|Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here|
| ||Thread Tools||Search this Thread|
|11-17-2012, 02:30 PM||#1 (permalink)|
E-Tac Operator =
Join Date: Apr 2010
Emag lowers - Sold
>PayPal Verified or U.S. Postal Money Order Only
>See my feedback on A5OG, X7OG, MCB, AO, PBN, and PBL.
>I communicate quickly and courteously. I'll leave feedback after I know you received the item. If I forget, just ask.
>All prices include PayPal fees; Actual shipping is extra unless price is marked "shipped"
>"Shipped" prices are lower 48 U.S., additional shipping may be needed for elsewhere.
Trades of interest: Two 7rd TPX mags; like new TechT TPX MRT bolt kit; TechT TPX iFit kit
On the fence? Make me an offer!
Beautiful gloss black Emag lowers, with ULE milled gloss black Emag rail. The board has Xmod 1.8 firmware. Everything tested and works. Comes with complete lowers as pictured, rail, battery, AGD black rubber grips, standard yellow battery cutoff pin, Emag-to-warp cable, and charging block.
The charging block puts out 25.2 volts when hooked up to my 12VDC 1.5A wall plug (not included). It does turn red when you put a low battery on it, but then it turns back green quickly. This doesn't seem to affect performance, though, since it's still putting out 25 volts to charge. You will need to get your own wall or car plug (12volts, 1 or 1.5 amp, positive tip).
The battery charges up to 18.25 volts. After a week (and a couple times playing with PR-T mode), it still showed 17.98 volts, so it appears that it's good. Right now, at least three weeks post-charge, it still shows 17.85v and this is a 16.8v battery so it appears it's good to go. The battery is OEM but may be a replacement, not an original, because the AGD logo is not screen printed on the side. Instead, "Airgun Designs" is printed, dot matrix style, on the side.
Again, everything has been tested and is working perfectly. You may need to fine tune the trigger to your liking ( E-Mag Trigger Adjustment ).
Post in this thread and then PM so that I get an email notification. I'll respond ASAP and for fairness will check the timestamps of the posts in the thread.
Last edited by Justus; 12-14-2012 at 11:21 AM.
|11-18-2012, 11:11 PM||#4 (permalink)|
Join Date: Dec 2010
Location: Ontario Canada
you mean we cant just do that straight ? I doubt I would be able to add even close to what you want.
|Thread Tools||Search this Thread|