w a pretty decent trigger / switch $6 + shipping
Board assembly with bounce beam eyes. $9 w/ free shipping
I have gotten these to work in sear tripper guns. Configure Dwell, eyes and max ROF from the jumper switches. The 16 6800 capacitor is extremely common.
Bounce beam eye cover $1 + shipping
LPR Assembly $8 + shipping
This threaded lpr comes with a slide-in adapter. This lpr will fit into the front of many spyders where the front block attached. It is retained by a screw (included) and sealed by two orings (the normal 015 tank o-ring size). Use this to make a spyder into a timmy or a FASOR type marker. This piece some in two parts (threaded lpr and adapter - I'm sure the thread on the reg itself is compatible with other things, but I haven't looked into it). The outbound port seems to be threaded in the standard 10/32 as most are.
Here is a picture of an LPR on a spyder mr1. The screw holes do line up.
Here is a comparison of the Rex lpr and the original MR1 plug.
10/32 fitting w/ reinforcement: $2 + ship
These are great little fittings of you have a project that involves running from a 10/32 port. I've never seen one fail on the field. These are screwed with a flat screwdriver and have a swivel action until tightened all the way. Actual thread may be metric(as much of the gun is), but I've never had issues with 10/32.
Type R Rammer/Sleeve/Return Spring Assembly $9 + ship
Type-R Gas Valve Solenoid w/ micro line $11 Shipped
Robust, fast and rebuildable. Perfect for all kinds of projects. Already have a blown out (over pressurized) type-r? This will get you going.
Pic of the Solenoid with the center removed. Rebuild this with shocker manifold o-rings.
Valve, Pin, Cup Seal, and Spring. $12 Shipped
The valve is a dream come true for many projects and probably the nicest feature of the gun. The Stem rides on a nylon seal to slide smooth ad seal out the blowback gas. This is perfect for special pump projects. I will include the retention screw. This valve is honestly too nice to be in a gun of this price. I've always found the type-r to be really efficient and this valve is a big part of why that is the case.
Vertical ASA Adapter $1.50 ea. + shipping
Has screw and gasket to match. These would work fine on cockers and similar also.
Pricing on anything that is not separately listed needed? Just ask or pm me.
More Smartech Parts are to be listed soon...
|04-07-2011, 11:10 AM||#2 (permalink)|
Join Date: Oct 2006
Anybody know how hard it'd be to Double Trouble up a couple of those Type Rs? Like link two guns to one e-trigger?
|04-07-2011, 12:22 PM||#3 (permalink)|
|04-07-2011, 12:53 PM||#4 (permalink)|
Join Date: Oct 2006
|04-07-2011, 12:55 PM||#5 (permalink)|
What is the OD on the valve?
RIP - Ed "BigDaddy" Roth and "Indian" Larry
Wild Geese - Coney Isand White Fish - ECA
What Serial Number Is Your Cocker? WTB
ECAP - "Making players dreams other players nightmares"
|04-20-2011, 01:38 AM||#8 (permalink)|
Any idea what triggers would fit the Type-R? I'd like a sling trigger--at least I think that's what it's called..... Similar to the stock trigger on a Dangerous Power G4.
One like this (minus the dots)
Nemo Me Impune Lacessit
Nemo Malus Felix
|Thread Tools||Search this Thread|