Buy, Sell, Trade

[bacci paintball]

Update: I am very busy during the week so I usually only respond to pms on the weekends and it generally takes a week for a package to go out. Sometimes a little less, sometimes a little more. You can pm me anytime and inquire about the status of your package though.

So I am basically finished with college, my last unit is an internship which I am working on now, and I have been working on this sale for the past few months in some of my free time away from my job and that internship. My degree is a BFA in Digital Art, and no it wasn’t from an art school, which can be both a good thing and a bad thing. Check out my website here: The Art of Dan Bacci

Total number of items is 1685 (not including multiples) which is more than twice the number of items I had in my last sale and there are 197 pictures of different items.



To find a specific parts shouldn’t be that hard but while your looking you might as well get out a piece of paper and a pencil or open up a text file so you can jot the other items that you come across down.



Remember: ctrl+f is find (in Mozilla) and it can really help out with finding out whether or not a I have a specific part listed. Also consult the table of contents below.



Since there are so parts in this sale here is a brief break down of the parts broken down into categories by pictures:

1-31 Nelson based pump gun parts

32-43 Sheridan parts

44-63 Cocker parts

64-81 Mag parts

82-96 Stack Tube Blow Back parts

97-100 Tippman parts

101-109 Misc Guns Parts (Montneel and clones, VM, Sterling and Sovs, BE, Angels and Electros, Feednecks, misc…)

110-117 Grips, Trigger guards, and trigger shoes

118-120 Sights and Muzzle Brakes

121-136 Air parts (Regs, ex chambers, 12 gram changers, asas, fittings, lines, gauges ect…)

138-140 Drops and rails

141-143 Stocks (12 gram stocks, asa stocks, Shoulder stocks, misc)

144 Stock feeds

145-158 Barrels (Autococker, mag, spyder, line Si/ Montneel, blazer, Tippman, ect...)

159-165 Tanks (Co2 tanks, hpa tanks, siphon tubes, neoprene covers, butt plates, valves, thermo valves, ect…)

166-170 Hoppers (old hoppers, electronic hoppers, neoprene covers, hopper parts)

171-174 Mask Parts (Vents, JTs, AGDs, Parts, misc…)

175-177 Misc Gear (Gloves, Squeegies, Knee pads, misc…)

178-190 Large Packs, Harnesses, and Stock Class Harnesses with stylin’ pics!

191-195 Small Packs

196 10rd tubes

197 Barrel Plugs



I will be listing more parts as time goes on and will list them with the similar items and have the new items also at the top of the page.



As for payment I accept paypal or USPS money orders (please USPS only).



Prices do not include shipping: I ship once a week, usually on Wednesdays and will only be shipping via USPS so please make sure your address is compatible with that.



Trades: Yes, I am always interested in trades, please see my list at the end of the sale items.





1. Stock Nelson Parts

1. Bolt, one bolt hole, light rust/ corrosion -3 sold (6-23-08)
2. Bolt, one bolt hole, light rust/ corrosion -3 gone (9-11-08)
3. Bolt, one bolt hole, light rust/ corrosion -3 gone (9-11-08)
4. Bolt, No rust light wear – 4 sold (2-9-08)
5. Bolt, No rust light wear – 4
6. Bolt, one bolt hole, light rust/ corrosion -3
7. Bolt, No rust light wear, good shape, missing some blue -5 gone (9-11-08)
8. Bolt, Light wear -4
9. Bolt Light, heavy wear -3
10. Bolt, one bolt hole, light rust/ corrosion -3
11. Bolt, one bolt hole, light rust/ corrosion -3
12. Bolt, Heavy Rust -2 gone (9-11-08)
13. Bolt, No rust light wear – 4
14. Stock Hammer, great shape -4 gone (9-11-08)
15. Stock Hammer, excellent shape -5 sold (2-9-08)
16. Stock Hammer, excellent shape -5 gone (9-11-08)
17. Stock Hammer, great shape -4 gone (9-11-08)
18. Stock hammer, heavy rust -3 gone (9-11-08)
19. Stock hammer, heavy rust -3





2 Trracer/ Maverick/ Ravorback/ Blackwidow/ ect clone internals

20. Stock maverick/trarcer bolt, not velocity adjustable, great shape, aluminum -5 sold (10-11-07)
21. Stock maverick/trarcer bolt, not velocity adjustable, great shape, aluminum -5 sold (4-28-08)
22. Stock maverick/trracer bolt, not velocity adjustable, okay shape, aluminum -5 sold (4-28-08)
23. Stock maverick/trracer bolt, not velocity adjustable, covered in paint, aluminum -5 sold (4-28-08)
24. stainless velocity adjustable, new shape -15 sold (10-7-07)
25. Stainless, I believe this is a razorback stock bolt -7 sold (10-11-07)
26. Stainless, I believe this is a razorback stock bolt -7 sold (10-8-07)
27. Aluminum velocity adjustable bolt, heavy use, -8 sold (11-06-07)
28. Velocity adjustable hornet bolt -6 sold (5-30-08)
29. Velocity adjustable hornet bolt -6 sold (5-30-08)
30. Ventri bolt for a hornet – non adjustable, new shape -8 sold (3-29-08)
31. Ventri bolt for a hornet – non adjustable, new shape -8 sold (3-29-08)
32. trracer/ maverick/ razorback/ blackwidow hammer -6 sold (3-30-08)
33. trracer/ maverick/ razorback/ blackwidow hammer -6 sold (10-8-07)
34. trracer/ maverick/ razorback/ blackwidow hammer -6 sold (10-8-07)
35. trracer/ maverick/ razorback/ blackwidow hammer, no sear -3 sold (11-05-07)
36. Rough, corrosion, complete -4 sold (12-17-07)
37. Darkside ram bolt and hammer -10
38. Darkside ram bolt and hammer -10





3. Nelson Breech Drop Bolts

39. Stainless breech bolt, 2x holes for pump arm screws, used, non velocity adjustable -6
40. Stainless breech bolt, 2x holes for pump arm screws, looks new and came with lapco bolts do is probably lapco, non velocity adjustable -7 sold (12-29-07)
41. Stainless breech bolt, 2x holes for pump arm screws, looks new and came with lapco bolts do is probably lapco, non velocity adjustable -7 sold (3-2-08)
42. Stainless breech bolt, 2x holes for pump arm screws, looks new and came with lapco bolts do is probably lapco, non velocity adjustable, stamped patent sold and has a backwards three -7
43. Stainless breech bolt, 2x holes for pump arm screws, looks new and came with lapco bolts do is probably lapco, non velocity adjustable -7 sold (10-17-07)
44. Stainless non adjustable with 1x hole -5
45. steel – rusty with antichop flat -3
46. Lapco adjustable but adjuster is missing, 1x hole -5 sold (11-07-07)
47. Lapco adjustable but adjuster is missing, 1x hole -5 gone (9-11-08)
48. Lapco adjustable, new -10 gone
49. Lapco adjustable, used -8 -sold (10-7-07)
50. Adjustable, not sure if it is stainless -7 sold (5-30-08)
51. Lapco adjustable, new -10 gone
52. Lapco adjustable, new, not anti kink, new 2x holes -14 sold (3-19-08)
53. Lapco adjustable, new, not anti kink, used 2x holes -14 sold (3-30-08)
54. phantom or usi raider, rusted up inside, adjustable -6 sold (4-20-08)
55. phantom or raider – some rust –adjustable -7
56. phantom or raider stainless adjustable but missing adjuster, used -4
57. phantom or raider stainless adjustable but missing adjuster, used -4
58. stainless, adjustable but not adjuster, not drilled at all, no no holes for either a nelson or phantom style connecter rod -6
59. tippman sl-68 or sl-682 bolt, not adjustable -5 sold (11-04-07)
60. lapco new, one screw hole stainless bolt, perfect for 007s – 10 sold (3-19-08)
61. lapco new, one screw hole stainless bolt, perfect for 007s – 10 sold (3-19-08)
62. lapco new, one screw hole stainless bolt, perfect for 007s – 10 Gone
63. lapco new, one screw hole stainless bolt, perfect for 007s – 10 Gone
64. lapco new, one screw hole stainless bolt, perfect for 007s – 16 (5x available 12x sold)





4. Nelson Bore drop bolts for bushmaster, spirits, or Taso/AGS clones and many more…

65. AGS bolt , used, front half is aluminum and back is stainless, not adjustable -5
66. Bushmaster bolt, stock, rounded front -8 gone (7-26-08)
67. Bushmaster bolt, excellent shape -10 sold (12-2-07) gone (9-11-08)
68. Bushmaster bolt, excellent shape -10 sold (12-2-07) (9-16-08)
69. Bushmaster bolt, back is steel and rusted, has seen use -5 sold (3-19-08)
70. Bushmaster bolt, excellent shape -10 sold (12-2-07) (9-16-08)
71. Aluminum, black non adjustable, new -7
72. Stainless, non adjustable, new -8
73. Stainless, non adjustable, new -8
74. Stainless, non adjustable, new -8
75. Lapco, stainless, non adjustable -10
76. Stainless with steel adjuster, new -12 sold (3-30-08)
77. double oring, adjustable, new -12 sold (3-30-08)
78. old style bushmaster or ags, broken front oring slot, adjustable but no screw, used -4
79. old style bushmaster or ags, broken front oring slot, adjustable with brass adjuster screw, used -8 sold – (11-17-08)
80. old style bushmaster or ags, broken front oring slot, adjustable with brass adjuster screw, used -8
81. old style bushmaster bolt with adjuster screw, used -8 sold (9-8-08)
82. black steel with adjuster -12 (2x available)
83. lapco adjustable, used, excellent shape, stainless -14 sold (2-3-08)
84. lapco adjustable, used, excellent shape, stainless -22 (5x sold)




5. Aftermarket Hammers

85. Phantom hammer, used, great shape, flat back -10
86. Phantom hammer, used, great shape, flat back -9 sold (12-29-07)
87. Phantom hammer, used, great shape, rounded back -12 sold (12-29-07)
88. Phantom hammer, used, great shape, rounded back, doesn’t have front snub -12
89. Stock nelly hammer, great shape, light rust, -5
90. Stock nelly hammer, no sear, light corrosion on small portion, decent shape -3
91. nelson clone hammer -4 sold (3-1-08)
92. Stock nelson hammer, great shape -5
93. Stock nelson hammer, light rust -3 sold (6-23-08)
94. stock nelson hammer, no sear, some rust -2
95. Nelson clone hammer, great shape -4
96. nelson clone hammer, rust on sear -3 sold (6-10-08)
97. nelson clone hammer, probably needs a new sear -2
98. Nw hammer, close to the same dimensions as a carter, might work with newer carters or older models with a little polishing, will work in spitfires and probably also other nw undercockers -15
99. new hammer, no sear -5
100. Rusty clone hammer -3
101. Ranger hammer, no sear -5 (5x available)
102. Ranger hammer with sear, new -8 pending (10-23-08)
103. Ranger hammer with sear, new -8 sold (10-17-07)
104. Clone hammer w/pin but no sear -3





6. Line SI and Lapco hammers

105. Line SI adjustable hammer, great shape -14 (1x available 3x sold)
106. Line SI adjustable hammer with plastic set screw, great shape -15 (4x sold)
107. Line SI Velocity adjustable, dremmalled side, will work fine but not the best looking -10
108. Line SI Velocity adjustable, milled side -15 (2x available)
109. Line SI Non adjustable hammer-10 (3x sold)
110. Used heavy weight fluted Lapco hammer -9 pending (1-26-09)
111. Used Medium weight fluted Lapco hammer -9 gone
112. New Lapco Medium weight flutted hammer -12 gone
113. Brass, needs a good polishing, has stainless insert where it makes contact on base of powertube, no sear but I can put one on for 3 more -25 sold (11-07-07)
114. Lapco full stainless hammer, new -15 pending (1-26-09)
115. New Lapco Medium weight flutted hammer -14 (5x available 22x sold)
116. New Lapco Medium weight flutted hammer -10 gone
117. New Lapco Medium weight flutted hammer -10 gone
118. New Lapco Medium weight flutted hammer -10 gone
119. New Lapco Medium weight flutted hammer -10 sold (12-29-07)





7. Internal sets

120. Lapco Velocity adjustable breech drop bolt and medium weight flutted hammer. New – 20 gone
121. Lapco Velocity adjustable breech drop bolt and medium weight flutted hammer. New – 20 Sold (10-5-07)
122. Lapco Velocity adjustable breech drop bolt and medium weight flutted hammer. New – 20 -Sold (10-4-07)
123. Line Si bushmaster internals, non velocity adjustable hammer, used -12
124. Line Si Bushmaster internals, non velocity adjustable hammer in nice shape, 18 sold (6-16-08)
125. Line Si Bushmaster internals, velocity adjustable hammer, in nice shape -32 sold (10-16-07)
126. Lapco Velocity velocity adjustable stainless bore drop set with medium weight flutted hammer- 30 2x Sold




8. Lapco Powertubes (I believe the difference between the P and non P tube are that they take different threaded cupseals. The P tubes take phantom compatible cupseals.) Most are new…

127. Lapco 4 tube with valve retaining screw and cupseal -12 sold
128. Lapco 4 tube -10 (10x available 15x sold)
129. Lapco 4p tube with valve retaining screw and cupseal -12 sold
130. Lapco 4p tube -7 (uses phantom cupseals, will fit most nelsons but for phantoms will only fit older phantom internals (5x available))
131. Lapco 6 tube with valve retaining screw and cupseal sold
132. Lapco 6 tube -7 sold
133. Lapco 6p tube with valve retaining screw and cupseal -12 sold
134. Lapco 6p tube -7 sold





9. Generic Tubes (Most are used unless noted but in great shape)

135. 00 tube, good shape -10
136. 00 tube, some grime -8 -Sold (10/04/07)
137. 00 tube, some grime -8
138. 0 tube, looks like a lapco stamp but no LA stamp-10 -Sold (10/04/07)
139. 2 tube looks new -10 -Sold (10/04/07)
140. 3 tube some scrapes -8 - Sold (10/04/07)
141. 4 tube, lapco but no la stamp -6 (5x available 4x sold (10/04/07)
142. 4 tube good shape -5 (2x available)
143. 5 tube used, looks like lapco no stamp -6
144. 5 tube, good shape -7 (1x available 2x sold (10/04/07)
145. 5 tube, used with some grime -6 (2x available)
146. 6 tube with cupseal, looks lapco, no la stamp -10 sold (10-9-07)
147. 6 tube, good shape -6 sold (1-26-08)





10. More Misc tubes

148. Line si 0 tube with cupseal and valve retaining screw -12 -sold (10/04/07)
149. Line si 2 tube, looks new -12 sold (10/04/07)
150. Line si 4 tube- 10 -sold (10/04/07)
151. Line si 4 tube -10 sold (11-07-07)
152. Line si 4 tube -10 sold (3-1-08)
153. Misc tube -4
154. Stock nelly tube with no rust -4
155. Misc tube -4
156. Misc tube -4
157. Misc tube -4
158. Misc tube, has cupseal and valve retaining screw -6 sold (3-1-08)
159. Tippman sl valve tube, sl-681 style-5 (2x sold) (10-15-07) sl-68-2 style -5 (3x sold) (10-15-07)
160. sl tube with no cup seal -3 sold (10-8-07)
161. Apex tube -12 (4x available 5x sold)
162. Tracer tube -3 (5x sold) (10-20-07)
163. Traccer tube with seal and screw -6 sold (1-5-08)





11. Stock tubes and odd sizes

164. Stock Nelly tube assembly with tube retaining screw and seals -6 sold (10-20-07)
165. Stock Nelly tube assembly with tube retaining screw and seals -6 sold (10-20-07)
166. Stock Nelly tube assembly with tube retaining screw and seals and spring -6
167. Stock Nelly tube assembly with tube retaining screw and seals, light rust -5 sold (2-9-08)
168. Stock nelly tube -4
169. Stock nelly tube -4 sold
170. Stock nelly tube, light rust -3
171. Stock nelly tube -4
172. Stock nelly tube -4
173. Stock nelly tube, light rust -3 gone (9-11-08)
174. Odd lapco size 4 -5
175. ? Free? sold (1-26-08)
176. Misc tube -4
177. Misc tube with fat base -4
178. Misc tube with fat base -4





