|Misc Paintball Items Tanks, Barrels, Hoppers. Everything else paintball related is sold in here|
| ||Thread Tools||Search this Thread|
|03-18-2017, 09:38 PM||#1 (permalink)|
Pile O' Nelson Bits
I have decided to move away from Nelsons, aside from the one Nelspot that DashHopes sent to me, so the rest of the internal bits I have been hoarding over the years are in need of a new home.
What's included, you ask? Let's take a peek....
5 hammers (one brass, one polished, 3 without Sears or springs)
7 bolts (5 standard Nelspot with one being pretty rusty, one with extended center post, one with removable center stem)
1 in-grip valve (no pierce stem, but it was removed cleanly with a set screw in there right now to keep the threads clean)
4 powertubes (one with nut and cup seal)
Cup seals (5 Delrin with 4 of those being new, on new cci cupseal with extra seal, one extra brass cup seal)
Nelspot co2 plunger screw
SP gauge (0-300psi range)
Handful of screws
Leftovers from a NOS Pro Line spring kit (2 green, 2 yellow, and 1 red main spring)
Extra valve spring
Right side Nelspot grip panel, no cracks
Tiger Shark? Full valve set
Plastic case included
I will also include a full dropout valve, but it is non-working. It looks like the air passage was drilled off center and came through where the screw goes down and holds it to the frame. Not sure if it can be salvaged or not, but at the very least you will get the dropout bucket for another project.
If I find any other Nelson parts, I will add them in as well. I think I have another in-grip valve with the pierce stem attached. I'm on the hunt for it, and will include it when I find it.
Let's say $100 plus shipping, but feel free to offer
NO PARTING ON THIS ONE. There's no point in even asking, trust me. This all goes as one set, because I don't want to bother with parting this many small pieces.
If more pictures are needed, just ask.
Last edited by GanonsGrin; 04-01-2017 at 09:02 PM.
|03-19-2017, 09:32 PM||#2 (permalink)|
Feel free to offer
Trade-wise, I'm sill looking for a 45k HPA tank that will feed my automags, or I would do a partial trade for a complete spyder aka tornado valve
|03-22-2017, 08:46 PM||#4 (permalink)|
Extra in-grip valve was located! Sill looking at $125 shipped for now
|03-25-2017, 08:53 PM||#5 (permalink)|
I would consider trade fodder for this also.
I'm currently on the hunt for a gameboy advance SP and games, if anyone might be able to help out. Also looking for a new 45k HPA tank to feed my mags.
|04-13-2017, 11:27 AM||#10 (permalink)|
I will have to decline the offer right now, unfortunately.
|Thread Tools||Search this Thread|