Buy, Sell, Trade

[pump]

These Sniper/Cocker pump Autotrigger kits Fits 45 Sliders and DYE pivots.


This Autotrigger does NOT fit CCM frames at all!!!!!



$25 Cam Sold out!!! it will take a while, BLAME THUMPER

$20 drilled Pump Rod only
or send it in to get drilled & tapped for only $10


Lever Blowout Sale $10!!! Self Installs DIYs & Email purchases only!!!
due to my designing the length as short as possible so not to interfere with the Ball Detents i have forgotten that some frames even within the same manufacturer have differently placed Safety holes, so the screw hole for the cam the in lever might need to be slotted some for extra length. I have already slotted the current slot some as well, and it works fine for most frames, but knowing that there will be some variation with all different types of frames it might take some extra slotting. So im Selling them SUPER CHEEP 10 bucks!!!!!

remember Email orders only......inbox is too full now
koaisaok@gmail.com

Trigger Plate Modification:
$20 to Mod a Slider trigger plate
$50 to mod a ANS or AKA trigger plate

I use Titanium Putty from Devcon, it does wear off a little but i have had the same slider with Ti Putty for 2 years and havent had to replace the putty yet, also it slight wears the cam polishing it like how 600 grit paper would....i have been using a cam 10 years old (using the putty plate for 2 years) and its still ok




modding your own trigger isn't that hard The Autotrigger Strikes Back!!! thread has information, and i would much prefer you to do it.



What you need to install an autotrigger

1) Slider plate with flat spot for cam, or a Dye/32 degrees pivot
2) Pump rod with hole drilled into it
3) Trigger frame with safety hole
4) And most importantly....the ability to think.....no stupid people please

if you own a pump rod you could either drill and tap the hole for a 4-40 screw, or send it in to me for $10 Or buy one from me for $25


if you have a Dye Pivot frame(or any knockoff) the AT cam Drops right in with no mods to the frame, i hate all who have them i am jealous.


if you Own a Slider frame trigger plate you will need to mod it like the pic above or get it modded by me for $10, Best to DIY!!! its really easy.....just need TI Putty, or know how to weld, or know people who can do it for you.

just make sure the surface is flat like in the pic...and it clears the Safety hole and youll be ok


If you own a CCM Autotrigger kit and want to use your old frame especially those with matching anno you can just buy the Cam and mod your trigger plate to receive the cam, or if your frame is a DYE hinge/pivot...dont need to mod a thing.



DISCLAIMER, these are not drop in and require some tunning/adjustment. But as MCB members you should feel that this is an integral part of paintball, and that small amount of personal tunning/adjustment to your marker makes it better than any other marker out there
well....thats how i feel


for questions please email koaisaok@gmail.com
or IM me

[pump]

tiger UPpercut!!!

[Furion]

I think I'm missing the whole message. Or maybe I'm really tired and hungry.

If I want one of these for my slider sniper it would cost me: 45(A/T Setup), 65(For the frame modification?), 30(if I don't have my own trigger plate?

So the total would be 140?

[Sly1]

pretty much man, at least... thats what I'm thinking..

[pump]

oh thanks for letting me know......i am having a hard time making it clear

45 for just the Cam and Lever

65 for Cam, Lever and Pump Rod,

75 for Cam, Lever and Pump Rod, and trigger plate modding(youll have to send it in....but its not hard to do yourself)

100 for Cam, Lever and Pump Rod, and to mod either an AKA or ANS plate, because its a hard plate and it has lots of material to remove


25 for a Cam
25 for Lever
25 for a drilled pump rod

$10 to drill pump rod
$10 if you just want me to mod the trigger plate Or $30 for ANS or AKA trigger plate modding...(primarily because i dont want to do it)

that make more sence?

[Sly1]

are you making these? I thought it was a ccm thing..

[pump]

CCM makes Autotriggers as well....but they dont fit non CCM frames without modding the frame and modding the plate a lot

my Autotriggers fit non CCM frames, 45 frames like Benchmark Dye etc

[Sly1]

ahh, cool

would they fit ccm frames also?

[pump]

Originally Posted by pump

my Autotriggers fit non CCM frames

uh.....i thought i said that?


doh i didnt
man punctuation shes a bitch

[Sly1]

no, you said it I was just wondering if it could go on one also.. I guess not though
cool dude.