FS: CCM 45 frame w/ autotrigger cam (used, dust black)
Includes dust black, CCM 45 trigger frame, dust black beavertail, polished black autotrigger cam, CCM wraparound grips, grip frame screws, softer sear spring, and Freeflow flat sear lug.
The frame has been used for years. This is an older frame that does not have the hole for autotrigger retention. Some sharp edges have been filed down under the trigger guard and near the beavertail.
A brass washer is installed between the sear and frame to reduce sear play.
Grip tape is on front and back straps and will leave residue if removed.
I believe I installed a harder sear spring and no longer have the stock spring, but I will include an alternate soft sear spring.
Autotrigger cam arm is heavily worn where it contacts the shoulder screw. One of the small pins that keep the arm from spinning on the cam was lost and was replaced with a trimmed watch band pin.
Shoulder screw hole is nearly stripped but the threads for the pump arm are intact.
The flat Freeflow sear lug permits greater autotrigger point repeatability.
I will disconnect the beavertail from the frame prior to shipping and recommend using a thread locker if you reinstall it.
This is well-used, playing-quality equipment. Thanks for looking!
$55 shipped USA
Now $65 shipped!
one more bump
SO everything works and I could put this on a gun no problem?
Yup. You'd need a pump arm for the AT cam.
LMK if you'll take $50 shipped for it.
il take the autotrigger if youl part!
Now $55 shipped!
|All times are GMT -4. The time now is 10:38 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC