Buy, Sell, Trade

[lexiones]

ok heres the deal I have about 7 boxes of stuff that i was going to sell at castle.....then it rained suprise suprise.
so heres the begining or nearly 500 items that will be for sale in the coming week.
so rules:
1. all prices are OBO so feel free to offer.
2. paypal or m.o. preffered. if you cannot do this let me know.
3. when coresponding with me please incude the items you would like.
4. trades are welcom but not preffered. feel free to make offers.
5. best way to contact me is by PM on here or MCB
6. 10% of all proceeds go to the scp bunkhouse.

so without further ado, heres the list part 1
_guns_
1. b.e. poison:works and shoots fine-$35
2. icd alleycat: modded for spring feed, lapco bigshot barrel(willing to sub with any icd barrel for aprice)-$70(30 of which goes to the SCP bunk house tword a deck)
3. 2k2 cocker: bone stock, freshly timed(willing to install any cocker part in this sale and I will retime for no extra charge)-$150
http://lexiones.googlepages.com/3gun...3guns-full.jpg



-icd parts-
5-14 icd threaded bigshot lapco barrels(overstock from east coast paintball)-$30
15-18 3x 10" dye boomsticks 1x 12" dye boomstick icd threade-$80
19 chrome cp barrel(icd thread) - $25
20 purple cp barrel(icd thread) - $20
21 unknown brand icd threaded barrel - $15
22-24 spyder(gun) to icd(barrel) adapters - $7
23-26(yea yea i know typo) bushmaster bolt pins - $5
27-31 bushmaster featherlite triggers(these were made for the ECPB reflex bushmaster, and i have a metric ton in any of the colors shown) - $5
32 ECPB reflex bushmaster hi-flow valve(i have about 5 or 6 of these) - $20
33 bushmaster rev-c board - $20
33-34 bushmaster vertical adapter w/ banjo fitting(allows you to use a standard threaded reg on a bushmaster) - $10
http://lexiones.googlepages.com/bigshots.G...gshots-full.jpg
http://lexiones.googlepages.com/icdb...dbrls-full.jpg
http://lexiones.googlepages.com/bushyparts...yparts-full.jpg



-cocker parts
36 xonic eblade solenoid cover(basicly a e1 solenoid cover):$5
37 sledgehammer lpr:$10
38-39 pre 2k front block(stock):$5
40-42 warped/dark vertical adapters(2k+): $15 - 1 sold
43 OTB STO bolt: $10
44 aka lightning bolt(2k+ unmilled) : $25
45 old purple ans bolt(used):$5
46 2k+ angled minicocker frontblock: $25
47 shocktech(i think) blue pre 2k frontblock:$10
48 kapp chrome frontblock 2k+ : $10
49-50 demonic highrise clamping feednecks:$10
51 blue 2k+ frontblock:$10
52 stock pewter feedneck:$5
53: shocktech lightened frontblock 2k+(no meat on this thing):$15
54 kapp backblock purple: $10
55 chrome kapp backblock(very light)2k+: $10
56-59 kapp trigger plates(green black purple and red):$5
60-62 shocktech trigger plates(1x chrome ) $5
63-64 stock sears-$5
65 stock 96 barrel:$7
66 shocktech roller sear(blue):$20
67-70 pre 2k backblocks:$5
70-71(whoops typo again)shocktech cocking rods:$5
72 cocker threaded barrel-$5
73 psychoballistics hinge frame:$15 with stock sear $30 with roller
74-79 chrome or black dark demon beavertails:$10
80 purple shocktech beavertail:$10
81 ans Low pressure chamber:$10
82 composite frame:$10-sold
83-86 WDP gated feednecks(like the IR3 had) :$15
87 flame trigger for wgp frame(purple) $7
88 shocktech bomb 3-way (purple):$20
89 bomb 3-way body(no shaft): $5
90 32* hammer and ivg(stainless) $10
91 stock beavertails: $5
http://lexiones.googlepages.com/cockerpart...rparts-full.jpg