12. Valve retaining screw

179. Line si valve screw, says si on the side, used -4 sold (10-16-07)
180. Line si valve screw, says si on the top -4 sold (10-16-07)
181. Larger id Line si valve screw, says line si on top -5
182. New lapco valve retaining screw with rounded corners -3 (7x available 13x sold)
183. Used black valve retaining screw -2 (3x available 1x sold)
184. Brightly colored lapco valve retaining screws -3 (2x red available, 1x green available, 1x aqua available, 1x dark blue available, 1x grey available)
185. ACI maverick valve retaining screw, new with large id -2
186. Brass valve retaining screw -5 (3x available)
187. Steel valve retaining screw -2 (4x sold)
188. Used stock nelly valve retaining screw, marked up from wrench, free





13. Nelson based gun velocity adjusters

189. Lapco adjuster 3/8 allen -13 (1x available) (1x sold)
190. Long hex adjuster, steel with light rust 3/8 allen -5 sold (10-6-07)
191. Long hex adjuster, steel, 3/8 allen, no rust -8 sold (10-9-08)
192. Tricar adjuster, aluminum, 3/8 allen -10 (1x available 2x sold)
193. Lapco short 3/8 allen adjuster -4 (3x available 1x sold)





14. Misc Nelson asas

194. Phantom or USI raider asa, anno is stripped and has seen a lot of use -4 sold (10-8-07)
195. Phantom or USI raider asa in decent shape -7 sold (10-7-07)
196. Phantom or USI raider asa in decent shape -7 sold (10-5-07)
197. Nelson asa –keeping this…
198. Nelson 12 gram asa, great shape, nos 25 with seal sold (10-14-07)
199. Nelson 12 gram asa, great shape, nos 25 with seal -sold
200. Nelson 12 gram asa, good shape, light rust - 14 with seal sold (3-19-08)
201. Nelson 12 gram asa, good shape, light corrosion - 16 with seal sold (10-15-07)
202. NW asa, fits a spitfire and probably also an nw comp, excellent shape -6 sold (10-4-07)
203. NW asa, fits a spitfire and probably also an nw comp, excellent shape -6 sold (10-16-07)
204. NW asa, some wrench marks -4 sold (4-5-08)
205. NW faded anno, used -3 sold (4-5-08)
206. Line si, ICD valve body, good shape -12 sold (10-4-07)
207. Line si, ICD valve body, good shape -12 sold (10-20-07)
208. Nelson clone asa -3 sold (1-18-08)
209. Steel asa, nelson to ¼ inch fitting, light rust and needs a polishing -8 sold (9-10-08)





15. Nelson Clone asas

210. Trracer asa in great shape -5 sold (12-2-07)
211. Trracer asa in decent shape -4 sold (4-28-08)
212. Trracer asa in decent shape -3 sold (4-28-08)
213. Trracer asa in decent shape -3 sold (10-11-07)
214. Trracer asa in great shape -5 sold (10-2
215. Trracer asa, used -3 sold (10-20-07)
216. Trracer asa, used -3
217. Trracer asa, decent shape -3
218. Diablo asa with valve retaining screw and powertube assembly -7 sold (10-21-07)
219. Trracer asa, used -3 sold (10-16-07)
220. Trracer asa, in good shape -4
221. Trracer asa, in good shape -4 sold (10-11-07)
222. Diablo asa -3 sold (10-11-07)
223. Diablo asa -3





16. Lapco Nelson asas

224. Nos Lapco nelson asas -15 (4x available 6x sold)
225. Lapco nelson asa, has scratch on the side -8 Sold (10-7-07)
226. Mettalic grey ghost asa, keeping…
227. Matte black nos lapco rear asa -16 sold (10-17-07)
228. Matte black nos lapco rear asa -16
229. Grey ghost asa, keeping…





17. Nelson Spring Kits

230. Taso springs, not sure if new or used , but complete -12 sold
231. Straight Shot Springs, used but complete -8 (2x sold) (10-11-07)
232. Thunder Pig Spring kit, new -15 sold (10-7-07)
233. Thunder Pig Spring kit, new -15 sold (10-9-07)
234. Thunder Pig Spring kit, new -15 sold (10-9-07)
I have more color coded used spring kits for 8





18. Misc Nelson small parts

235. Lapco brass screw set, missing valve body screw -30 sold (10-15-07)
236. Lapco either stainless or nickel plated screws, missing grip frame screw -30 Sold (10-4-07)
237. Nelson clone main screws -3 (8x available 2x sold)
238. Trracer Trracer/maverick thumbscrew -4 (5x sold)
239. Trracer/Maverick ball detent -3 (3x sold)
240. Nelson stock screws -13 (3x sold)
241. Bushmaster plastic screw cap or heads, 4 small and 2 large caps included -4 (2x available 8x sold)
242. Maverick Rebuild kit -3 -sold (10-7-07)
243. Line si pump arm screws, nice shape -25 (3x sold)
244. Nelson ball tube screw, new shape -5 (7x available)





19. Sears and More nelson Small parts

245. Sear with pin and spring -6
246. Sear -4 (6x available) (1x sold)
247. Sear -4 (2x available 1x sold)
248. Sear -4 (8x available)
249. Trracer pump arm screws -5
250. Not for sale
251. Nelson stock trigger-3 (2x available)
252. Skorr Trigger, light rust -6 (2x available 1x sold)
253. Phantom vert asa, stripped threads -4 sold - (10-12-07)
254. Tippman rebuild kit -10 sold (10-8-07)
255. Razorback rebuild kit -10 sold (10-8-07)
256. Diablo screws and valve retaining screw -4 sold (10-21-07)



20. More Misc Nelson Parts

257. Rebline style quick disconnect pump arms, fit most nelsons, nos/new -20 sold (1-26-08)
258. Lapco PCI (Paintball Connection Inc (or international)?) pump arms -6 (3x sold) (10-15-07)
259. Phantom 45 screw in elbow -8 (1x available 1x sold)
260. Phantom Straight screw in df -10 (1x available 1x sold)
261. Bushmaster barrel retaining screw plate -10 (1x available 1x sold)
262. Line si lever for lever changer, great shape -25
263. Carter spring -10 sold (4-5-08)
264. Line si pump arms, used -8 sold (3-19-08)
265. Misc site rail 2 ¾ inch spacing -6
266. AGS devastator site rail -5 sold (3-30-08)
267. Misc pump arm -3 (2x sold)
268. Pump stop caller -4





21.Even More Misc Nelson Parts

269. Pump arm slot covers, new -12 sold (3-29-08)
270. Pierce pin for nelson stock valve -10 –sold
271. Speed wheel, new -14 (2x available 1x sold) used -10 (1x available)
272. Lapco spring retainer or pump arm spacer (goes under lapco pumps on specters and either holds in spring or gets rid of wobble) -3 (10x sold) (1-25-08)
273. Nelson 007 ball cap -15 (1x available 2x sold)
274. Pump stop, new taso-6
275. Lapco cup seal, new -7 (8x sold)
276. Speed wheel with screw -18
277. Pump arm covers -10 with cushions (1x sold) (3-19-08) or used -7 (1x still available)
278. New Line SI pump arms -16 sold (10-16-07)
279. Spitfire linkage for pump arm -4 (2x sold)





22. Nelson Grips and Misc

280. Right Panel stock 007 grip -5 (2x available)
281. Ambi grip for nelson 007 grip -45 sold (10-11-07)
282. Nelson Battle grips in great shape with screws -45 (3x sold) (10-27-07)
283. Stock Nelson Battle grip left side -7 sold (5-12-08)
284. Line si Valve body lever changer in great hsape but 2 marks on valve body from reat set screws in a bushmaster body -80 sold (10-21-07)





Larger pic:
http://www.mcarterbrown.com/gallery/...e-023large.jpg

23. Nelson clone grip frames

285. Spitfire body and frame, no internals and no engraving -6 sold (10-20-07)
286. Diablo frame, no internals -3
287. Spitfire body and frame, no internals -5 sold (4-5-08)
288. Spitfire body and frame, no internals -5 sold (4-5-08)
289. Black rail -2 sold (1-25-08)
290. Ranger rail in excellen shape with 5373 serial number -12 sold (10-16-07)
291. Carter tricar trigger frame, corroded and internals are rusted. Could use a re-anno, grips are in alright shape, no bottom line screw holes -35 sold (10-16-07)
292. Spitfire frame with trigger -6 sold (10-20-07)
293. Taso typhoon trigger frame -10 sold (11-07-07)





Larger pic:
http://www.mcarterbrown.com/gallery/...e-024large.jpg

24. Nelson frames

294. Nelson frame, missing d-ring on 12 gram screw, date is aug-20-1987 -12 sold (10-27-07) (I have more heavily used nelson frames for 7 each, pm me if interested.)
295. Crossman frame from darkside ram -10 pending (1-26-09)
296. Crossman frame from darkside ram -10 sold (12-29-07)
297. Nelson frame, no 12 grame screw with grips in good shape -15 sold (10-27-07)
298. Nelson frame, no grips, has 12 gram screw with ring -13 sold (10-27-07)
299. Nelson frame, no grips, has 12 gram screw with ring -13 sold (10-27-07)





25. Nelson Pumps

300. Phantom/ USI raider pump -8 sold (3-19-08)
301. Phantom/ USI raider pump -8 sold (1-18-08)
302. Spitfire pump, scratched up -5
303. Mini phantom pump -12? sold (11-07-07)
304. Old style nelson long barrel pump -12
305. Old style nelson long barrel pump -12
306. Nelson clone pump -7 sold (3-19-08)
307. Bushmaster or taso pump, grimey -4 sold (10-11-07)
308. Bushmaster pump, missing left side arm, heavy use -10 sold (3-19-08)
309. Bushmaster or taso pump, missing left pump arm -5 sold (3-29-08)





26.Even More nelson pumps

310. Outlaw II pump in decent shape, uses lapco style pump -16 sold (11-07-07)
311. Pointman pump with line si bushmaster arm, used, could use re-anno -25 sold (10-5-07)
312. Lapco old style grey ghost pump, nos -30 -sold
313. Bushmaster pump -15 sold (10-7-07)
314. Tri-car pump, in great shape -30 sold (11-04-07)





Larger pic:
http://www.mcarterbrown.com/gallery/...e-027large.jpg

27. Nelson Bodies

315. Bushmaster, ICD style body, exrental and well use but no engraving -18 sold (3-19-08)
316. Bushmaster, ICD style body, exrental and well use but no engraving -18 sold (3-19-08)
317. Bushmaster, ICD style body, exrental and well use but no engraving but barrel retaining screw is welded on -13 sold (3-29-08)
318. Nelson clone body, breech drop -8 sold (7-19-08)
319. Nelson clone body, breech drop -8 sold (7-19-08)





Larger pic:
http://www.mcarterbrown.com/gallery/...e-028large.jpg

28. More Nelson bodies

320. Nelson Clone body, breech drop -8
321. Razorback, or black widow bore drop, dual pump arms, which takes tracer valve body -9
322. Breech drop clone body -10 sold (1-5-08)
323. Bore drop which takes original bushmaster style valve bodies-8 sold (3-30-08)
324. Black widow body style which is missing the feed and is bore drop. Take dual pump arms -5





Larger pic:
http://www.mcarterbrown.com/gallery/...<br /> <br />

29. More Nelson Clone bodies

325. Breech drop body, missing feed neck color -6
326. Bore drop body, black widow, tracer style -12
327. Bore drop body, black widow, tracer style -10
328. Bore drop body, black widow, tracer style -10 gone (9-11-08)
329. Bore drop body, black widow, tracer style, missing site rail -8





Larger pic:
http://www.mcarterbrown.com/gallery/...e-030large.jpg

30. Misc bodies

330. Bore drop taso body which takes line si style rear asas -10 sold (1-26-08)
331. Bore drop, black widow style -10
332. Breech drop style nelson clone which has removable barrel -10 sold (10-17-07)
333. Nelson 007 body with welded on df -5 sold (4-5-08)
334. Misc tracer style body -3 sold (4-28-08)
335. Chrome hammer body? -4 sold (3-29-08)
336. Trracer body -3 sold (10-20-07)
337. Misc tracer style body -3 sold (4-28-08)





Larger pic:
http://www.mcarterbrown.com/gallery/...e-031large.jpg

31. Lapco Bodies

338. Ghost Body, great shape, some pump wear, 130
339. Ghost body, bore is in good shape but some grime on feedneck and pump arm slot is beat from use -60 sold (1-25-08)
340. Ghost body, new, excellent condition replacement for a ghost with beat up barrel -150





32. Sheridan Plugs and Hammers

341. RVA, wrench marks, could use a little hand polish but works great and has screw -13 sold (11-11-07)
342. RVA, wrench marks, could use a little hand polish but works great and has screw -13 sold (11-11-07)
343. RVA, wrench marks, could use a little hand polish but works great and has screw -13 sold (11-11-07)
344. RVA, wrench marks, could use a little hand polish but works great and has screw -13 sold (9-10-08)
345. Sheridan internal rva (rear internal velocity adjuster) -10 sold (10-7-07)
346. Polsihed rear velocity adjuster, with screw -15 sold (11-04-07)
347. Feed tube plug, good shape -6 sold (11-11-07)
348. Feed tube plug, grimey -4 sold (3-1-08)
349. Feed tube plug, slightly corroded -3
350. Rusty junky hammer -3 sold (11-05-07)
351. Rusty junky hammer -3 sold (11-05-07)
352. Rusty junky hammer -3
353. Rusty junky hammer -3
354. 12 gram plug with Aluminum piece , has wrench marks -4 sold (1-8-08)
355. 12 gram plug with Aluminum piece , good shape, slight rust -6 sold (11-11-07)
356. 12 gram plug with Aluminum piece , good shape, slight rust -6 sold (10-20-07)
357. Correded ball feed front plug-2
358. Ball feed tube front plug, brass sight pin is broken off in the hole but is in good shape -2
359. 12 gram extended plug with aluminum piece -10 sold (10-16-07)
360. Long barrel or Short barrel front plug -6 sold (10-20-07)
361. KP back plug, scratched and needs a polish or repaint -18 sold (10-7-07)
362. KP back plug, has hole for rva but it isn’t tapped -14 sold (10-7-07)





33. Sheridan valve parts

363. Sheridan turbo valve, already open but cupseal still looks good. Includes instructions, valve stem, hammer, springs, and valve -25 sold (10-27-07)
364. Valve stems, most are junk, maybe someone can try rebuilding them -2x for a dollar (2x sold)
365. Cartridge vale, no idea if it works or not. 12 gram seals looks good -20 sold (10-9-07)
366. Cartridge vale, no idea if it works or not. 12 gram seals looks good -20 sold (10-15-07)
367. pg valve -5 sold (10-7-07)
368. Standard Sheridan valve -10 (1x available 3x sold) (12-1-07)
369. Valve retaining screw -6 (1x available 2x sold)
370. Used turbo valve, stem looks like it needs to be replaces. Comes with valve, hammer and stem -15
371. Turbo valve and hammer -12 sold (10-26-08)





34. More Sheridan parts

372. PK-45 with ball stopper -14 2x sold (3-29-08)
373. PK-45, missing ball stopper -8 sold (4-5-08)
374. PK-45, missing ball stopper -8 sold (4-5-08)
375. Sheridan valve tool -15 sold (12-29-07)
376. Sheridan valve tool , with handle-16 sold (10-20-07)
377. KP trigger group, comes with hammer and has safety assembly -75 sold (10-7-07)
378. KP bolt , front is chipped -12 sold (10-7-07)
379. PGP bolt, corroded and set screw into pump rod is stuck -6
380. PG bolt converted to pgp -4
381. P-68 AT kit, still need pump -8 sold (3-10-08)





35. More Sheridan parts

382. PGP pump arm, screw on end is bent -2 gone (9-11-08)
383. PGP pump arm, part that goes into bolt is short -1
384. PGP pump rod, part that goes into bolt is bent -3 sold (10-26-08)
385. PGP pump arm, part that goes into bolt is short -1
386. PGP pump rod, notched for speed demon bolt but will work with regular bolt -7 ( 3x sold)
387. PGP pump rod, notched for regular bolt -7 (2x sold)
388. PGP pump rod, notched for regular bolt, shaft is bent -3
389. Solder on df -15 (3x sold) (3-10-08)
390. Solder on ¾ copper T, cut to fit -1
391. Long Barrel or Short Barrel side line air shaft, brass and used -2 (4x sold) (1-8-08)
392. Long Barrel or Short Barrel Aluminum side line air shaft, beat up -3 sold (1-21-09)
393. Sheridan Trigger -2 (7x available 1x sold)
394. Mag trigger which can be cut to work -2 (1x available 1x sold)
395. Safety, spring and ball -3 (6x available 4x sold)
396. Sheridan Auto trigger, used -15 sold (3-29-08)
397. Sheridan Auto trigger, with 2 color stops -12 sold (10-7-07)
398. Used Sheridan Auto trigger -10 sold (10-20-07)
399. Sheridan Auto trigger in excellent shape -20 sold (10-7-07)
400. Sheridan Auto trigger shaft only -8 sold (1-8-08)





