Tinkerer parts sale

tjd10684 · 08-15-2012, 10:24 PM

OK as some of you know I am a slightly above average tinkerer. As such I have a TON of stuff just laying around doing nothing and I can use some extra money (cant we all?) So I am going to sell some of it off.

OK well start off with some Clippard parts.

Were going to start from the top left to right
number - clippard part# - number I have - price
1. 5000-4-ENP - 50 - 0.75 ea
2. 12841 - 40 - 40 - 1.00 ea
3. 11752-5 - 15 - 1.00 ea
4. 15002-5 - 14 - 1.00 ea

5. 5000-4 - 50 - 0.50 ea
6. smav-3 - 7 - 15.00 ea
7. mav-3c - 6 - 10.00 ea
8. 11750-2 - 15 - 0.50 ea

Next is the hose section

you can see most are standard autococker lp hose 1/16 id 1/8 od these would be 1.00 per ft

You can also see the black and "white" tubes marked high pressure can be used in ions and are marked to have a working pressure of 450 psi. I am using this in my mech ion with no problems. This would be 1.25 per foot

Here is some more hose.

the black and red hose looks like macro line but it has a MUCH lower working pressure DO NOT USE AS MACROLINE IT WILL BLOW UP. It measures 1/4 od 1/8 id. I am using this in my mech ion running at 175 psi no problem. price will be 0.75 per ft

the other black hose is a high pressure direct replcment for the large ion hose rated at 350 psi noted on the side. price is 1.25 per ft

In the box I have some Pneumadyne barbed fittings. 10-32 to 1/8 barbed fitting. these work exceptionally well with the low pressure black and red hose 1.00 each

Shipping is going to be just about $6 for most parts so I removed the price of shipping from some parts and shipping will be tacked on to the end of the order so your not paying for shipping twice. paypal is included in the price of the part still. Bottom line is if you buy one brass tube fitting I still have to pay $6 for shipping so the more you buy the more you get out of the shipping cost.

If you have any questions about any of the stuff I have listed here please feel free to ask.

Edit: updated pricing to remove shipping costs from part

tjd10684 · 08-17-2012, 12:24 PM

bump

jerryjjackson69 · 08-17-2012, 03:27 PM

EDIT: Nevermind, sorry.

Nobody · 08-17-2012, 04:35 PM

interested in a few things. need to look them up at clippard. posting to find this better. will get back to you.

tjd10684 · 08-22-2012, 09:39 PM

bump

LT.Dan · 12-13-2012, 08:22 PM

got any of this left?

tjd10684 · 12-16-2012, 06:27 PM

most of it actually what are you looking for?

LT.Dan · 12-16-2012, 06:31 PM

A couple of smav3. Going to send you a pm

Orpackrat · 12-18-2012, 09:01 AM

PM sent.