-angel parts-
92-102 kapp feednecks with setscrews$5 1 low rise sold
103-113 assorted volumizers: $7 112 is sold
114-116 rebuild kits $10
117-126 feednecks$5 - these work perfectly as hopper adapters for sl-68's
127-129 NW o-ringed feednecks(2 are highrise parts) $7
130-132front plugs $5
133 clear breech knob:$5
134-135 massive volumizers:$10
136-139 blue red and silver buttons: $ 5
140-151 cp feednecks:$5 149 is sold
152-153 kapp breech knobs:$5
154 dark cog breech knob:$10
155 dark backplate: $7
156-157 dark cog delrin detents $10
158 cp roller trigger(also fits gen-e matrix):$15
159 stock trigger:$5
160-163 wdp angel wings and warped dark wings: $10
164 dark snatch grip:$10 - sold
165 angel gel grips(also fits gen-e matrix):$5-sold
http://lexiones.googlepages.com/angelparts...lparts-full.jpg

-first update10/6-

-angel barrels-
166 dye xcal - $25
167 169 chrome cp barrels: $25
170 10" black cp barrel: $20
171 OS SP progressive
172 inknown : $15
173 stainless steel lapco bigshot: $50
http://lexiones.googlepages.com/angelbarre...arrels-full.jpg

-rebuilds-
174 IYF spyder thumb screws - $5
175 mag barrel kit(wire nubbins) - $5-sold
176 f1-f2-aft-f4 rebuild kit - $10-sold
177-178 a-5 cyclone rebuild kit: $10-sold
179 68 carbine(cvx valve) rebuild: 10 - sold
180-182 pbc LPR rebuild kit: $10
183-184 complete ergo reg rebuild(this thing has just about everything but the housing):$15
185-186 rebel rebuild kit:$15
187-189 pro-lite bebuild kit : $10 1 sold 2 avail
190-192 raptor rebuild kti : $10

http://pages.google.com/edit/lexiones/rebu...ebulds-full.jpg


update 10/6 #3
timmy stuff-pic aint great but i can get more if your interested.
193-196 timmy volumizers $20
197-199 iron cross timmy ram caps(adjustable 2x silver, 1x black)-$15
200 sp adjustable ramcap - $15
201 timmy eye covers $20
http://lexiones.googlepages.com/timmystuff...ystuff-full.jpg


-matrix stuff-(same deal as far as timmy with pictures)
202 nickle aka soda can lpr -$45(labled at $80)
203 black aka soda can lpr - $45
204 black NDZ vertical adapter - $15
205 black NDZ 15* vertical adapter - $15
206 function clamping feedneck - $20
207 non clamping feedneck - $5
208 BLACK NDZ no-rise clamping feedneck - $20
209 silver NDZ no-rise clamping feedneck - $20
210 red demonic hi-rise clamping feedneck-$10
211 blue demonic hi-rise clamping feedneck-$10
212 pewter demonic hi-rise clamping feedneck-$10
213 dark snatch grip -$10
214 trinity clamping feedneck - $20
http://lexiones.googlepages.com/matrixstuf...xstuff-full.jpg

it's drop night!!!!!!!
215, 216 : gravity massive drops $30
217-218 gravity asa - $10
219, 220 gravity asa with rail mount - $15
221 blue "tribal" gravity drops(milled for rails or with normal asa spacing) $20
222 gravity "bubble" drop(^same deal) $20
223 black "tribal" drop(no rail mount) $15
224 green tribal drops(with rails) $20
225 gravity rails: $10
226, 227 "tribal" style in red(with rail): $15
228- gravity pull pin drops: these are 2 peice drops using only a pull pin to remove the asa, or rail from the drop itself. price = $30 for a full drop+$10 per extra peice. my only limiting factor is the pins themselves right now. I have tons of parts in all the colors you see.
229 gravity regulator extenders: a very good option if you want to put a gauge after your vertical reg, or for those short icd regs. rainman had a good idea of using them for spimmy regs. -$10

http://lexiones.googlepages.com/drop...rops1-full.jpg
http://lexiones.googlepages.com/228.JPG/228-full.jpg
http://lexiones.googlepages.com/229.JPG/229-full.jpg