36. Sheridan Grips

401. Black Sheridan panels -6 sold (10-20-07)
402. Black Sheridan panels, right panel is cracked at bottom -3 gone (9-11-08)
403. Black Sheridan panels, right panel is cracked at top -3
404. Crossman logo Sheridan black panels -5 sold (4-5-08)
405. Left side black panel -2 (2x available)
406. Right side wood panel –keeping
407. Brown Right panel in good shape -3
408. Junk- free sold (10-20-07)
409. Nice shape P panels, brown, no cracks -10





37. More Sheridan Grips

410. Excellent shape Sheridan/ PMI wood grips -35 sold (10-27-07)
411. Black painted Sheridan/PMI wood grips -25 sold (11-18-07)
412. Worn Sheridan /PMI wood grips -25 sold (11-07-07)
413. Battle grips with CE lightly carved on the top of each panel -25 - sold (10-7-07)
414. Excellent shape battle grips -35 - (2x sold) (10-17-07)
415. Sheridan frame wood blacks -20





38. Sheridan Grip Frames

416. Cut up frame –free
417. Later pmi long barrel frame, paint stripped -8 (4x available 2x sold)
418. Frmae painted and baked with duracoat like paint, no internals -15 (2x available 2x sold)
419. Junky frame w trigger but no sear -4
420. Frame with trigger, no sear -5
421. Empty frame used frame, need paint job -6 (7x available)





39. Sheridan Air pieces

422. PGP 12 gram dummy asa -15 sold (11-04-07)
423. PGP 12 gram dummy asa -15 sold (12-2-07)
424. PGP 12 gram dummy asa -15 sold (10-27-07)
425. KP or pmi1 asa. Won’t work with kps or others which don’t seal in the lower tube -25 Gone
426. KP3 asa -25 sold (10-5-07)
427. PMI1 12 gram dummy, works with pmi1s with side drop out slots -15 sold (10-11-07)





40. Sheridan Pumps: Some have small pitting spot from not getting buffed all the way out before anno. The are still solid in color though.

428. Sheridan pump for pgp and extension. Extension is not drilled for pump arm hold, only bottom center connecting hole. In deep red -30 sold (11-04-07)
429. Red knurled pgp pump in great shape -30 sold (12-29-07)
430. Pump or extension. Has some pitting -20
431. Pump with some pitting specs -20 sold (11-04-07)
432. Red Knurled pump, in great shape -25 sold (10-7-07)
433. Pump or extension, rough -15
434. PGP pump in good shape with a few small pitting specs.-22 sold (2-3-08)
435. Orange pump in good shape but not polished and scratches under anno are visable -20 sold (1-8-08)
436. Polished pgp pump -23 sold (10-27-07)
437. Knurled stock pgp pump, nice shape but interior is beat up, drilled and tapped on both the drivers side and the passenger side for a pump arm screw -15 sold (12-1-07)
438. Blue pgp pump in good shape but looks like a steel plug or end of pump rod is stuck in the pump rod hole -12 sold (10-7-07)





41. More Sheridan Pumps

439. Black anno ribbed pump in decent shape -20 sold (3-15-08)
440. Black anno ribbed Sheridan pump with some scratches -12 sold (10-27-07)
441. PGP pump, black anno in great shape -25 sold (10-27-07)
442. Ribbed pgp pump in good shape-22 gone (9-11-08)
443. Heavily used ribbed pump-10
444. Great shape black anno pump arm -18 sold (5-3-08)
445. Pump extension, no hole for pump arm -4
446. Decent shape stock ribbed pump -10 sold (3-10-08)
447. PGP ribbed pump in decent shape- 10 sold (12-17-07)
448. Scraped up, heavily used pump, fits a pgp, ribbed -5 sold (10-16-07)
449. Cut down plastic pump, hole is gone for pump arm -1
450. Black anno kp2 pump in good shape but some scrapes -22 sold (6-8-08)
451. Black anno kp2 pump in great shape -25 sold (1-8-08)
452. Stock kp2 pump -16 sold (5-3-08)
453. Plastic pump pump, has crack on pump arm screw hole -1 gone (9-11-08)
454. Heavy duty pgp stock pump with a few nicks and dings-20 sold (6-16-08)
455. Long Sheridan pump cuty to go part way over the trigger guard. Cuts looks alright -14 sold (10-11-07)





Other side pic:

http://www.mcarterbrown.com/gallery/...-sale-042b.jpg



42. Sheridan brass

456. Sheridan pmi body, has cut drop slot, quick strip. It is missing the feed and also has black painton it. No internals or top tube. -35 sold (10-14-07)
457. PGP with copper street 45 as feed, no internals -23 sold (10-31-07)
458. PMI1: has feed and 90 sight rail , feed is soldiered on and has 90 degree side tap. -35 sold (6-8-08)
459. PGP body, has enlarged air hole from valve to bolt. Has hole for screw to retain valve. -20 sold (5-1-08)





43. Sheridan stocks and Tank holders

460. Sheridan wire stock with tank holder. Painted black and has paint is beginning to strip off, -30 Sold (10-5-07)
461. KP3 tank holder, missing siome black paint. Has all screws -35 sold (10-31-07)







44. Cocker Parts

462. Stock valve with stem and spring, might need a new stem -6 sold (11-21-07)
463. Botched valve with stem and spring -15
464. Full stock valve, drilled all the way though, with stem -6
465. stock valve -4
466. Valve with stem, hole doesn’t go through -7 sold (4-5-08)
467. Valve, hole doesn’t go through, stainless, with stem and spring -8 sold (5-1-08)
468. Stock valve -4 sold (6-16-08)
469. Valve, hole doesn’t go through, stainless, with stem-6 sold (11-06-07)
470. Stock valve with stem and spring -10 sold (3-1-08)
471. old stock valve with small hole for lower volume. Would probably work well with 12 grams -15 sold - (10-5-07)
472. Stock valve -3 sold (10-7-07)
473. Aluminum rat valve, with stem -11 sold (10-9-07)
474. Aluminum rat valve, with stem and spring -12 sold (4-20-08)
475. Nice stainless rat style valve with stem -12 sold (1-5-08)
476. Stock valve -4 sold (3-1-08)
477. Rat style valve with one pierce stem -8 pending (9-16-08)







45. Autococker hammers, ivgs and valve retaining screws
478. Cocker hammer with lug, retaining screw hole and with rocking rod retaining screw hole, 536.4 grain -4 (16x available 12x sold)
479. Cocker hammer with lug retaining screw, uses nelson springs, 512.5 grains -4 sold (6-24-08)
480. Stock hammer, uses nelson springs, 608.5 grains -2 sold (10-9-07)
481. Stock hammer, uses nelson springs, 600 grains -2 sold (11-21-07)
482. Stock hammer, uses nelson springs, 605.7 grains -2 sold (1-1-08)
483. Stock hammer, uses nelson springs, 603 grains -2 sold (4-5-08)
484. Stock hammer, uses nelson springs, 614.5 grains -2 sold (4-5-08)
485. Stock hammer, uses nelson springs, 613.5 grains -2 sold (1-18-08)
486. Sheridan spring cocker hammer, 612.4 grains -12 sold (5-1-08)
487. Sheridan spring cocker hammer, 614.7 grains -12 (2x sold) (5-1-08)
488. Sheridan spring IVG -9 sold (5-1-08)
489. Sheridan spring IVG -9
490. Longer Sheridan spring IVG -9
491. Nelson IVG -10 sold (10-16-07)
492. Nelson IVG -8 has a dent in it but doesn’t affect it sold (10-16-07)
493. Valve retaining screw, steel -2 (1x available 5x sold)
494. Valve retaining screw, stainless with oring, -4 sold (12-1-07)
495. Newer cocker IVG, steel -2 sold (11-21-07)
496. Brass Cocker IVG adjuster -2 (5x sold)
497. Hammer Lug -2 (88x available 12x sold)







46. Autococker 3 way rods and cockering arms

498. Old school cocker rod, not threaded, cylindrical, not angled -10 sold (10-20-07)
499. Old school cocker rod, not threaded, cylindrical but angled -10
500. Cocker rod -3 (4x sold) (11-06-07)
501. Hexagonal and rectangular end -3.50 (16x available 4x sold)
502. Brass and steel trigger rod -3 sold (10-11-07)
503. Brass and steel trigger rod -3 sold (10-5-07)
504. Cocking rod with knurled end, new, -3 (7x available 11x sold)
505. Stainless rod with steel back -2 (1x sold)
506. Stock cocking rod -1 (1x available 1x sold)
507. Old school stock cocker rod -2 (3x sold) (10-7-07) (2-3-08)
508. Stock rod -2 sold (11-21-07)





47. Trigger parts

509. Old model trigger, polished -4 sold (4-6-08)
510. Well used old model trigger -1 sold (3-19-08)
511. Old model trigger, polished -3 sold (3-1-08)
512. Newer model trigger -3 sold (10-12-07)
513. Old model trigger, polished -5
514. Dull finish steel sear -5 (3x available 1x sold)
515. Old rusty sear -4 (2x available 1x sold)
516. Polished sear -5
517. Blue, silver, and black 2x trigger shoe -3 All gone
518. Brown, silver, and black 2x trigger shoe -3 all gone
519. Black, red and silver 2x trigger shoe -3 all gone
520. Red, black, and silver 2x trigger shoe -3 all gone
521. Green, silver, and black 2x trigger shoe -3 all gone
522. Grey, black, and silver 2x trigger shoe -3 sold




48. Autococker Pump Rods

523. Plastic coated newer rod for semi -6 sold (12-1-07)
524. Stainless pump rod for semi-3 (3x available)
525. Stainless pump rod for semi-3 (4x available)
526. Stainless with set screw hole for semi -5 sold (2-9-08)
527. Mini cocker pump rod for semi -6 sold (12-15-07)
528. Steel rod for semi -2 pending (9-16-08)
529. pump rod for pump -5 -sold (10-7-07)
530. pump rod for pump -5
531. Old school rod (might be homemade) for semi -2





49. Autococker push pins

532. Pin -3 sold (10-5-07)
533. Pin -3 sold (10-5-07)
534. Push Pin -5 sold (10-11-07)
535. Push Pin, missing retaining bbs -1
536. Push Pin -5 sold (10-28-07)
537. Used push pin with black top -4 sold (11-04-07)
538. Used push pin with black top -4 sold (10-7-07)
539. Push pin with black top -5 sold (10-7-07)
540. Push pin with black top -5 sold (10-20-07)
541. Push pin with black top -5 sold (10-7-07)
542. Pin with pin -4





50. Autococker back blocks

543. Chrome window block -8 sold (10-14-07) (3-29-08)
544. Black window block, new -8 (5x sold)
545. Black slant, good shape -6 (3x sold) (10-9-07)
546. Danny love back block for bolt with notch in bottom, raw and unused -5 sold (10-7-07)
547. Danny love back block for bolt with notch in bottom, raw and unused -5 (2x sold) (10-5-07)
548. Full block -4 sold (1-26-08)
549. Full block, great shape -6 sold (12-15-07)
550. Full block, great shape -5 sold (10-7-07)
551. Full block, scratches -3 sold (10-5-07)
552. Raw, unused full back block -3 (6x sold) (3-1-08)
553. 2k gold block -2 sold (10-7-07)
554. 2k black -2 sold (7-14-08)





51. Front Blocks

555. Pre 2k Raw front block -3
556. Pre 2k shockteck front block , comes with Bomb 3 way and screw but shaft of 3way rod is bent -6 sold (10-14-07)
557. 2k red stock front block -3
558. Stock pre 2k black, used -3 (5x sold) 9-24-08
559. 2k Chrome -5 sold 9-24-08
560. Pre 2k chrome -5 sold 9-24-08
561. 2k front screw, steel -2 sold 9-24-08
562. 2k front screw, black steel -2 (3x sold) 9-24-08
563. Stainless pre 2k screw -3 sold 9-24-08
564. black pre 2k -2 (1x available 3x sold)
565. New ans stainless screw (wowie!) -3 gone





52. Front regs / lprs (all of these are sold as is and I have not messed with them at all)

566. Nickel brass rock red -20 sold (3-19-08)
567. Aluminum rock with knob -15 sold (10-17-07) sold
568. Micro rock, missing barb, chrome is flaking off -10 sold (10-9-07)
569. Stock lpr, missing barb -4 sold (5-1-08)
570. stock lpr -5 sold (5-1-08)
571. partially unscrewed lpr, missing lots! –free sold (7-14-08)
572. partially unscrewed lpr, missing lots! –1 Sold (10-7-07)
573. Stocktech lpr with knob -13 sold
574. Kapp lpr with knob -12 sold (10-8-07)
575. Kapp lpr without knob but with screw-10 sold (10-11-07)





53. 3 ways and parts

576. Generic 3 way -4 sold (10-8-07)
577. Generic 3 way -4 sold (10-11-07)
578. Taso 3 way -5 sold (5-1-08)
579. Brass -4
580. Brass, some scrapes -3 sold (11-06-07)
581. kapp 3 way, missing shaft -1 sold (11-17-08)
582. Bomb 3 way missing shaft -1 sold (12-1-07)
583. Dye 3 way -7 sold (2-3-08)
584. Brass -4 sold (10-7-07)
585. Brass -4 sold (10-7-07)
586. Shaft for brass 3 way -1 sold (10-27-07)
587. Shaft for brass 3 way -1 sold (10-27-07)
588. Shaft for brass 3 way -1 sold (10-27-07)
589. Brass, missing shaft -2





54. Rams

590. Brass ram on pump rod -9
591. Generic ram on pump rod -6 sold (10-11-07)
592. Brass ram on pump rod -9
593. Kapp ram (?) with no barbs -2 sold (10-11-07)
594. ? Free ? sold (12-1-07)
595. Brass ram -5 sold (10-7-07)
596. Brass ram -5 sold (10-27-07)
597. Brass ram -5 sold (10-16-07)
598. Brass ram -5 sold (10-15-07)





55. Beaver tails

599. Well used -1
600. Green os rail, great shape -10 (4x available)
601. Black nice shape -3 sold (10-20-07)
602. Bl;ack and cut for larger frame -2
603. Black, nice shape -2
604. OS black -3 sold (1-26-08)
605. Black, red and silver splash -4 sold (10-7-07)
606. Brown, green and silver splash -4 sold (3-10-08)
607. Purple, black and silver splash -4 sold (10-7-07)
608. Skeleton tail, black, nice but anno cracks or wear at bend
609. Bob long beaver tail, not bent but screwed together -10
610. Beaver tail washer -2 (5x pending)





56. Cocker Frames

611. Polished Eclipse blade in great shape -35 sold (11-11-07)
612. Raw Eclipse blade, not assembled. Includes all the parts - All Sold
613. CCM or works hinge frame in good shape -40 gone
614. Benchmark slider double in chrome -10 sold (10-7-07)
615. WGP swing in pewter, bottom of guard is drilled for screw removable hole -12 sold (2-3-08)





57. More frames

616. Cocker stock frame, pot metal, complete but no grips -6 sold (12-15-07)
617. Plastic, empty -3 sold (3-1-08)
618. Dye, no logo, missing some anno but has all internals but not very smooth at all -10 Sold (10-7-07)
619. Carbon fiber frame -3 sold (3-19-08)
620. WGP slide, complete, plastic trigger shoe -15 sold (10-21-07)
621. Pot metal slider, complet, -10 sold (12-15-07)





58. Shiny frames

622. Raw benchmark frame -10 (2x sold) (10-27-07) (5-8-08)
623. Raw, slightly polished double slider -8 sold (10-12-07)
624. Kapp chrome frame in great shape with internals -15 gone
625. Benchmark slider in chrome, new -15 (2x sold) (11-11-07)
626. Dye frame, used and scratched ect -6 sold (10-12-07)





