Quest, G3, Mini, Freestyle, barrels, parts

zachsdad86 · 01-21-2012, 09:30 PM

Gloss black invert mini. Condition is good with normal wear and tear, does not have any problems. No barrel. Has the current poppet parts. $180 shipped

First Endeavor, FEP Quest. Gold Bolt, snatch grip, WAS board, CP ASA, 007 barrel. Has quite a bit of breach wear, but the rest of the marker is in great condition.marker worked fine when I used it last, but it just hangs on the wall now. Will be tested before I ship. $205 shipped

04 Gen 2 Indian Creek ICD freestyle. Outside this thing looks great, except for the ding mark on the rear of the block. When I got it, there were a host of problems all of which are now fixed. The only one that may be a concern to the buyer is the solenoid screws in the manifold were stripped out, so the manifold has been tapped for 2-56 screws. This will not be a problem unless you take it apart and lose a solenoid screw, but Radio Shack sells 2-56 screws. The stock HPR is not tested, since most people change them out. It has been cleaned, orings changed throughout the marker and regulators, and test fired. Does not leak or show any problems. Has the non-HE style bolt. $120 shipped

07/09 Proto Rail, PMR. UL frame with a CP trigger that has the board swapped with a PM7 (I think). Most important thing is that the eyes are not ribbon style. I added a set of wired eyes with a red emitter (aka "laser"). Eclipse HPR, Hybrid Hedloc lever feedneck, Hybrid quarter turn ASA, New CK grips, spring detents, a DP fusion (??) barrel. Everything is aluminum, no plastic on this marker. I have not played with this marker since I got it back together, but has been test fired in the yard successfully. Will be tested prior to shipping. $195 shipped.

Bob Long Marq feedneck collar. has wear. includes the wedge and screw. $15 shipped.

Hula Popper · 01-21-2012, 10:06 PM

PMed you

cs900 · 01-22-2012, 02:15 PM

interested in the freestyle....PMing

zachsdad86 · 01-24-2012, 07:05 PM

bumping

zachsdad86 · 01-30-2012, 10:13 AM

bumping

Grendal50 · 02-03-2012, 09:29 AM

Pm'ing

zachsdad86 · 02-09-2012, 09:37 PM

updated and prices adjusted.

chrismx22 · 02-10-2012, 07:57 PM

angel a1 for quest and mini?

01-21-2012, 09:30 PM	#1 (permalink)
zachsdad86 Active Member Join Date: Jan 2008 Location: Where independence was won!	Quest, G3, Mini, Freestyle, barrels, parts Gloss black invert mini. Condition is good with normal wear and tear, does not have any problems. No barrel. Has the current poppet parts. $180 shipped First Endeavor, FEP Quest. Gold Bolt, snatch grip, WAS board, CP ASA, 007 barrel. Has quite a bit of breach wear, but the rest of the marker is in great condition.marker worked fine when I used it last, but it just hangs on the wall now. Will be tested before I ship. $205 shipped 04 Gen 2 Indian Creek ICD freestyle. Outside this thing looks great, except for the ding mark on the rear of the block. When I got it, there were a host of problems all of which are now fixed. The only one that may be a concern to the buyer is the solenoid screws in the manifold were stripped out, so the manifold has been tapped for 2-56 screws. This will not be a problem unless you take it apart and lose a solenoid screw, but Radio Shack sells 2-56 screws. The stock HPR is not tested, since most people change them out. It has been cleaned, orings changed throughout the marker and regulators, and test fired. Does not leak or show any problems. Has the non-HE style bolt. $120 shipped 07/09 Proto Rail, PMR. UL frame with a CP trigger that has the board swapped with a PM7 (I think). Most important thing is that the eyes are not ribbon style. I added a set of wired eyes with a red emitter (aka "laser"). Eclipse HPR, Hybrid Hedloc lever feedneck, Hybrid quarter turn ASA, New CK grips, spring detents, a DP fusion (??) barrel. Everything is aluminum, no plastic on this marker. I have not played with this marker since I got it back together, but has been test fired in the yard successfully. Will be tested prior to shipping. $195 shipped. Bob Long Marq feedneck collar. has wear. includes the wedge and screw. $15 shipped. __________________ MCB feedback icd-owners feedback pbnation feedback Ebay Last edited by zachsdad86; 02-09-2012 at 09:37 PM. Reason: updating

01-24-2012, 07:05 PM	#4 (permalink)
zachsdad86 Active Member Join Date: Jan 2008 Location: Where independence was won!	bumping __________________ MCB feedback icd-owners feedback pbnation feedback Ebay

01-30-2012, 10:13 AM	#5 (permalink)
zachsdad86 Active Member Join Date: Jan 2008 Location: Where independence was won!	bumping __________________ MCB feedback icd-owners feedback pbnation feedback Ebay

02-03-2012, 09:29 AM	#6 (permalink)
Grendal50 MCB Member Join Date: Jul 2008 Location: North of Worcester, Ma.	Pm'ing __________________ "Some people say that I must be a terrible person, but it's not true. I have the heart of a young boy in a jar on my desk." -Stephen King http://www.mcarterbrown.com/forums/f...-feedback.html

02-09-2012, 09:37 PM	#7 (permalink)
zachsdad86 Active Member Join Date: Jan 2008 Location: Where independence was won!	updated and prices adjusted. __________________ MCB feedback icd-owners feedback pbnation feedback Ebay

01-22-2012, 02:15 PM	#3 (permalink)
cs900 master of carbon Join Date: Jan 2010 Location: Binghamton, NY	interested in the freestyle....PMing

02-10-2012, 07:57 PM	#8 (permalink)
chrismx22 Newbie Join Date: Aug 2011	angel a1 for quest and mini?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search