chplnstone · 12-19-2012, 07:39 PM

pm'ed

08-15-2012, 10:24 PM	#1 (permalink)
tjd10684 MCB Member Join Date: Jul 2009 Location: Beaver Falls PA (outside Pittsburgh)	Tinkerer parts sale OK as some of you know I am a slightly above average tinkerer. As such I have a TON of stuff just laying around doing nothing and I can use some extra money (cant we all?) So I am going to sell some of it off. OK well start off with some Clippard parts. Were going to start from the top left to right number - clippard part# - number I have - price 1. 5000-4-ENP - 50 - 0.75 ea 2. 12841 - 40 - 40 - 1.00 ea 3. 11752-5 - 15 - 1.00 ea 4. 15002-5 - 14 - 1.00 ea 5. 5000-4 - 50 - 0.50 ea 6. smav-3 - 7 - 15.00 ea 7. mav-3c - 6 - 10.00 ea 8. 11750-2 - 15 - 0.50 ea Next is the hose section you can see most are standard autococker lp hose 1/16 id 1/8 od these would be 1.00 per ft You can also see the black and "white" tubes marked high pressure can be used in ions and are marked to have a working pressure of 450 psi. I am using this in my mech ion with no problems. This would be 1.25 per foot Here is some more hose. the black and red hose looks like macro line but it has a MUCH lower working pressure DO NOT USE AS MACROLINE IT WILL BLOW UP. It measures 1/4 od 1/8 id. I am using this in my mech ion running at 175 psi no problem. price will be 0.75 per ft the other black hose is a high pressure direct replcment for the large ion hose rated at 350 psi noted on the side. price is 1.25 per ft In the box I have some Pneumadyne barbed fittings. 10-32 to 1/8 barbed fitting. these work exceptionally well with the low pressure black and red hose 1.00 each Shipping is going to be just about $6 for most parts so I removed the price of shipping from some parts and shipping will be tacked on to the end of the order so your not paying for shipping twice. paypal is included in the price of the part still. Bottom line is if you buy one brass tube fitting I still have to pay $6 for shipping so the more you buy the more you get out of the shipping cost. If you have any questions about any of the stuff I have listed here please feel free to ask. Edit: updated pricing to remove shipping costs from part __________________ My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817 I also freak bore http://www.mcarterbrown.com/forums/a...ml#post2393405 A wise man once said: "The gap between theory and reality is not as far in theory as it is in reality." Last edited by tjd10684; 08-16-2012 at 12:47 PM.

08-17-2012, 12:24 PM	#2 (permalink)
tjd10684 MCB Member Join Date: Jul 2009 Location: Beaver Falls PA (outside Pittsburgh)	bump __________________ My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817 I also freak bore http://www.mcarterbrown.com/forums/a...ml#post2393405 A wise man once said: "The gap between theory and reality is not as far in theory as it is in reality."

08-17-2012, 03:27 PM	#3 (permalink)
jerryjjackson69 Active Member Join Date: Sep 2010	EDIT: Nevermind, sorry. __________________ Feedback: http://www.mcarterbrown.com/forums/f...ml#post1911870 Last edited by jerryjjackson69; 08-17-2012 at 03:33 PM.

08-22-2012, 09:39 PM	#5 (permalink)
tjd10684 MCB Member Join Date: Jul 2009 Location: Beaver Falls PA (outside Pittsburgh)	bump __________________ My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817 I also freak bore http://www.mcarterbrown.com/forums/a...ml#post2393405 A wise man once said: "The gap between theory and reality is not as far in theory as it is in reality."

12-16-2012, 06:27 PM	#7 (permalink)
tjd10684 MCB Member Join Date: Jul 2009 Location: Beaver Falls PA (outside Pittsburgh)	most of it actually what are you looking for? __________________ My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817 I also freak bore http://www.mcarterbrown.com/forums/a...ml#post2393405 A wise man once said: "The gap between theory and reality is not as far in theory as it is in reality."

12-13-2012, 08:22 PM	#6 (permalink)
LT.Dan Active Member Join Date: May 2009 Location: winnipeg canada	got any of this left?

12-16-2012, 06:31 PM	#8 (permalink)
LT.Dan Active Member Join Date: May 2009 Location: winnipeg canada	A couple of smav3. Going to send you a pm

12-18-2012, 09:01 AM	#9 (permalink)
Orpackrat MCB Member Join Date: Jun 2007 Location: Salem OR	PM sent. __________________ Metadyne Pump # 1161 http://walkons.proboards.com/index.cgi? FS Custom 13/3000 Tank Covers Paracord $35 http://www.mcarterbrown.com/forums/m...ord-%2435.html

12-19-2012, 07:39 PM	#10 (permalink)
chplnstone brassmage and necrotech Join Date: Jan 2007 Location: cape may, new jersey	pm'ed __________________ Chaotic Creations Ltd. http://www.mcarterbrown.com/forums/a...ml#post2095803 sales: http://www.mcarterbrown.com/forums/b...ault-line.html happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search