59. Bolts (Pre 2k and 2k)

627. 2k stock, beat/worn -2 (3x available 4x sold)
628. 2k with some wear -3 sold (11-04-07)
629. Pre 2k stock -4 (3x sold) 9-27-08
630. pre 2k stock in nice shape, milled down -5 sold (3-30-08)
631. Pre 2k stock -2 (2x sold) (3-1-08)
632. Black Aluminum Jam bolt -12 (2x available 8x sold)
633. Raw Aluminum Jam bolt -10 (3x sold)
634. OTP, sling shot -10 sold (3-15-08)
635. Hydra with 3 tips, ventri, foaime and full, seen use -20 sold (10-7-07)
636. Bob long cycle bolt -9
637. 2k ventri bolt with delrin tip -12 gone
638. Cooper t plastic bolt? -8 sold (5-30-08)
639. Old grey plastic bolt in nice shape -10 (5-30-08)
640. Old stock pull/push bolt in great shape -25 sold (5-30-08)
641. Old cooper-t bolt with hole for hammer lug -10 sold (12-15-07)
642. Old cooper-t bolt with no hole for hammer lug -10 (12-15-07)
643. Pre 2k bolt ventri bolt -6 sold (1-26-08)





60. Cocker Shrouds and front blocks

644. Plastic shroud-4 2x sold (10-15-07) (2-3-08)
645. Plastic shroud-3 sold (10-9-07)
646. Black shroud with holes in top, has paint stains on neo prene -10 sold (10-9-07)
647. Pink and blue splash anno’d shroud -20
648. Palmers old front block with rock and nickel 3 way and ram -26 sold (10-16-07)
649. Stock front block for pre 2k -18 -sold (10-7-07)
650. Camo shroud –keeping





Larger pic:
http://www.mcarterbrown.com/gallery/...-sale-061b.jpg

61. Cocker Bodies

651. Lightly dremeled lines on body, no internals with 44k serial -25 sold (12-15-07)
652. 2k FBM body, drilled for eyes on right side. Nickel or chrome asa front block has screw stuck in ram threads and threads look beat on that hole but body looks great except for eye hole -50 sold (11-21-07)
653. 79799 serial -25 sold (10-21-07)
654. 16k serial, comes with vert adapter, grip frame screws are heli coiled -25 sold (10-9-07)
655. Vert asa, nice shape, matte black -10 sold (4-6-08)
656. asa -10 sold (4-20-08)





62. More bodies

657. 2k red cocker body, include front block, body with asa, and back block -26 sold (10-21-07)
658. 16k serial bob long cocker body with back block, asa and milled shroud. Nice cocker but has seen use -42 sold (10-27-07)




63. Misc cocker parts

659. Push pin, well used -3 sold (3-1-08)
660. New banjo fittings -3 (7x available)
661. Sear spring -2 (19x available 1x sold)
662. Main spring -2 (17x available 3x sold)
663. Old school pneumatic line spring cover -2 (3x sold)
664. Top hat cover -2 (10x available)
665. Top hat cover -2 (10x available 6x pending)





64. Automag rear valve regs

666. 32 degrees ventri bolt with foamie -10 (3x available 1x sold)
667. ANS ventri bolt wuith foamie, used -8 sold (10-6-07)
668. stock lvl 7 bolt -3 (12 x available 3x sold)
669. Foamie bolt with foamie -4 (2x available 9x sold)
670. Foamie bolt without foamie -2 (4x available 4x sold)
671. Classic valve back, 1 star CF61752 -6 sold (7-2-08)
672. PMI perfect charger back of valve -12
673. ANS phanse II valve -10 sold (10-14-07)
674. CF02878 valve back, cut for airflow -4 sold (7-14-08)
675. Drilled for increase aire flow -4
676. CIP valve back, z pin has sunk in -8 sold (6-1-08)
677. mag back half -3 sold (10-28-07)
678. minimag back half -3 (3x availavle 1x sold)





65. Mag reg adjusters and locks

679. Os mag tourney lock -15
680. mag set screw tourney locking stainless knurled on edge -5
681. mag set screw tourney locking stainless knurled on edge, smaller than 680 -5
682. Aluminum black touney lock, anno worn -4
683. Stainless lock, with smooth edge, smaller -5 sold (3-31-08)
684. New mag set screw tourney locking stainless knurled on edge -6 sold (10-6-07)
685. Mag reg adjuster screw -5
686. Mag reg adjuster screw -5
687. ANS reg screw, look to work on mags, new -5 sold (10-14-07)





66. Automag sight rauls and other misc

688. Mag site rail, matches plain mag body, aluminum -10
689. Shark site rail, used with set screw -10 sold (10-5-07)
690. Kapp forgrip extender, new, no kapp logo -15 sold (10-11-07)
691. Kapp forgrip extender, new, no kapp logo -15 sold (10-11-07)
692. Kapp forgrip extender, new, no kapp logo -15 sold (1-6-08)
693. Kapp forgrip extender, new, no kapp logo -15 sold (12-29-07)
694. Kapp forgrip extender, red with kapp logo -15 sold (3-18-08)
695. VL foregrip -12 sold (3-18-08)
696. Mag foregrip, was wrapped in duct tape, chrome plated but flacking -5
697. Mag site rail, matches plain mag body, aluminum, used and dinged up -6 sold (1-5-08)
698. Power feed extender -4
699. Side cart -12 -sold (10-4-07)







67. Automag asas

700. AGD rear asa, flat back, great shape -13 sold (10-11-07)
701. New AGD rear asa in round back -12 (1x available 2x sold) (2-2-08)
702. AGD bottom line with round edge, great shape -8 sold (12-1-07)
703. AGD bottom line asa in alright shape, couple of scrapes -4 sold (12-1-07)
704. AGD rear asa, used with flat back -8 sold (10-15-07)
705. AGD rear asa, used with flat back -8 sold (10-16-07)
706. AGD vert air and rear air screw -5 (3x available 1x sold)
707. Chrome AGD vert air, chrome is flaking in small parts -12 sold (2-9-08)
708. Vert air, used, black -12 -keeping
709. Vert air, used, black, has filter but can be taken out -13 -keeping
710. New vert air -15 -keeping
711. Vert air, used, black -10 sold (2x sold 4-6-08)





68. Mag trigger parts

712. Mag 2x trigger, nib, by proline -5 sold (11-24-07)
713. Mag 2k trigger, looks good -3 sold (12-1-07)
714. mag 2x trigger, used and some wear, larger than others sold (3-19-08)
715. Stock carbon frame plastic trigger -3 (6x available 4x sold)
716. Metal trigger, I believe this came from a mag frame -3 sold (10-27-07)
717. Safety for mags -3 (46x available 4x sold)
718. Safety assembly, includes safety spring, safety, bearing and allen screw -6 (1x available 5x sold)





69. Mag valve parts and misc

719. RT parts kit for os rts valves, new -15 sold (3-10-08)
720. Power tube spacer kit with 5 sizes and oring for classic valve powertube, new -8 sold (10-4-07)
721. Power tube spacer kit with 5 sizes and oring for classic valve powertube, new -8 sold (10-5-07)
722. 5 different size powertube spacers and powertube oring so it is exactly the same as the kit -4 (5x sold)
723. Os mag powertube spring -2 (6x available 4x sold)
724. Barrel retaining pin -5 (1x available 4x sold)
725. on/off pin classic valve -3 (9 available 1x sold)
726. on/off assembly, new -10 (4x sold)
727. on/off top – crosshairs style, new -2 (3x available)





70. More mag valve parts

728. Mag reg pin, new -3 (1x available 7x sold)
729. field strip screw -10 (1x available 4x sold)
730. RT banjo bolt -12 (1x available 1x sold)
731. field strip screw with no hole for allen wrench -8 sold
732. reg assembly new -10 sold (3-19-08)
733. powertube tip -3 (1x available 2x sold)
734. rt sear screw -4 sold (10-7-07)
735. Foamie -3 (4x sold) (10-6-07)
736. Classic sear pin -4 (2x available 3x sold)
737. Bench mark frame safety? -1





71. Mag sears

738. Old mag sear -10 sold (12-01-07)
739. Old mag sear -10 sold (3-31-08)
740. Old mag sear -10 sold (4-5-08)
741. Old mag sear -10 sold (4-5-08)
742. Old mag sear -10 gone
743. Old mag sear -10 sold (12-15-07)
744. Old mag sear, polishied to remove multicolor shine -7 gone
745. Old rt sear, no bearing but solid brass piece instead -12 sold (10-7-07)
746. Sear bottom half -4 pending (12-11-08)





72. Mag springs

747. Mag springs, new -2 (13x available 7x sold)
748. Rt springs, used -3 (3x available 4x sold)





73. Mag rails

749. RT pro rail with asa and sight rail, in excellent shape with a couple of small dings -40 sold
750. Standard rail, has bushing for field strip screw, has barrel retaining pin and has been tapped in back for a sling loop and one side is polished -13 sold (10-21-07)
751. Standard rail, has bushing for field strip screw, has barrel retaining pin, good shape -15 sold (10-9-07)
752. Standard rail, good shape but not drilled for vert air and has bushing for field strip screw, has barrel retaining pin -15 sold (10-20-07)
753. Standard rail, good shape but not drilled for vert air and has bushing for field strip screw, has barrel retaining pin -15 sold (10-20-07)
754. Junky polishing job, include bushing -9 sold (10-21-07)
755. Classic rt rail, used with fittings, back has scratches -15 sold (1-12-08)
756. Classic rt rail, used with fittings, new -25 sold (12-15-07)





http://www.mcarterbrown.com/gallery/...-sale-074b.jpg

http://www.mcarterbrown.com/gallery/...-sale-074c.jpg





74. Mag frames

757. Dye chrome plated 2x frame, used with some stains and scrapes but works good -30 sold (10-17-07)
758. Proline auto response frame –sold
759. Benchmark perfect frame in excellent shape with 45 screws and built in drop -40 sold (10-14-07)
760. Benchmark perfect frame with trigger guard cut -5 sold (12-1-07)





75. More mag frames

761. dye single black anno frame, new -18 sold (10-7-07)
762. Benchmark 2x frame, has stripped bottom line screws but has plenty of room for retapping them, and good shape otherwise -18 sold (10-12-07)
763. os metal stock mag frame -14 (2x sold)
764. Old school metal stock mag frame in excellent shape but no safety -16 sold (12-17-07)





76. Even more mag frames

765. Stock mag frame cut for double trigger with double trigger and no safety -12 pending (10-20-08)
766. Stock mag frame with aftermarket trigger -18 sold (3-30-08)
767. Stock mag frame, used -14 (1x available 3x sold)
768. Stock mag frame, new -16 (3x available 4x sold)





77. Mag bodies

769. Polished sanded left powerfeed -10 sold (12-28-07)
770. Black Teflon left powerfeed -25 sold (10-28-07)
771. Pump right powerfeed mag -30
772. Right body mag -16 sold (11-26-07)





Additional pics:

http://www.mcarterbrown.com/gallery/...-sale-078b.jpg

http://www.mcarterbrown.com/gallery/...-sale-078c.jpg

http://www.mcarterbrown.com/gallery/...-sale-078d.jpg

78.More mag bodies

773. Blue ULE mag body with détente in excellent shape with 2 minor scrapes -70 Traded (10-15-07)
774. New polished left powerfeed classic rt body -25 sold (12-1-07)





79. Mag Valves

775. X-valve, works great, has ult and lvl 10 –Keeping this
776. CF 06135, works great -55 Keeping
777. Mix matched front and back both around 40k-60k serials, works great -40 sold (1-18-08)
778. CF 8363 valve, works great, heavily used -50 Keeping
779. CF 1531, used gutted ex rental valve, has something carved on outside but doesn’t affect performance -15 sold (3-19-08)
780. CF 00617, used gutted ex rental valve, has something carved on outside but doesn’t affect performance -21
781. CF 66764 in great shape and work fine -60 sold (11-24-07)





80. Micro Mag body

782. Micromag body with stripped anno and stripped power feed screw -50 Sold (12-15-07)





81. Mag tapes

783. Automag level 7 vhs tape -15 (2x available)
784. RT classic tape -15 sold (10-20-07)





82. Spyder bolts

785. Bob Long cyclone bolt -8
786. Ventri, could be bent -2
787. Cyclone clone -4
788. ?-2 (2x sold)
789. rear cocking? -3
790. Ventri -6
791. Stock covered in gunk -1
792. ?-2 (2x available)
793. Stock bolt in great shape with typical cycling wear -3 (2x available 3x sold)
794. Stock bolt but missing hammer linkage pin -2
795. Stock in dark grey and looks good -4 sold (7-14-08)
796. Bob long cyclone bolt -8





83. Spyder site rails

797. Site rail off a boss raider, fits spyders, used -3
798. priahna site rail -1 (5x available)
799. 2000 model spyder site rail -2
800. older long spyder site -2 sold (4-20-08)
801. 2000 model spyder site rail -2
802. Shorter long spytder site, used -2 (3x available)
803. Used shark rail, good shape -5 sold (10-11-07)





84. Spyder bottom line blocks

804. Spyder bottom line, metal -2 (2x sold) (3-1-08)
805. Spyder bottom line, metal -2 (3x available)
806. Spyder bottom line, plastic -2 (2x available)
807. Wedge plastic -2
808. Spyder bottom line, plastic -2
809. Metal with screw and goes to standard bottomline and might fit a lonestar frame -4
810. Spyer block to standard screws. Would work with 805 and needs to screw in from top -2 sold (10-14-07)





85. Spyder vert asas

811. Spyder vert air with hole in bottom for screw -3 (2x sold) (10-21-07)
812. low pressure chamber screw -1 (2x available)
813. Front vert air, no fitting, same as 816 -2 sold (3-1-08)
814. low pressure chamber -3 sold (1-12-08)
815. low pressure chamber, used -3
816. Very air, same as 813 but with fitting in front chamber -3
817. Front chamber with side screws and low pressure chamber -5 pending (10-23-08)
818. Vert bottle with screw hole on bottom -3
819. Vert bottle with screw holes on side -3
820. Vert something with screw hole on bottom, probably goes with 858 and I will include it for free, could be off a tl -2
821. Pirahna vertical air adapter, screw hole on bottom, has corrosion around edges -1





86.. Spyder Rear plugs

822. Rear Velocity adjuster plug with screw -2 (1x available 2x sold)
823. Rear Velocity adjuster plug with screw -2 (5x available)
824. Rear Velocity adjuster plug with adjuster knob -2 sold (3-29-08)
825. Top tube plug -1 (3x available)
826. Piranha velocity thumb adjuster -2
827. Piranha velocity thumb adjuster, nib -3
828. Rear cocking top plug -2 (1x available 2x sold)
829. Top and bottom plug with velocity adjuster with thumb knob -8
830. Rear velocity adjuster with thumb knob -4





87. Spyder asas

831. Spyder diagonal screw asa -2 sold (10-21-07)
832. Spyder diagonal screw asa -2 sold (11-04-07)
833. Blue Spyder diagonal screw asa -2
834. Chrome plated flaking shroud -1
835. Black shroud in good shape -2 sold (10-14-07)
836. Rear cocking pull pin -2
837. Asa with line -3 sold (10-11-07)
838. Misc piece for 820, free with 820 or 820 is free with this piece -2
839. Rear cocking rod, could be from a cocker -2 sold (3-1-08)
840. Rear cocking rod, is from a cocker -2 sold (3-1-08)
841. Side cocking cover, raw -2 sold (4-20-08)





88. Misc trigger and valve parts

842. Detent cover, short -1 sold (10-8-07)
843. Detent cover, medium –1 (5x available 1x sold)
844. Detent cover, long –1 sold (1-4-08)
845. Piranha trigger -1
846. Bolt stem for optimum diffusion -10,000 or free with something else
847. spring guide, trimmed down -1 sold (10-16-07)
848. Spring guide, nice -1 sold (3-29-08)
849. Double trigger, works great for hittman mod (ask hurt cow) -3
850. 2x trigger for piranha -3
851. Cup seal, star retainer and spring, used -1 sold (4-6-08)
852. cup seal, used -1
853. Trigger part -1
854. Cup seals, used? -1 each (3x available 1x sold)
855. Sear, -2
856. Sear, -2 sold (1-4-08)
857. Sear, -2 (2x sold) (3-29-08)
858. Sear, stainless -3 sold (10-15-07)
859. Spyder trigger -2 sold (11-04-07)
860. Spyder trigger, has back tapped for set screw which I think might mess it up -1





