Palmer STB, 15 degree ASA, and AKA Feedneck

PenguinMan · 03-25-2012, 01:14 PM

A few Cocker odds and ends for sale today...

I had gotten these over the past few years with the intent of doing a pump project on the body, as well as a different Cocker project with the rest of the parts. However, I had back surgery back in December and haven't even played paintball in the last two years, so I'm not really planning on getting back on the field any time soon. At this point, I'd prefer to clear up some space and put the money towards a new Canon 60D.

1. Halfblock, Midgeted Mini Merlin Body - $75 shipped - SOLD
Included:
-Original front block
-Halfblock bolt and sled
-Halfblock hammer (never used)
-Tornado valve
-Hammer spring
-Second hammer (not milled for a halfblock kit)
-Those two pump rods, which I think are full length (so might not be of much use!)
-Those eye covers
-Feedneck

The body is in good condition, but the halfblocking job could use a little polishing up (see picture). Also, it was unfortunately drilled for eyes.

2. Pre-2k AKA Mitey Max LPC - $20 shipped - SOLD

3. Palmer STB - $20 shipped.
Decent condition, but hasn't been tested in a long time.

4. Psychoballistics Ram - $12 shipped - SOLD
I honestly don't know what it is. Good condition, can probably use a little lube.

5. AIM 3-way - $12 shipped - SOLD

6. Miscellaneous Cocker Springs - $12 shipped - SOLD
Lots of colors.

7. Cocker Valve Tool - SOLD

8. KAPP Single Trigger Slider Frame, Black - $45 shipped - SOLD

9. DBN 15 Degree ASA, NIB - $15 shipped - SOLD
Has a locking collar to lock it in any position you want. Still sells for $20 shipped on Dan's website.

10. Feedneck, NIB - $15 shipped
It's labeled a CCM AKA No-Rise, but I actually don't think it's one. I believe it has AKA threads though.

11. 12g Quick Changer - $12 shipped - SOLD

Picture of everything:

The halfblocking:
http://www.tsmg.org/IMG_6815.jpg

The springs and valve tool:

KAPP Slider Frame:
http://www.tsmg.org/IMG_6835.jpg

ASA and Feedneck:

12g Quick Change:

Feel free to make an offer on anything above. The worst that I can do is say no!

Thanks for looking.

paintballedbackin88 · 03-25-2012, 01:24 PM

Are you willing to part just the halfblock bolt, pin, and sled?

PenguinMan · 03-25-2012, 01:25 PM

Not at this point. Maybe in the future though if I have trouble selling everything.

I'll PM you if I ever decide to, how about that?

paintballedbackin88 · 03-25-2012, 01:27 PM

Quote:

Originally Posted by PenguinMan

Not at this point. Maybe in the future though if I have trouble selling everything.

I'll PM you if I ever decide to, how about that?

Sounds great. Good luck with sale.

wd3d · 03-25-2012, 01:29 PM

What condition is the Kapp frame?

PenguinMan · 03-25-2012, 01:33 PM

KAPP frame is in pretty good condition - I'll PM you some more pictures.

wd3d · 03-25-2012, 01:37 PM

Ok. I am interested

PenguinMan · 03-25-2012, 02:05 PM

KAPP Frame is sold to wd3d.

Dysturbed87 · 03-25-2012, 02:41 PM

Pm sent

PenguinMan · 03-25-2012, 06:35 PM

The Merlin body is sold!

Dysturbed87 - I replied to your PM.

All other PM's should be responded to by now as well.

