Buy, Sell, Trade

[fastev]

Well, my plans have changed and these will not be put to use. First is a raw cocker body and backblock. This appears to be a CCM SV slug, however there is no serial number in the typical CCM location and there is no sight rail. 2k specs, wire detent, drilled for eyes. The feedneck was slightly damaged in shipping to me, there was a slight flat spot on one side of the feedneck. I repaired this fairly well, I did not go overboard as I didn't want to do any more damage. It takes an Angel feedneck, and said feedneck threads in without a problem. You can see the slight flat spot between 3 and 4 o'clock in the photo below. Also have a Jones Gun Works halfblock bolt, sled, and pin. These are of decent quality, I've seen better, but I've seen MUCH worse. Please see the disclaimer from JGW about their kit below the picture. I have not done a thing with these parts since I received them, aside from repairing the flat spot on the feedneck. Prices are firm, shipped, and these are sold as-is. Feel free to as any questions, I can get more pictures upon request. The only trade I'm interested in would be these parts towards a Blazer.

Body has been sold.
$40 for the halfblock parts



Quote from Jones Gun Works regarding their halfblock kit-
"Note these bolts and kits are designed to work with markers that have been milled to the 3.2 and .90 body dimensions. They have a diameter of .685 which most stock bodies are bored to. We do not guarantee our bolt will work with all bodies as there are some very poor quality clones and conversions. Please measure your markers bolt hole and make sure it is larger than .685 Likewise make sure your conversion is correct i have run into far to many people who did this conversion wrong and then get mad at me when their gun doesn't work."

[dimsum]

would you take $100 shipped for both?

[Jordan]

PMed about the body.

Jordan

[fastev]

I will accept offers on the halfblock kit...