89. Spyder hammers and valves

861. Old style spyder hammer -3 sold (7-14-08)
862. Old style spyder hammer -3 pendiong (4-20-08)
863. Old style spyder hammer -3 sold (12-1-07)
864. Old style spyder hammer -3 sold (12-1-07)
865. New style spyder hammer (smaller in diameter) -3
866. Rubber stopper, new style -1 sold (3-29-08)
867. Rubber stopper, old style -1 sold (3-29-08)
868. Spyder valve -4 sold (7-14-08)
869. Spyder valve -4 sold (7-14-08)
870. Spyder valve -4
871. Rubber stopper, old style -1 sold (3-29-08)
872. Stock spyder valve -2
873. Bob long valve -6 sold (10-7-07)
874. Spyder valve -4 sold (4-20-08)
875. Stock spyder valve -2 sold (4-20-08)





90. Junk frames

876. Plastic spyder frame -1
877. Plastic spyder frame, with cut trigger guard -free sold (2-3-08)
878. Plastic spyder frame -1
879. Plastic spyder frame -1 sold (2-3-08)







91. More spyder frames

880. Stock plastic spyder frame, front broken, has pins, trigger, spring, and safety -1 sold (10-11-07)
881. Hump frame, taso, has some pins and is used -15 sold (10-11-07) (I have another new one for 20 - sold (11-04-07))
882. Stock metal spyder frame, but missing nuts for bottom line in grip -10 sold (1-12-08)
883. Dye frame, complete but don’t know if it works, obviously cut for 2x trigger, and flaking -5 sold (4-20-08)
884. Brusier outlaw frame, works and complete -20 sold (10-14-07)
885. Bob long frame, empty with just trigger -12 sold (10-16-07)





92. Spyder bodies

886. Spyder body, takes bottom vert air screw and newer lower internals -8 sold (2-8-08)
887. Spyder body, takes bottom vert air screw and newer lower internals -8 sold (2-8-08)
888. Spyder body, takes bottom vert air screw and older lower internals -8
889. Bruzier outlaw body, includes va, detent, valve, and cupseal, takes older lower tube internals -14
890. Bob long millennium body, back body screw looks like it might be stripped, takes older lower tube internals -13 sold (10-5-07)
891. older style spyder body in black, includes valve, and detent -10





93. Misc blowback and clones bolts

892. F1 bolt? 4.32 inches, good shape -4 sold (2-2-08)
893. F1 bolt? 4.32 inches, good shape -4 sold (2-2-08)
894. F1 bolt? 4.32 inches, dirty -2
895. Don’t know, 4.287, delrin/plastic -2
896. Don’t know, 5.66 inches -3
897. Don’t know, 4.333 inches and fits inside illustrator body -3 sold (2-2-08)
898. Looks like a rebel bolt -2
899. Possibly a rebel bolt, not rear cocking -1
900. Griffin ventri bolt, might work in f4 illustrator -4 sold (11-18-07)





94. Misc Blowback parts

901. Sentinel parts, back plug threads looks beat -10
902. Combat / Master / Storm bolt and hammer, don’t know which this is for, hammer od is .746 abd bolt od is.738, used -8
903. Combat / Master / Storm bolt and hammer, don’t know which this is for, hammer od is .746 abd bolt od is.738, new -12 (3x available)
904. Misc hammer -2
905. Misc hammer -2
906. F1/F2 hammer, used -1 sold (2-2-08)
907. F1/F2 hammer, used -3 sold (2-2-08)
908. F1/F2 hammer, used -3 sold (2-2-08)
909. F4 top plug -2 sold (11-17-08)
910. Beat f4 top plug -1 sold (11-17-08)
911. F4 ? Spring with cap -2 sold (10-7-07)
912. F4 ? Spring no cap -2 sold (10-7-07)
913. Griffen front lpc plug (might work with f4?) -2
914. Griffen back plug -1 gone (9-11-08)





95. Misc Blowback frames

915. Sentinel frame, great shape with trigger spring -20 sold (10-17-07)
916. Piranha frame, plastic -4 sold (10-15-07)
917. Piranha frame, plastic -4 sold (10-15-07)
918. Griffin/ f4 frame, complete -4 sold (6-16-08)
919. Griffin/ f4 frame, complete -4 sold (6-16-08)
920. Griffin/ f4 frame, complete -4 sold (6-16-08)
921. Pt extreme frame, complete -5 sold (10-9-07)

922. F4/ aft frame, with front screw, complete -10 sold (10-7-07)
923. Pt frame, complete -5 sold (10-21-07)





96. Stack Tube Blowback bodies

924. PT body with most internals -10 pending (1-21-09)
925. Patriot 1 body with valve -6
926. F2 body, empty -6 sold (10-20-07)
927. Griffin body, empty -5 sold (11-18-07)
928. Sentinel body, empty -15 sold (11-11-07)





97. Tippman plastic pieces

929. Prolight/ Procarbine plastic sight -2 (4x available)
930. 98 trigger -1 sold (10-7-07)
931. 98 sight -1
932. 98 adjustable sight -2 sold (10-16-07)
933. Prolight asa -2
934. Prolight asa -2
935. 98 trigger guard -1 (2x sold)
936. 98 foregrip -1 sold (10-7-07)
937. 98 feed, screw in clamp broke, -1
938. 98 feed in excellent shape -4 sold (10-7-07)
939. Rights side prolight frame -1
940. sl or 68 special metal hopper adapter-8 sold (10-8-07)
941. sl or 68 special plastic hopper adapter-4 sold (10-15-07)
942. Tippman stock squeegee -3 (4x sold)





98. Tippman valve parts

943. Tippman 98 powertube, coule be procarbine, I don’t really know -2 (1x available 2x sold)
944. 98 bolt in great shape -2 sold (10-16-07)
945. 98 bolt in used with some scratches -1
946. 68 special bolt, new -2 (5x sold)
947. 68 special bolt, used -1 sold (10-11-07)
948. Aftermarket 98 bolt -3
949. Procarbine powertube tip? -2 sold (3-18-08)
950. Procarbine / prolite bolt, used -2 sold (12-15-07)
951. Procarbine / prolite bolt, 2 linkage holes, ones has a chip -1
952. 68 special powertube tip -3 sold (10-11-07)
953. Prolite powertube tip -3 sold (3-18-08)
954. Prolite powertube tip -3 sold (3-18-08)





99.Tippman Asa parts

955. Prolite / carbine linkage arm -2
956. 98 end cap -1
957. Prolite end cap -1
958. Prolite hammer? Od= .835 -2
959. 98 hammer od= .99 -3
960. Prolite air hose -2
961. Procarbine hammer length= 2.55 od=.835 -3
962. Prolite hammer? Od= .835 -2 gone (9-11-08)
963. 68 special valve, looks good -5 sold (10-11-07)
964. 68 special valve, looks good -5 sold (10-15-07)
965. 98 rear cocking, looks new -4 sold (10-16-07)
966. 68 special linkage arm -2 (4x sold) (10-15-07)
967. some kind of valve -1





100. Tippman small parts

968. Brass tippman vert adapter -12 sold (10-27-07)
969. Tippman cocking pin -2 (5x available)
970. 98 hopper retaining teeth -2 sold (10-17-07)
971. 98 velocity screw -2 (3x available)
972. Tippman 98 ball detent set, looks good but dirty -2 (3x available 1x sold)
973. sl-682 cup seals -2 (5x sold)
974. 68 special lock pins -2 (2x available)
975. 68 special plungers, some look good, others look used? -2 (5x sold) (11-04-07)
976. Some kind of 68 special line, almost looks like a siphon tube -2 (4x sold)
977. 68 special main spring -2 (2x sold) (11-04-07)





101. Angel and other electro parts

978. Andel sping, looks like a nelson spring but smaller, came with some angel parts –free
979. Angel switch -1
980. Angel trigger -2 sold (10-20-07)
981. Angel bolt, ventri -3
982. Angel battery, looks to still work, tested it and it still had voltage –20?
983. Single dye black frame, new -8 sold (10-7-07)
984. Single dye chrome frame, new -8 sold (2-2-08)
985. NDZ impulse rip valve -4
986. Evil ventri for impulse -4 sold (6-22-08)
987. old dye stickies for angel frame, good shape -4
988. Angel volume chamber plug -1 sold (2-2-08)
989. Looks like excel or Viking trigger -10 sold (10-5-07)
990. Excal or Viking lpr, came with scm lpr instructions but I don’t know -10 sold (10-20-07)
991. Excal Viking plug -4 sold (4-20-08)





102. Feed necks

992. Viking or excel feedneck, used good shape -6
993. Viking or excel feedneck, used decent -5
994. Threaded on the inside evil smoke stack with orings -4 (2x available)
995. Kapp, cocker threaded feedneck, 36 thread -4
996. Black angel -2 sold (2-2-08)
997. Raw angel -2 sold (2-2-08)
998. Akalmp angel -5 sold (2-2-08)
999. Angel -3 sold (2-2-08)
1000. Screw tight angel with extension -4 sold (2-2-08)
1001. Blue kapp for angel, used -2 sold (10-8-07)





103. Misc BE parts

1002. Stingray rebuild kit -5 sold (10-7-07)
1003. Stingray rebuild kit -5 sold (3-19-08)
1004. Stingray back asa –free (4x sold) (12-29-07)
1005. BE valve adjustable hammer -22
1006. Talon 12 gram plug -1
1007. Raptor detent cover -1
1008. BE valve adjustable hammer -22 Sold (7-31-08)
1009. BE nightmare valve -30 sold (4-20-08)
1010. BE valve stem for old valve -5
1011. BE valve stem for old valve -5





104. Montneel and clone parts (see parts 1528-1531 for siphon tubes)

1012. Z summer valve, complete, used -30
1013. Valve body, probably from clone Z -5
1014. Complete clone valve -12
1015. Winter valve complete, missing velocity screw and spring -15
1016. Black plastic Z bolt -10
1017. raw Z bolt -6
1018. Bolt linkage -3 (2x available) with spring -4 (2x available)
1019. Mainspring -2 (6x available)
1020. Lock pin -2 (9x available)
1021. Monteel valve rebuild kit -15 (2x available)
1022. détente ball? -1 (10x available)
1023. Valve spring -1 (2x available)
1024. Valve end -1 (10x available)





105. Sterling parts

1025. Diamond labs light blue sterling bolt, has chocker allen adjustable spring and pin to prevent adjustable spring from falling out -25 sold (10-12-07)
1026. Diamond labs light red sterling bolt, has chocker allen adjustable spring and pin to prevent adjustable spring from falling out -25 sold (2-3-08)
1027. Diamond labs raw sterling bolt, missing chocker allen adjustable spring and pin to prevent adjustable spring from falling out -10 sold (3-29-08)
1028. Raw sterling bolt -10 sold (3-1-08)
1029. Screw set -12 sold (2-3-08)
1030. Screw set -12
1031. Screw set -12





106. VM parts

1032. VM cooper t back bottle asa -15 sold (5-13-08)
1033. VM back bottle asa set up, with front plug and back bottle -15 sold (10-15-07)
1034. VM valve tool -10 sold (10-27-07)
1035. VM valve tool, threaded portion looks shorter, possibly end ground down but still should work fine -9
1036. VM valve tool -10 sold (10-15-07)
1037. VM valve tool -10 sold (12-1-07)
1038. VM bolt with allen chocker -12 sold (12-29-07)
1039. VM ventri with chocker -20 sold (4-5-08)
1040. Phase 2 vm bolt with chocker -20 sold (3-19-08)





Additional pics:

http://www.mcarterbrown.com/gallery/...sale-0107b.jpg

107. Sovereign

1041. Sovereign 1 project gun. Include all specific parts but will need another barb on the 3 way and a lpr. Brass ram bolt collar sleeve is showing wear also and I would recommend picking up a sov 2 or 3 sleeve from the new Arrow Precision parts distributer-150 sold





108. Misc parts, NSG and ICD

1042. Rapid double action arm with sping on bolt and oring, I think this is for a rapid at least -12
1043. Rapid double action arm -6 (5x available)
1044. I think this is a replacement rear velocity screw for a desert fox and it fits the fox bit I’m not totally sure, green, it also reduces to mag threads so you can use a mag tourney lock, made by KAPP -6
1045. I think this is a replacement rear velocity screw for a desert fox and it fits the fox bit I’m not totally sure, red, it also reduces to mag threads so you can use a mag tourney lock, made by KAPP -6
1046. Kapp Mag or above desert fox tourney lock, red -4
1047. Push pin for spyder or be gun? -3 (3x available)
1048. Rapide clip adapter in black with screws -2
1049. Rapide clip adapter in green with screws -2 sold (11-11-07)
1050. Rapide clip adapter in black with screws -2 (5x available)
1051. Splatmaster 12 gram screw plug -5 sold (10-4-07)





109. Trigger shoes and extra

1052. Piranha 2x trigger -1 (1x available 2x sold)
1053. Plastic trigger shoe, but screw holes are cracked- free sold (1-8-07)
1054. Spyder trigger shoe -2 sold (12-17-07)
1055. cracked –free sold (10-7-07)
1056. cracked –free sold (10-21-07)
1057. spyder or piranha trigger -1 sold (11-04-07)
1058. Spyder 2x shoe, no screws -1 sold (10-7-07)
1059. extra wide 2x shoe -2
1060. brass trigger shoe with allen wrench and screws -10 sold (11-04-07)





110. Trigger

1061. Red trigger guard -2 (7x available)
1062. Black trigger guard -2 (10x available 1x sold)
1063. Clear / raw trigger guard -2 (9x available)
1064. Blue trigger guard -2 (4x available)
1065. Green trigger guard -2 (8x available)
1066. Black trigger guard -3 sold (5-19-08)
1067. Black trigger guard -3





111. 45 panels

1068. Black plastic panels -3 for a set or if you buy two or more sets -2 (8x available 2x sold)
1069. APP panels, used -3 sold (4-20-08)
1070. Brown panels -3 (1x available 1x sold)
1071. Wood panels with brass washer -6 -sold (10-6-07)
1072. Faux ivory panels, couple of dings but overall nice shape -15 sold (1-25-08)
1073. PMI grips from piranha frame -1 for a set or 3 sets for 2 dollars (10x available)
1074. Carved up panels -1





112. 45 wrap around grips

1075. Dye stickies, clear and clean -10 sold (4-6-08)
1076. Dye stickies, all black stickies -7 Sold (10-5-07)
1077. Dye stickies, Orange with black dye logo -6
1078. Dye stickies, black with gold dye logo -7 Sold (10-5-07)
1079. Dye stickies, red with gold dye logo -6 sold (10-20-07)
1080. Generic wraparounds -4 sold (10-12-07)
1081. Spyder wrap arounds -3
1082. App wraparounds -4
1083. Smart Parts stickies -3
1084. Smart Parts cut 45 wraparounds
1085. WGP wraparounds, no jewel -2 sold (10-11-07)





113. More 45 wraparounds

1086. Houge wraparounds, used decent couple of paint stains -10 (1x sold) (3-1-08)
1087. Taso Houge wraparounds -12 sold (10-28-07)
1088. Nice shpe houge grips -12 sold (10-28-07)
1089. SP wood wrap grips in nice shape with 2 small scratches -22 sold (10-12-07)
1090. Houge wraparounds with tear on right side bottom screw -3
1091. SP wood 45 wraps with small chip on inside pin, still work fine -20 sold (10-9-07)





114. Cocker and mag plastic grips

1092. Cocker plastic, cut on bottom -1
1093. Cocker plastic cut and cracked on right panel -1
1094. used panels -2 (3x available) (2x sold)
1095. excellent shape panels -4 (4x available 1x sold)





115. nice cocker and mag grips

1096. SP wood green grips with one small gins in great shape though -18 sold (3-1-08)
1097. AGD rubber grips -12
1098. Automag wood grips, will also fit cocker frames, in great shape -22 sold (2-9-08)
1099. Automag wood grips, will also fit cocker frames, in great shape -22 sold (6-15-08)
1100. Lapco W-1 grips used, hard plastic -20





116. Lonestar / m-16 style grips

1101. Generic grip, missing bottom -3 gone (9-11-08)
1102. Spyder grip with bottom -4 gone (9-11-08)
1103. Lone star, well used and dirty but still functions fine -6 gone (9-11-08)
1104. Lonestar decent shape -10
1105. Lonestar dirty -7 sold (10-17-07)
1106. Lapco style grip, back bottom corner carved slightly but look nice -7
1107. Lapco style grip -10
1108. Taso grip with sling mount and screw -13 gone (9-11-08)