03-25-2012, 01:14 PM	#1 (permalink)
PenguinMan Rec Poster Join Date: May 2006 Location: Houston, TX	Palmer STB, 15 degree ASA, and AKA Feedneck A few Cocker odds and ends for sale today... I had gotten these over the past few years with the intent of doing a pump project on the body, as well as a different Cocker project with the rest of the parts. However, I had back surgery back in December and haven't even played paintball in the last two years, so I'm not really planning on getting back on the field any time soon. At this point, I'd prefer to clear up some space and put the money towards a new Canon 60D. 1. Halfblock, Midgeted Mini Merlin Body - $75 shipped - SOLD Included: -Original front block -Halfblock bolt and sled -Halfblock hammer (never used) -Tornado valve -Hammer spring -Second hammer (not milled for a halfblock kit) -Those two pump rods, which I think are full length (so might not be of much use!) -Those eye covers -Feedneck The body is in good condition, but the halfblocking job could use a little polishing up (see picture). Also, it was unfortunately drilled for eyes. 2. Pre-2k AKA Mitey Max LPC - $20 shipped - SOLD 3. Palmer STB - $20 shipped. Decent condition, but hasn't been tested in a long time. 4. Psychoballistics Ram - $12 shipped - SOLD I honestly don't know what it is. Good condition, can probably use a little lube. 5. AIM 3-way - $12 shipped - SOLD 6. Miscellaneous Cocker Springs - $12 shipped - SOLD Lots of colors. 7. Cocker Valve Tool - SOLD 8. KAPP Single Trigger Slider Frame, Black - $45 shipped - SOLD 9. DBN 15 Degree ASA, NIB - $15 shipped - SOLD Has a locking collar to lock it in any position you want. Still sells for $20 shipped on Dan's website. 10. Feedneck, NIB - $15 shipped It's labeled a CCM AKA No-Rise, but I actually don't think it's one. I believe it has AKA threads though. 11. 12g Quick Changer - $12 shipped - SOLD Picture of everything: The halfblocking: http://www.tsmg.org/IMG_6815.jpg The springs and valve tool: KAPP Slider Frame: http://www.tsmg.org/IMG_6835.jpg ASA and Feedneck: 12g Quick Change: Feel free to make an offer on anything above. The worst that I can do is say no! Thanks for looking. __________________ Beware: The penguins attack at dawn... Last edited by PenguinMan; 03-27-2012 at 11:22 PM.

03-25-2012, 01:24 PM	#2 (permalink)
paintballedbackin88 Seasoned Member Join Date: Dec 2011 Location: Los Angeles	Are you willing to part just the halfblock bolt, pin, and sled? __________________ "Remember, you don't have to outrun the dragon. You only have to outrun the slowest member of your party." mcb feedback Customcockers.com feedback My Collection

03-25-2012, 01:25 PM	#3 (permalink)
PenguinMan Rec Poster Join Date: May 2006 Location: Houston, TX	Not at this point. Maybe in the future though if I have trouble selling everything. I'll PM you if I ever decide to, how about that? __________________ Beware: The penguins attack at dawn...

03-25-2012, 01:29 PM	#5 (permalink)
wd3d MCB Member Join Date: Nov 2008 Location: Clever Mo.	What condition is the Kapp frame? __________________ MCB FEEDBACK WHAT I WANT TO BUY

03-25-2012, 01:33 PM	#6 (permalink)
PenguinMan Rec Poster Join Date: May 2006 Location: Houston, TX	KAPP frame is in pretty good condition - I'll PM you some more pictures. __________________ Beware: The penguins attack at dawn...

03-25-2012, 01:37 PM	#7 (permalink)
wd3d MCB Member Join Date: Nov 2008 Location: Clever Mo.	Ok. I am interested __________________ MCB FEEDBACK WHAT I WANT TO BUY

03-25-2012, 02:05 PM	#8 (permalink)
PenguinMan Rec Poster Join Date: May 2006 Location: Houston, TX	KAPP Frame is sold to wd3d. __________________ Beware: The penguins attack at dawn...

03-25-2012, 02:41 PM	#9 (permalink)
Dysturbed87 Seasoned Member Join Date: Mar 2009 Location: Columbia, SC	Pm sent __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

03-25-2012, 06:35 PM	#10 (permalink)
PenguinMan Rec Poster Join Date: May 2006 Location: Houston, TX	The Merlin body is sold! Dysturbed87 - I replied to your PM. All other PM's should be responded to by now as well. __________________ Beware: The penguins attack at dawn...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search