117. Foregrips and grip asas

1109. T handle fore grip, tightens on washer which touches barrel so it doesn’t scratch barrel. Will work on 1 inch barrels -12
1110. Scott T handle fore grip, tightens on washer which touches barrel so it doesn’t scratch, id= 1.35 -12
1111. Lone star style foregrip, id= .85 -13 sold (10-15-07)
1112. Lonestar grip clock -15
1113. Euro grip asa -6 sold (2-3-08)
1114. Lonestar grip bottom -1 (5x available)





118. Sights

1115. Daisy sight, nice shape -8 sold (3-1-08)
1116. Daisy sight, back par that tightens on rail is chipped -6
1117. Daisy sight front part that tightens on the rail is chipped -6
1118. Daisy sight, rail is cracked at both back and front -3
1119. Daisy sight, rail is cracked at both back and front -3
1120. Battery is dead, adco hotshot -8 sold (10-20-07)
1121. Works but no batter -8, red dot sold (10-20-07)
1122. BSA works but battery is dead or gone -12 sold (11-04-07)
1123. BSA works but battery is dead or gone -17 sold (10-31-07)





119. More sights

1124. Tasco 4x15 scope, decent screws are corroded -12 sold (10-31-07)
1125. Slide on site rail, id= 98 for a vm, new -7 sold (11-04-07)
1126. Slide on site rail, id= 98 for a vm, new -7
1127. Slide on site rail, id= 98 for a vm, new -7
1128. Taso devastator sight rail -3 (1x available) (1x sold)
1129. Thick sight rail that slides over smaller rail, new -6
1130. AGD sharpshooter, long, used and no text left on top -35
1131. Nelson sight rail -6
1132. Sheridan sight rail, new, no holes -6
1133. Aluminum ghost sight made from what looks like a spyder barrel or body, looks good -4
1134. Front sight, used -10 sold (11-11-07)
1135. Weaver 1 inch clamp -5
1136. PPS powercoated ghost sight -18 sold (10-27-07)





120. Muzzle brakes

1137. 1 inch, used -2 sold (10-11-07)
1138. 1 inch, new taso -6 sold (11-11-07)
1139. 1 inch, new taso -6 sold (3-12-08)
1140. .87 in great shape -5 sold (12-27-07)
1141. .87 with a couple of dings -4 sold (3-29-08)
1142. .80 not for sale
1143. 1 inch, used -3 sold (10-11-07)
1144. 1 inch in great shape -5 sold (10-15-07)





121. Gas thoughs and expansion chambers

1145. Gas though, looks new, input is on the bottom -5 sold (4-20-08)
1146. Gas though, nice shape, input is on the bottom-4 sold (10-7-07)
1147. Smart Parts gas through in nice shape with side input -5 sold (11-11-07)
1148. ACI gas through, used with bottom input sold (3-19-08)
1149. Stackable gas through in nice shape with side input -7 sold (10-28-07)
1150. Stackable gas through slight use with side input -9 sold (10-28-07)
1151. Raw gas though, with input on side -3 sold (11-04-07)
1152. Gas though with bottom input -6 sold (10-9-07)
1153. Benchmark / Olympic paintball expansion chamber, used and wrench marks -6 sold (10-21-07)
1154. Benchmark expansion chamber, used and wrench marks -6 sold (10-20-07)
1155. Misc expansion chamber, generic -3 sold (3-19-08)
1156. JTD in excellent shape, looks like pre runner to classic air America expansion chamber -20 sold (10-7-07)
1157. Generic expansion chamber, take smaller hose size, probably from a spyder, in excellent shape -2 sold (10-21-07)





122. Regulators

1158. AA stainless unireg with tourney lock -30 sold (7-22-08)
1159. AA black ice Aluminum unireg with tourney lock -20 sold (10-7-07)
1160. AA vigilante, I think it needs a rebuild -10 sold (10-16-07)
1161. AA messia, used with some wrench marks -15 sold (10-16-07)
1162. ANS genx2 reg, reg -15 sold (10-17-07)
1163. Sidewinder, good shape but two tiny dings -25 sold (10-05-07)
1164. PMI PE reg -12 sold (10-27-07)
1165. PMI PE reg -12 sold (10-9-07)
1166. BL reg, new -20 sold (11-20-07)
1167. old bl reg, needs a rebuild -4 sold (10-21-07)
1168. WGP reg, used -5 sold (10-20-07)
1169. WGP reg, used -7 sold (10-7-07)
1170. used WGp reg -7 sold (10-7-07)
1171. used WGP reg -8 sold (10-9-07)
1172. used WGP reg -10 sold (10-7-07)
1173. standge reg which came off a bruzier but takes a smaller hose. The regs looks like an ICD desert rog reg knockoff -6
1174. WDP reg with 90 fitting -5 sold (10-8-07)





123. 12 gram changers

1175. Drop out changer -20 sold (10-7-07)
1176. Drop out changer -20 sold (11-07-07)
1177. cci black changer, some light wrench marks arounds the top -13 -sold (10-5-07)
1178. cci black changer in good shape -13 (2x sold) (10-7-07)
1179. Rat Attack style 12 gram changer, not sure if these are TASO, AGS or even Carter (probably AGS (though which I think actually became taso?).). Decent shape but some have some dings and all can probably use new 12 gram seals -30 (5x available 5x sold)
1180. BE changer -5 sold (10-7-07)
1181. BE changer -5 sold (10-7-07)
1182. Generic bucket changer -8 sold (10-12-07)
1183. Generic bucket changer -8 (2x sold) (10-27-07)
1184. Drop out changer in good shape -21 sold (10-7-07)
1185. Drop out changer in good shape -21 sold (10-7-07)
1186. Old used drop out, which chip on end of threads, should still work fine -8 sold (1-5-08)




124. ASAs

1187. 2 side hole input -4
1188. 1 side hole input-3 sold (2-3-08)
1189. Nice 2 sided input smooth in good shape -7 sold (11-04-07)
1190. Nice 2 sided input smooth in decent shape -6 sold (10-11-07)
1191. Asa input air hole in front -4 sold (10-15-07)
1192. Asa input air hole in front, in great shape -6 sold (10-17-07)
1193. Weird asa 2 side inputs -4
1194. Good shape input air hole in front -5 sold (10-9-07)
1195. Good shape -5
1196. AM asa input air hole in front -6 sold (9-8-08)
1197. AM asa input air hole in front -6
1198. Wrench marks, 1 air input -3 sold (10-5-07)
1199. Good shape -5 sold (2-2-08)
1200. Lines milled in big asa -5
1201. Discolored with 1 air input -3 sold (10-27-07)
1202. Beat up aci asa, one side input -1 sold (10-27-07)
1203. ACI asa in good shape, one side input -4 sold (10-20-07)
1204. Small wrench marks, 1 side input -3 sold (2-2-08)
1205. Great shape with 2 air inputs -7 sold (10-7-07)
1206. Wrench marks and discoloration, 1 input -2 sold (10-16-07)
1207. Beat up 1 side input and has some wrench marks -3 sold (11-04-07)





125. Misc air pieces

1208. Slide check, not tested but probably leaking -1 sold (10-5-07)
1209. Slide check, not tested but probably leaking -1 sold (10-5-07)
1210. Ball valve -15
1211. Slide check, not tested but probably leaking -1 sold (10-5-07)
1212. Old shocker quick disconnect -17
1213. 12 gram dummy -4 sold (10-5-07)
1214. 12 gram dummy -4 sold (10-5-07)
1215. Pressured tester fitting, could test regs? Gas a screw down valve -10
1216. Dark olive 2 sided asa, new -6 - sold (10-6-07)
1217. Chrome, plating is flaking near input hole but good shape overall -9 sold (10-17-07)
1218. Cobalt blue asa in great shape with 2x air inputs -3 sold (10-27-07)
1219. Purple asa with bottom input and couple of small dings -3 sold (11-04-07)
1220. Light cerulean blue with 2x inputs in great shape -3 sold (10-17-07)





126. hose to quick disconnects

1221. Raw 1/8 npt to asa, new-5 (9x available 11x sold)
1222. Stainless Steel 1/8 npt to asa, no depressor pin -12 sold (4-20-08)
1223. Stainless 1/8 npt to asa, nice -14
1224. Beat aluminum 1/8 npt to asa, 4 sold (10-21-07)
1225. Stainless Steel 1/8 npt to asa, nice -13 sold (10-5-07)
1226. Quick disconnect, works fine -5 sold (10-9-07)
1227. Quick disconnect, works fine -5 sold (10-5-07)
1228. Quick disconnect, works fine -5 sold (10-15-07)
1229. Quick disconnect, works fine -5 sold (10-15-07)
1230. Quick disconnect, works fine -5 sold (10-16-07)





127. Thermo Fittings

1231. Thermo Adapter aluminum 1/8 npt connection -3 sold (1-10-08)
1232. Missing centerpiece -1
1233. Long nipple, steel -3
1234. Long brass one piece nipple -2
1235. Brass and brass -4
1236. Brass 90 on thermo adapter -5
1237. Brass 90 on thermo adapter -5
1238. Brass and brass with some wench marks -3
1239. Beat up Brass and brass with some wench marks -3





128. Remote on / off asas, caps, and plugs

1240. Proline remote on/off asa in great shape -8 sold (10-17-07)
1241. Benchmark in good shape, on/off -6 sold (10-21-07)
1242. Generic on/off, used -3 Sold (10-7-07)
1243. Generic on/off with plastic cap -3 Sold (10-7-07)
1244. Smart Parts inline on off in great condition -13 sold (10-11-07)
1245. Cooper T side tapped inline -6 sold (10-15-07)
1246. Generic on/off in good shape -6 Sold (10-7-07)
1247. WGP remote asa, from 1/8 npt to asa , looks new -10 sold (10-31-07)
1248. WGP remote asa, from 1/8 npt to asa , looks new -10 sold (10-17-07)
1249. WGP remote asa, from 1/8 npt to asa , looks new -10 sold (10-7-07)
1250. WGP remote asa, from 1/8 npt to asa , used-4 sold (3-1-08)
1251. Remote asa -6
1252. Remote asa, from 1/8 npt to asa , looks new with nipple-6
1253. Bottle cap, yellow -2 sold (10-5-07)
1254. Bottle cap, green -2 sold (10-5-07)
1255. Bottle cap, red -2 sold (10-5-07)
1256. Bottle cap, red -2 sold (10-5-07)
1257. Bottle cap, light green -2 sold (10-5-07)
1258. ASA plug -4 sold (10-7-07)
1259. ASA plug -4 sold (10-5-07)





129. Asa to hose plugs

1260. ASA to ¼ npt with some wrench marks with macro fitting -5
1261. Used asa to 1/8 npt -3 sold (10-8-07)
1262. ASA to ¼ npt with 90 degree fitting-4 sold (10-7-07)
1263. ASA to ¼ npt with 45 degree fitting-3 sold (10-7-07)
1264. Lapco style ASA to ¼ npt, with hex end -5 sold (10-5-07)
1265. Hex end, good shape -5 sold (10-5-07)
1266. Hex end, good shape -5 sold (10-5-07)
1267. ASA to 1/8 npt with some wrench marks with macro fitting -5
1268. Blue painted Lapco style ASA to 1/8 npt, with hex end -3 sold (10-27-07)
1269. Good shape with 2 flat sides asa to 1/8 npt -5 sold (10-7-07)
1270. Looks good -4 sold (10-7-07)
1271. Action markers asa to 1/8 npt with light wrench marks -3 sold (10-8-07)
1272. Action markers asa to 1/8 npt in good shape-3 sold (10-8-07)
1273. ASA to 1/8 Male quick disconnect -5 sold (10-8-07) (10-11-07)
1274. ASA to 1/8 Male quick disconnect indecent shape -4 sold (10-8-07) (10-11-07)
1275. ASA to 1/8 with 90 degree fitting, used -3 sold (10-8-07)
1276. ASA to 1/8 raw -2 sold (10-8-07)
1277. Looks good -4 sold (10-8-07)
1278. Brass ASA to 1/8 -6
1279. Hex head ASA to 1/8 in good shape -4 sold (3-29-08)





130. Gauges

1280. Ashcroft 1200 psi gauge -6 sold (10-11-07)
1281. Ashcroft 1200 psi gauge -6 sold (10-15-07)
1282. Ashcroft 700 psi gauge -6 sold (12-1-07)
1283. Air America 5000 psi gauge -6 sold (10-14-07)
1284. Generic 1500 psi gauge -5 sold (10-14-07)
1285. Cracked plastic nitro duck 5000 psi gauge -3 sold (10-8-07)
1286. Nitro Duck 1200 psi gauge -6 sold (11-11-07)
1287. Nitro Duck 6000 psi gauge -6 sold (10-15-07)
1288. Nitro Duck 5K gauge -5 (5x sold) (10-15-07)
1289. Nitro Duck 5K gauge -5 sold (10-15-07)
1290. Dye 5K gauge with some small wrench marks -4 sold (10-7-07)
1291. Smart Parts 1200 PSI gauge -4 sold (10-7-07)
1292. Crossfire 4000 psi gauge -4 sold (10-8-07)
1293. Generic 1500 PSI gauge -4 sold (10-20-07)
1294. ACI 1500 PSI Gauge -4 sold (10-14-07)







131. CO2 tank valves and junk… (all are sold as is and should only be installed by certified individuals) I didn't test any of these and based my price on their appearance and some on whether they would hold air when I blow through them. Some will probably need burst discs.

1295. New valve, needs to be assembled -4 sold (10-7-07)
1296. Not sure what kind of valve this is -2
1297. Leaks -2
1298. on/off knob -3
1299. on/off knob, black -3 (4x available 1x sold)
1300. Good valve -4 sold (10-16-07)
1301. On/off valve -5 sold (10-15-07)
1302. Co2, holds -4 sold (12-01-07)
1303. Leaks -2 (15x available)
1304. on/off knob -3
1305. Co2 valve -4
1306. Co2 valve -4 sold (10-17-07)
1307. co2 Valve -4
1308. Co2 Valve -4 sold (10-16-07)
1309. t-handle on off -2





132. Long Air hoses

1310. 4 foot black hose rated to 2500 psi -5 sold (10-15-07)
1311. 4 foot with male and feemal connections -12
1312. 4 foot steel braided -7 (1x available 1x sold)
1313. 3.5 foot black hose -5
1314. 3.5 foot steel braided hose -6
1315. 21 inch Steel braided hose -5





133. Coiled Remote Hoses

1316. Black coiled hose with on/off and male and female qds, in great shape -15 sold (10-7-07)
1317. Thin black coiled remote hose -7 sold (10-27-07)
1318. Old schocker sp remote, one end is larger fitting than the other -7 sold (10-4-07)





134. Small Air Hoses

1319. 16 inch black hose -4 -Sold
1320. 1 foot black hose -4 (3 sold)
1321. 1 foot steel braided -5 (2x available 2x sold)
1322. 9 inch steel braided -5 (2x available 3x sold)
1323. 9 inch black hose -4 sold (10-14-07)
1324. 6.5 inch steel braided hose -5 (3x sold) (10-16-07)





135. Misc Metric lines

1325. Misc Metric lines for Spyders, 3 inch, 6 inch, 12 inch -1 each (16x available 2x 12 inch sold 1x 3inch sold 1x 6 inch sold)





136. Misc air line parts

1326. 12 inch hose could possibly fit mini cocker with front block screw through the front hole? -2 sold (11-04-07)
1327. Sentinel asa fitting and steel braided hose -6 sold (10-8-07)
1328. Sentinel asa fitting and steel braided hose -6 sold (10-8-07)
1329. Spyder bottom line -4
1330. Strange t fitting made of 2x nipples and some other odd reducers and a one way flow fitting? -5





137. Fill station

1331. Old Fill station. Uses black hose and ball valve. Steel fittings and parts are rusted but other looks alright, not tested -18





138. Kapp style drops

1332. Kapp drop without end braquet -5 sold (12-2-07)
1333. Kapp drop, cut -1 sold (10-21-07)
1334. Black empire drop with no asa -5 sold (2-2-08)
1335. Blue empire drop, no asa -5 sold (2-2-08)
1336. Kapp mictro drop zone -12 sold (10-21-07)
1337. Green drop zone in great condition -16 sold (2-2-08)
1338. Chrome empire with asa -16 sold (2-2-08)
1339. Kapp black drop zone with chrome asa -16 sold (10-20-07)





139. More drop forwards

1340. Rail with standard holes also in black gloss -6 sold (10-5-07)
1341. Blue phat drop with 2x holes and rail -4
1342. Rail with 2x holes in chrome -6
1343. CP rail with on off asa, used -4 sold (10-5-07)
1344. balck empire rail and drop zone asa with on off -7 sold (10-20-07)
1345. Used black rail drop -4
1346. red drop -3 sold (10-31-07)
1347. taso drop -10 sold (10-14-07)
1348. strange drop -4 sold (11-04-07)
1349. cp rail with 2x bottom line holes, some dings -8 sold (10-11-07)





140. Rails and quick disconnect rails

1350. Rail drop bar -4
1351. Air America drop rail, no set screws -4 sold (10-17-07)
1352. Air America drop rail with screws -4 sold (10-7-07)
1353. Old school Lapco (?) wegde, new -5 (2x sold) (10-20-07)
1354. Front side bottomline drop allows asa to be mounted on the side or bottom -5
1355. Old drop -2
1356. Rail -4
1357. Black nw quick disconnects with 2x bottomline screws -22
1358. Black nw quick disconnects, no bottom line screws -20 sold (12-17-07)
1359. Raw nw quick disconnects, no bottom line screws or back screw -18 (2x available)
1360. Polished nw quick disconnects, no back screw-20
1361. Chrome with bottom line screws -24





http://www.mcarterbrown.com/gallery/...sale-0141b.jpg

141. L and T stocks

1362. L Stock, raw, looks home made -13 sold (10-17-07)
1363. T stock with lots of holes, some polished on bottomline screw holes -18 sold (10-14-07)
1364. T stock in matt black, bottomline screw holes on mounting block look beat up a bit -17 sold (10-5-07)





142. Misc Stocks and parts

1365. 2x tank mounts, steel -6
1366. 2x tank mounts in aluminu,m for Sheridan or WGP wire stock -10 sold (10-4-07)
1367. Assault line stock tank holder, no screws -10 sold (10-17-07)
1368. Gas through stock -23 sold (10-11-07)
1369. P stock -26 sold (10-7-07)





More pictures:

http://www.mcarterbrown.com/gallery/...sale-0143b.jpg

http://www.mcarterbrown.com/gallery/...sale-0143c.jpg

http://www.mcarterbrown.com/gallery/...sale-0143d.jpg

http://www.mcarterbrown.com/gallery/...sale-0143e.jpg

http://www.mcarterbrown.com/gallery/...sale-0143f.jpg

http://www.mcarterbrown.com/gallery/...sale-0143g.jpg

http://www.mcarterbrown.com/gallery/...sale-0143h.jpg

http://www.mcarterbrown.com/gallery/...sale-0143i.jpg

http://www.mcarterbrown.com/gallery/...sale-0143j.jpg

http://www.mcarterbrown.com/gallery/...sale-0143k.jpg

http://www.mcarterbrown.com/gallery/...sale-0143l.jpg

http://www.mcarterbrown.com/gallery/...sale-0143m.jpg

http://www.mcarterbrown.com/gallery/...sale-0143n.jpg

http://www.mcarterbrown.com/gallery/...sale-0143o.jpg

http://www.mcarterbrown.com/gallery/...sale-0143p.jpg



143. Lever Stocks and Braquet tanks

1370. Lapco 3 bottle airsource with two 3.5 oz tanks on it. Has dip / siphon tube system made from brass. Tanks are threaded into stock and will need some lock tight before being being aired up. Polished aluminum. Very unique piece. -Keeping!
1371. Turrent stock clip, polished or raw? In good shape. -20 sold (10-8-07)
1372. Line SI Lever Changer Stock, in excellent shape with only a couple of very small dings! -220
1373. Micro ca2 stock with box and all paper work. Includes t handle and other smaller parts. Excellent shape. -75 sold (10-21-07)





144. Stock feeds

1374. 11.5 inch stock feed with feed gate -20
1375. 8.5 stock feed with feed gate -12
1376. 9.25 inch stock feed with feed gate -10 -sold (10-5-07)
1377. 12.5 stock feed with feed gate -12 sold (2-3-08)
1378. 10 inch stock feed with feed gate -13 sold (3-1-08)
1379. Profeed Powerfeed by Proteams Products, id= .875 -22 sold (10-5-07)
1380. Profeed Powerfeed by Proteams Products, id= .875 -22 sold (10-9-07)





145. Misc barrels and sizers

1381. Apex with palmers adapter, id= .8, good shape -76 – Sold
1382. Apex with palmers adapter, id= .8, good shape -76 pending (9-24-08)
1383. Freak insert .689 -10?
1384. Model 98 to spyder barrel adapter (allows model 98s to take spyder barrels) -7 sold (5-8-08)
1385. Vm to take autococker barrels -20 sold (10-20-07)
1386. Ccm .687 insert -10
1387. Stiffi .691 insert -10
1388. Cocker .675 sizer, steel with some rust -10
1389. Cocker .675 sizer, nickel brass -20 sold (3-29-08)
1390. Lapco .683 sizer -15 -sold (10-7-07)
1391. Lapco .685 sizer -15 sold (4-5-08)
1392. Lapco adapter to allow shockers to take cocker barrels -10 sold (10-15-07)





146. Autococker barrels 1

1393. Apex barrel, no apex, 8 inch -7
1394. Old WGP pro factory barrel, 9 inch -14 sold (10-7-07)
1395. AKA Javelin Barrel in excellent shape, pearlescent rose in color, 12 inch -15 sold (11-04-07)
1396. J and J straight rifled chromed brass. Chrome is flaking but bore is great, 12.25 inch -16 sold (10-7-07)
1397. Nickel Plated lapco, a couple of dings at the end of the barrel, used, 10 inch -15 sold (10-27-07)
1398. Polished bob long longshot, used, 14 inch -13 sold (12-2-07)
1399. Silver and black sp barrel, couple of dings at the end of the barrel, 14.5 -16 sold (10-7-07)
1400. Black sp barrel, couple of dings at the end of the barrel, 15.5 -15 sold (10-4-07)
1401. Black sp barrel, couple of dings at the end of the barrel, 15.5 -15 sold (10-8-07)





147. Autococker barrel 2

1402. Titanium long bow back, id= .690 -25 sold (10-9-07)
1403. Titanium long bow back, id= .684 -25 sold (10-9-07)
1404. Stock cocker barrel, 11 inches -10 sold (10-6-07)
1405. Stock cocker barrel, 11 inches -10 sold (3-10-08)
1406. Action markers barrel, 12 inches -14 sold (2-3-08)
1407. Action markers barrel, 12 inches -14 sold (3-28-08)
1408. Dye stainless in good shape, 14 inches -25 sold (4-5-08)
1409. Freak Back and front and 690 insert freak, 12 inches -40 sold (10-14-07)
1410. Blue excel barrel, 14 inches -14 sold (12-29-07)
1411. CCM Carbon fiber barrel –Sold





148. Automag stock barrels

1412. RT barrel with some small scratches in on spot, 11 inch -7 sold (10-8-07)
1413. RT barrel with a dent on end of barrel, 11 inches -4
1414. RT barrel with a couple of small scrapes, 11 inches -5 sold (10-7-07)
1415. Great shape, wear where it goes into body -13, 11 inches
1416. Good shape, small dings on end of barrel, 11 inches -8 sold (1-8-07)
1417. Good shape, small dings on end of barrel, 11 inches -8 -sold (10-6-07)
1418. No detent, used, 8 inch -4 sold (1-18-08)
1419. Good shape, couple of small dings, 8 inches -6 sold (10-21-07) (11-23-07)
1420. Decent shape, has line sticker all the way through the interior (bore) of the barrel? 8 inches-4 sold (1-26-08)





149. Brass Automag barrels

1421. Ja nd J straight rifled barrel, 8 inches, in great shape but tarnished -8 inches -15 sold (10-28-07)
1422. Boa, no detent, chrome or nickel is flaking, 10 in -20 sold (11-04-07)
1423. Plain Brass, could be a J and J, great shape, tarnished, 10 inches -12 sold (1-12-08)
1424. J and J straight rifled in good shape with small ding on end of barrel, 14 inches -16 sold (10-27-07)
1425. J and J straight rifled brass in good shape, 10 inches -20 sold (3-1-08)
1426. Good shape J and J, 12 inches -18 sold (10-28-07)
1427. Nickel plated J and J with some tiny flaking but overall great shape, 1 4 inches -20 sold (10-16-07)





150. Aluminum Automag Barrels

1428. Ja nd J ceramic, black in great shape, plastic detent, 14 inches -16 sold (10-21-07)
1429. J and J ceramic, has some crap on the inside, 14 inches -10 sold
1430. 32 degrees carbon fiber barrel in good shape, has plastic detent, 12 inch -22 sold (1-26-08)
1431. ACI zero gravity, no detent in good shape, 11 inch -12
1432. Sp splash grey with silver and black splash in good shape,12 inch -18 sold (10-4-07)
1433. Old school sp barrel in good shape, 12 inch -20 sold (3-19-08)
1434. Newer sp progressive barrel, used, 12 inch -11 sold (11-26-07)
1435. Newer sp progressive barrel, used, 12 inch -11 sold (10-14-07)





151. Spyder stock barrels

1436. Spyder stock 12 inch -4 sold (10-16-07)
1437. Spyder stock 12 inch -4 (10-11-07)
1438. Spyder stock 12 inch -4 sold (10-16-07)
1439. Spyder stock 12 inch -4 gone (9-11-08)
1440. Spyder stock 9.5 inch -4 sold (10-8-07)
1441. Spyder stock 9.5 inch -4 sold (10-8-07)
1442. Spyder stock 9.5 inch -4 gone (9-11-08)
1443. Spyder stock 9.5 inch -4 gone (9-11-08)
1444. Spyder stock 9.5 inch -4 gone (9-11-08)
1445. Spyder stock 12 inch -5
1446. Spyder stock 12 inch -4 sold (10-16-07)





152. Spyder aftermarket barrels

1447. Taso windforce, works great, 13 inch -10
1448. CP, great shape, 12 inch -13 sold (10-21-07)
1449. Taso Power series, 10 inches -14
1450. WGP, used 13 inches -6 sold (12-29-07)
1451. CMI, 16 inches -10 sold (10-21-07)
1452. Taso windforce, works great, 13 inch -10
1453. Dye boomstick, good shape, 18 inches -20 sold (10-27-07)
1454. Crown Point, has a dent on threads of barrel, 9.5 inches -4





153. Tippman SL and 68 special and NW slip fit barrels

1455. Dye strainless, will only work with sl or nw with a smaller pump, 14 inches -35 sold (10-7-07)
1456. J and J nickel plated, 16 inches -30 sold (10-16-07)
1457. Plain, with cut end, 9 inches -4
1458. Stock barrel, 10.5 inches -10
1459. TM-11 carbon fiber barrel, fit sl or nw, 11 inches -10 sold (10-15-07)
1460. TM-11 carbon fiber barrel, fit sl or nw, 10 inches -10
1461. Stock barrel -10
1462. Smart Parts, barrel is too thick to work with a pump handle, some ding, used, 15.5 inches -20
1463. 68 special barrel, new, 14 inches -15 sold (11-04-07)
1464. WGP sl-68 barrel, new, 14 inches -15 sold (10-11-07)
1465. WGP Sl-68 /68 special barrel, 14 inches -20 sold (10-11-07)





154. ICD thread barrels

1466. Stock polished Desert Fox barrel, ported, 9.5 inches -5
1467. New J and J chromed brass with straight rifling, 12 inches -27
1468. New J and J brass with straight rifling, 12 inches -22 sold (1-5-08)
1469. Long Tarnished J and J 14 inch -16
1470. Taso Power series stainless, 12 inches -16
1471. Taso Power series stainless, 12 inches -16
1472. Lapco used auto spirit, 12 inches -15 sold (12-27-07)
1473. CP chrome, pitted inside, looks like someone shot rocks? 12 inches -3
1474. New stock barrel, 9 inches -10





155. Prolite, Bushmaster, Montneel Barrels

1475. Bushmaster massive 18 inch barrel. Porting is raw but bore is in good shape -17 sold (11-04-07)
1476. Brass mega z barrel, 9 inches -10
1477. Old school grey Montneel barrel with brass insert and old school porting, 9 inches -12
1478. Super short promaster barrel, 4.5-10
1479. Brass J and J bushy barrel, 11 inches -20 sold (3-30-08)
1480. Bushy barrel, nice bore 14 inches -15 sold (3-19-08)
1481. Used Bushmaster barrel, bore has some marks, 10 inches -10 sold (10-5-07)
1482. Prolite / A5 OS Smart Parts ported, bore is good, some dings on tip -14 inches -20 sold (10-17-07)
1483. Stock prolite, 8.5 inches -5
1484. Stock prolite, 10.5 inches -5
1485. Stock prolite, 10.5 inches -5





156. VM and misc barrels

1486. Vm brass barrel with straight portaing, shroud is stuck, 10 inches -10
1487. Lapco trickit with one gash on the outside towards the end, bore is not so good, 12 inches -14
1488. Straight bored stock, not for sale
1489. Stock Vm barrel, 10 inches -10
1490. New aluminum Vm barrel, 8 inches -15
1491. Barrel extension for nelsons, id is .83, 10 inches -12 sold (10-8-07)
1492. Sheridan Extension, 8 inches -6 sold (1-21-08)
1493. Sheridan Extension, 6 inches -8 sold (10-27-07)
1494. Viper M1 barrel, looks good with shroud, 10 inches -5 sold (10-15-07)





157. Misc barrels

1495. Splastmaster barrel? 11 inches -10
1496. Ion Apex barrel without apex, 8 inches -4 (2x available)
1497. F2 barrel, has F2 engraved, 12 inches -8 sold (1-5-08)
1498. Stingray, 6.25 inches -3
1499. Wintec Thunderbolt Armson barrel, 12 inches, 25 Sold (10-7-07)
1500. Stock Wintec barrel in excellent shape, 10 inches -10
1501. Stock Wintec barrel in good shape, 10 inches -7
1502. BE barrel with shroud, 14.5 inches -50 sold (10-4-07)
1503. F4 griffen ram rod, 10.5 inches -25 sold (11-07-07)
1504. Rapide Barrel, new 12 -15
1505. Trracer barrel, 8.5 inches -5 sold (2-8-08)





158. Blazer Barrels

1381. Blazer or palmers brass apex (see number 1381)

1506. Jacko Infinity, used with some dings but alright shape -25
1507. Lapco, great shape -35
1508. Dye ultra light, some dings -30 –sold (2-8-08)
1509. Palmers stock brass in, small bore with triple wedgits -20 sold (10-9-07)


1382. Blazer or palmers brass apex (see number 1381)





159. Tanks

1510. 7 oz tank with aluminum on off. Great shape except has a rental number scratches on the bottom side lightly. Date is (6-1991) -12 sold (1-5-08)
1511. 7oz date is (6-92), great shape -10 sold (3-29-08)
1512. 7oz Missing on/off knob -6
1513. 7oz valve is missing on off part -4
1514. 7oz with brass on/off knob, date is (10-90) -12
1515. 7oz tanks with plastic on/off, lightly scratched with AM and then a rental number on the bottom (dates is 4-91) -10 (4x available 1x sold)





160. Pin valve tanks

1516. 10 oz tank in good shape, date is (5-88) -16 sold (11-04-07)
1517. 10 oz tank in good shape, date is (7-91) -15 sold (10-15-07)
1518. 7oz tank, date is (5-91) -7 sold (3-29-08)
1519. 7oz tank, used and painted, paint is peeling -5
1520. 3.5 oz tank in excellent shape, date is (4-89) -26 sold (10-16-07)





161. More Thermo Tanks

1521. Thermo Tank, 10 oz, used, date is (1-88) -12 sold (10-15-07)
1522. Thermo Tank, 10 oz, used, date is (8-88) -12 sold (11-12-07)
1523. 7oz thermo, date is (6-88) -8 sold (3-29-08)
1524. Black 7oz thermo, knob is included just not pictured, date is (9-88) -7 sold (3-29-08)





162. Compressed air tanks

1525. Aluminum tank dated (2005/06), reg is junk -20 sold (10-27-07)
1526. Aluminum tank, no reg, dated (7-04) -17 sold (10-27-07)
1527. 88ci tank date is (9-01) need new reg and hydro, great shape -40 sold (10-9-07)





163. Siphon tubes

1528. Part of a siphon tube -3
1529. siphon tube -7 sold (5-8-08)
1530. siphon tube -7 sold (9-8-08)
1531. Used siphon with some kinks in hose -3





164. Neoprene covers

1532. Camo 7oz tank cover new -10
1533. Camo 7oz tank cover new -10 pending (10-26-08)
1534. Partial cover for 12 oz tank, used -4
1535. 12 oz tank cover, used -5 sold (4-20-08)
1536. Black 7 oz tank cover, new -7 (3x available)
1537. Light green 7oz cover, new -7 (3x available)
1538. Black 12 oz tank cover, new -7 (3x available)
1539. Black 20oz tank cover -6 (2x available)





165. Butt Plates for co2 tanks Each number is a different style or size

1540. os 7 or 10 oz tank butt plate, some new and some used -3 (2x available 9x sold)
1541. 7 and 10 oz tank butt plate, some new some used, APP style –3 (3x available 1x sold)
1542. 7 and 10 oz tank butt plate, some new some used -3 (6x available 1x sold)
1543. Armson style butt plate for 12oz tank -3
1544. 12 oz butt plate -3 sold (9-8-08)
1545. 20 oz butt plate -3 (1x available 1x sold)





166. Old School Hoppers

1546. nos Large Usi Loader with lid -13
1547. Small usi loader, used -10 sold (3-29-08)
1548. Small usi loader used -10 sold (4-20-08)
1549. Old maxi loaders, used, no feed ramp version, doesn’t include cap but will fit any standard Indian spring pod cap. For caps see number (1563-1566) . -8 (3x available 1x sold)
1550. Old maxi loaders, used, feed ramp version, doesn’t include cap but will fit any standard Indian spring pod cap. For caps see number (1563-1566) . -8 (6x available 9x sold)
1551. Large maxi xl loader, no lid included but works with lids (1563-1566) -2 (8x available)
1552. PMI loader with soft lid -13
1553. Nos Molded loader with lid -12 (2x available)
1554. Sight feeder with soft life -12 (2x available)





167. More older school loaders

1555. WGP ammo box with glued on lid -10 sold (10-7-07)
1556. WGP ammo box -4 ((these would go great with the ammo box hopper, number 1645!) 5x sold ) (10-21-07)
1557. Paintball hopper -2 (2x sold) (1-5-08)
1558. Nos sightfeeder dominator, with correct lid -13 sold (10-27-07)
1559. BE pocket hopper -2 (1x available 2x sold)
1560. PMI nos butler creek lid -6 sold (10-15-07)
1561. Taso Nos butler creek lid -6 sold (10-15-07)
1562. PMI butler creek lid -5 sold (10-15-07)
1563. Generic pod lid for maxi loaders -1 (1x available 2x sold)
1564. Indian springs hard plastic lid for maxi laoders -2 (8x sold)
1565. Nice shape Indian springs more durable soft plastic lid for maxi loaders -3 (3x available 2x sold)
1566. Well used, soft plastic lid for maxi loaders -3 (7x available)





168.. Even More old School Loaders

1567. vl-90, used but lids are crack free -25 (9x available 3x sold)
1568. Excellent shape vl with extension that takes 10 rd tubes -30 sold (10-15-07)
1569. vl-90 with 2 extension pieces but not the ones for 10 rds tubes, once again, crack free -23 (1x available 2x sold)
1570. os VL-200, no lids with out revy block -5 (2x available)
1571. os VL-200, no lids with revy block -5 (8x available)





169. Newer loaders

1572. VL quannun, in good shape, sticker smudges on top, seems to work fine. -10
1573. 12v Vl revy in decent shape with softer plastic shells, not the hard be shells -20 (2x sold) (10-5-07) (5-13-08)
1574. vl -2000 9v powerseries used in good shape- 20 sold (10-7-07)
1575. OS vl-2000 in great shape -25 sold (10-4-07)
1576. Ricochet 2k blue -15 sold (11-05-07)
1577. extreme rage hopper, this thing is the worst -7 (1x available 1x sold)
1578. Halo TSA, works in great shape, has empire sticker on the side, all magnets are in place (size may be off since I photoshopped it in over a different loader but it is pretty close) -30 sold (10-20-07)
1579. Excellent shape pearlescent purple turquoise shells, complete with lid, both sides, -12 sold (11-26-07)
1580. vl-3000, good shape, works great -65 (2x sold)





170. Neoprene hopper covers

1581. Camo Vl-90 cover, new -10 (1x available 1x sold)
1582. Black vl-90 cover, new -10 (2x available)
1583. Black vl-90 cover, new -10
1584. vl-200 real tree cover, used -5
1585. Black vl-200 cover -5 (2x available)
1586. Camo Vl-200 cover -7 (2x available)
1587. Black maxi cover, used -3
1588. Black maxi cover new -7 (4x available 0x sold)
1589. Black vl 200 cover, new -6
1590. vl board -3 sold (10-8-07)
1591. vl-spacer for 12v revy converted to 9v -2
1592. vl battery cover, black -2 (6x available)
1593. vl clear 12v battery cover -3 sold (3-29-08)
1594. vl impeller -2 (3x available)





171. Vents stuff

1595. Vents, thermal lens has small crack -25
1596. Vents, has rental strap, lens has small crack, thermal -25
1597. Vents top of head -10
1598. Vents, has good strap but mask’s corner above lens is broken off and the lens is not thermal. Lens isn’t cracked -12





172 Older JT mask stuff

1599. Green Whipper snapper mask bottom -5 (2x available 1x sold)
1600. Black Whipper snapper mask bottom -5 (3x available)
1601. Green whippersnappers, used and has number carved on the front where the sticker would be -5 sold (10-20-07)
1602. JT fan, black and has good battery and works fine -10 sold (10-8-07)
1603. JT fan, clear and has good battery and works fine -12 sold (10-9-07)
1604. Green whipper snapper, used good shape, has camo strap -100000 or 10 dollars if you don’t care about the strap and buy something else
1605. Black used whipper snappers mask -12 (3x available)
1606. Soft stream bottom for elite lens -7 (2x available)
1607. Soft stream mask -8 sold (10-8-07)





Another pics:

http://www.mcarterbrown.com/gallery/...sale-0173b.jpg

173. AGD masks made for PMI

1608. Older style Airgun design mask in good shape -35
1609. Painted AGD mask -23
1610. Painted AGD mask -23 sold (10-4-07)





174. Misc old mask stuff

1611. woodstalk mask with uvex riveted to mask -6 sold (10-15-07)
1612. Woodstalk mask and uvex, separate -10 (6x available 1x sold)
1613. vforce visors -3 (2x available)
1614. googs lens –keeping this
1615. JT spectra visor with hole for fan -2
1616. JT Green spectra visor -2 sold (6-16-08)
1617. JT Black visor -2 (1x available 1x sold)
1618. Black visor for elite or whipper snappers -2 (3x available)
1619. Green visor for elite or whipper snappers -2 (3x available)





175. Knee pads

1620. Redz pads, beat to heck so I am keeping them
1621. Excellent shape app stiff knee pads, looks new except for a white smudge on one knee. These are really stiff and need a really good break, maybe running them over with a car? -10 sold (10-11-07





176. Gloves and gear

1622. Pi gloves, red size xl, new -6
1623. Pi gloves, yellow size xl, new -6 (2x available)
1624. Raven real tree camo gloves, size small -5
1625. App gloves, size small, new -5
1626. Redz neck guard in great shape -4
1627. JT neck guard -3
1628. Renegade knee pads in great shape -12 sold (3-19-08)





177. Squeegees

1629. Straight shot squugie, some have cloth, some don’t -4 (3x available)
1630. Taso possum tail -3 (5x available 3x sold)
1631. Tippman squeegee -3 (8x available)
1632. SMG 60 squeegee -10
1633. Grey Taso possum tail -3 (1x available 1x sold)





Packs and stock harnesses





http://www.mcarterbrown.com/gallery/...sale-0178b.jpg

178.

1634. Reds 4 vert pod pack, looks new, in great shape -15 or with pods -17 sold (3-31-08)





http://www.mcarterbrown.com/gallery/...sale-0178b.jpg



179.

1635. Redz 4 vert speed pod pack -10 or with speed pods -14 Sold (12-15-07)





http://www.mcarterbrown.com/gallery/...sale-0180b.jpg

http://www.mcarterbrown.com/gallery/...sale-0180c.jpg



180.

1636. Jacko 3 vert pack, well used -4 or with pods -6





http://www.mcarterbrown.com/gallery/...sale-0181b.jpg

http://www.mcarterbrown.com/gallery/...sale-0181c.jpg

181.

1637. Unique 4 vert and 2 horizontal and 1 co2 pack -14, with pods 17 sold (3-31-08)





http://www.mcarterbrown.com/gallery/...sale-0182b.jpg

http://www.mcarterbrown.com/gallery/...sale-0182c.jpg

http://www.mcarterbrown.com/gallery/...sale-0182d.jpg



182.

1638. 2x Indian springs 3 packs, tank holder, squeegee holder and suspenders -20





http://www.mcarterbrown.com/gallery/...sale-0183d.jpg



183.

1639. Sumo 4x horizontal and 1 tank pack -12 or with tubes -14





http://www.mcarterbrown.com/gallery/...sale-0184b.jpg

http://www.mcarterbrown.com/gallery/...sale-0184c.jpg



184.

1640. Plain black pack 4 horizontal and one co2 -8 or with pods -10





http://www.mcarterbrown.com/gallery/...sale-0185b.jpg

185.

1641. Shotgun bandolier that works good with tubes -8 or with tubes -10 sold (6-24-08)





http://www.mcarterbrown.com/gallery/...sale-0186b.jpg

http://www.mcarterbrown.com/gallery/...sale-0186c.jpg



186.

1642. JT harness, nice green -25 or with tubes -27, used green -20 or with tubes -22, black in good shape -25 (sold 10-9-07) or with tubes 27





http://www.mcarterbrown.com/gallery/...sale-0187b.jpg



187.

1643. Ronin stock butt harness, nice shape -17 or with tubes -19 -Sold





http://www.mcarterbrown.com/gallery/...sale-0188b.jpg

http://www.mcarterbrown.com/gallery/...sale-0188c.jpg



188.

1644. Tube belt -8 or with tubes -10 (3x available)





http://www.mcarterbrown.com/gallery/...sale-0189b.jpg

http://www.mcarterbrown.com/gallery/...sale-0189c.jpg



189.

1645. Ammo box harness -30 no ammo boxes included sold (10-27-07)





http://www.mcarterbrown.com/gallery/...sale-0190b.jpg

http://www.mcarterbrown.com/gallery/...sale-0190c.jpg

190.

1646. Army suspenders harness with squeegee -12





191. Misc gear, holsters and stock class items

1647. Splat master holster, some stains from paint, might come out if washed -10 sold (10-20-07)
1648. Uncle Mikes holster, tear on bottom -5 sold (1-22-08)
1649. Uncle Mikes shoulder holster, fits smaller pistol -5 Sold (10-7-07)
1650. JT wallet, might go real well with some straps duct tapped onto it so you can use it as a purse?? !Free! Looks like Walker will be making a Purse out of this wallet! -Sold (10-6-07)
1651. Wrist 12 gram holder, used -8 sold (10-16-07)
1652. Wrist tube or 12 gram holder -7
1653. JT watch and tube holder for JT stock class harness. Excellent shape / nos, new but battery is dead from sitting for 15 or however many years. -20 (1x available 1x sold)
1654. Tussing holster for pgp, strap is really long -15 sold (10-16-07)





192. Tank holders

1655. Black belt -3 (1x available 1x pending)
1656. Tank holder, excellent shape -3
1657. Ronin gear tank holder -3 sold (4-20-08)
1658. Used Straight shot squeegee holder for belt -3 sold (10-16-07)
1659. Used Straight shot squeegee holder for belt -3 sold (10-16-07)
1660. Sumo tank holder -4





193. Suspenders and belts

1661. Waist strap, green army utility belt -3 (2x sold) (3-1-08)
1662. Black belt -2
1663. Green suspenders, would work for harnesses -4





194. Small black packs

1664. 2x small pod pack -50 rd tubes probably (not included) -4 (3x available)
1665. Extreme rage 3 pod pack, has a belt loop and needs a belt, used -3
1666. 2 pod pack -2
1667. Pouch with belt loop –free (might work nice for holding straps?)





195. Small green and camo packs

1668. 5 pod harness for 50 rd tubes, has belt loop -4 sold (10-4-07)
1669. 2x Indian springs harness, has belt loop -4 sold (3-1-08)
1670. Baja USA pouch -3
1671. 2 pod harness with belt -4
1672. Reds 2 pod pack with belt, used -5





196. A whole mess of tubes

1673. Green tubes with caps -1 (15x available, some are new some are used and most are in overall good shape but a few have tape residue on them 12x sold)
1674. Black tubes with caps -1 (25x available some are new some are used and most are in overall good shape but a few have tape residue on them 22x sold)
1675. Clear tubes, -8 for a dollar (a lotx available)





197. Super cool barrel plugs!

1676. Fat boy barrel plug -2 sold (3-1-08)
1677. Plug with handle -2
1678. Knurled plug, came with some tricars -3 (5x sold)
1679. Knurled plug, has ring -4 sold (10-14-07)
1680. Knurled plug, sort of corroded -2
1681. EMR castle conquest barrel plug -2
1682. Older Worr Games plug -2
1683. Benchmark twist plug in blue -3 (blue sold(10-12-07)) or black -3 (black sold (10-8-07))
1684. Sight feeder plug with strap -3
1685. Sight feeder plug with arm band -3


Trades:
I am always looking for different misc things from time to time so please send me a pm or email.

Here is a partial list of a few of the things I am looking for right now:
Lapco parts, ghost trigger frame, valve body, Long grey three holed asa, skeleton sight rails, ect…

Automag parts (New or Old, really looking for a Milled RT Pro Rail to use with a Logic
Frame and that can fit a snatch grip and including a snatch grip would be a plus)

Mag Lvl 10 Powertube tip

Redz Knee pads third version size medium or large

VM bullpup trigger guard

Cocker/ Angel Detents

Armageddon Tank and parts as well as other AA parts such as apocalypse and raptor parts

Lever Feednecks that will work with mag bodies (Angel Threaded)

Dye tank covers

Halo shells and lids , any version or make...

Carter parts or Carter Guns, pump or semis

Matte Nickel Stabilizer (Male or Female)

Red Stabilizer (Male or Female)

PSI Brass Stock Tube Hornet

California Cobra

Long Barreled Puma

Boa Barrels or Wedgited palmer barrels

Art Books (Just let me know what you have, I might be interested?)

Idiocracy on DVD

Grand Theft Auto San Andreas for X Box

[thrive78]

PM sent

1364
1340
1227
1198

[Treadstone]

I'll take #s
1379- $22
1264,1265,1266 $5 each $15 total
1208,1209,1211 $1 each $3 total
532,533 $3 each $6 total
$46 total, double check my math please and let me know what I owe you for shipping.
Thanks

[Tigwldr]

Wow what a nice parts sale. Hope you sell them all.

[Lrrpie-CT]

121 16
131 12
312 30
1376 10
_________
68 + shipping to 06751

PM inbound

[Painthappy]

Sent my PM too... You know what I'm looking for, posted my list of #'s. Also something I didn't see on the board too.

Carter

[zeroh]

Interested in #1343 and #689
Does the cp on off work.
send me your paypal.

[Walker]

Dan,

I'll take these.... PM inbound...


Walker


272. Lapco spring retainer or pump arm spacer (goes under lapco pumps on specters and either holds in spring or gets rid of wobble) -3 One each

669. Foamie bolt with foamie -4 One each

1071. Wood panels with brass washer -6

1650. JT wallet, might go real well with some straps duct tapped onto it so you can use it as a purse?? !Free!

[Schmitti]

Number 1213 and 1216

Also sending pm.

E

[Zoo]

PM sent on my picks:
#667 - ANS venturi bolt w/ foamie = $10
#684 - New mag lock w/ set screw = $6
#735 (2) - foamie = $6
#1177 - CCI changer = $13
#1429 - 14" J&J barrel = $10

Shipping will be to 43230

PS - I think you've got #s 759 and 760 switched (and if not I want #759! lol)