update nighttime 10/8

230 purple shicktech rail drop - $10
s31 shocktech rail asa - $10
232 purple gas thru foregrip - $7
233 red gas thru foregrip - $7
234 dye gas thru foregrips - $10
235 vigilante regs that need rebuilds - $15
236 unknown brand adjustable length drop - $10
237 chrome expansion chamber - $15
238 black expansion chamber - $15
239 SP gadget grip - $ 15
240 new wgp reg - $15
241 LP vigalante reg - $35
242 centerflag LP reg - $30
243 spyder bottomline addapters - $7
244 Spyder bottomline-$5
245 ugly beaten up asa - $5
246 thermo-valve adapter - $10
247 unknown tank reg(untested) - $20
249 dead on(i think) drop and rail asa(no internals for the asa) - $15
250 a-5 asa $10
251 hoses.....just ask if i have it, I most likely do. $10 (more or lsee depending)
252 black cradle - $20
253 15* tank angle thing - $5
254 drop and on/off(adjustable length) needs o-rings for the on/off - $20
256 empire cradle - $20
257 cp rail(most compressed air tanks get caight on these, co2 tanks are ok though) - $15
258 M3 rail(works on m3, and dye rails) - $5
259 used cp flame drop and on/off - $25
260 dark drop - $25
261 purple cp rail drops -$15

http://lexiones.googlepages.com/aira...ories-full.jpg



262 sl 68-1 parts(body valve pump handle barrel. body actaully still has the sale sticker on it.) $25
263 lapco tippmann 98 raised sight rail(we have these in black pewter and chrome) - $10
264 maverick parts(body that can take a cci feed block, shortened barrel, new bolt/hammer combo, powertube, and cupseal - $20
265 a-5/98 bolt- $5
266 i think this is a dm bolt and housing, but i'm not sure - $10
267 untested 98 valves - $10
268 spyder LPC - $5
269 matrix breech(from a nyx, so it can use eyes) - $15
270 wgp boss feedneck - $10
271, 272 spyder feednecks
273 lapco spyder vertical tank adapter - $10
274 spyder compact(or other scre style) rva-$5
275 pin style spyder RVA - $5
276 ion feednecks-o-ringed(i have a ton of these)- $5
277 powerfeeed plug - $5
278 spyder dip switch board untested - $10
279 spyder starfire bolt - $10
280 bob long cyclone bolts - $10
281 i think it's a vl bolt - $5
282 used lvl 10 bolt(tested and working) - $40
283 evil feedneck extender - $5
284 spyder valve - $7
285 spyder co0mpact body - $20
286 spyder triggers - $5
287 tippmann K&k ring trigger
288 - metric thread converters - $5
289 trigger guards - $5
290 zap zxs barrel(close to spyder) barrel - $5
291 unknown thread barrel(looks like phantom but larger diameter, no shank) - $5
292 stock tippmann 98 barrel - $5
293 a-5 collar and barrel - $10
294 a-5 barrel -$5

http://lexiones.googlepages.com/part...parts-full.jpg



295 air power stock with pro-connect and remost(i will break this up if need be) - $60
296 butt plates - $5( or $2 with any other purchase)
297 bag o king cobra(just about everything is there, perhaps missing some screws) - $15
298 pgp valve(old style) - $10
299 wire stock(needs screws) - $20
300 cp barrel stand - $25
http://lexiones.googlepages.com/part...arts2-full.jpg


301 ptx frame - $10
302 ptx grips - $5
303 spyder sprint frame(no board) - $10
304 ion triggers(i have a ton of these) - $5
305 phantrom trigger - $5
306, 307, 308 - dye stickies - $7
309, 310 lonestar grips - $5
311, 312 hogue grip - $5
313 - m-3 grips - $5
314, 315 panel grip - $5
316 shocker frame
317 dragunfly frame w/ board - $15
318 toxic matrix magnetic frame(some nasty milling on the back, but only cosmetic - $35
http://lexiones.googlepages.com/grip...grips-full.jpg






more added daily

[blackrain]

If only that was a straight mini block.
Later,
Blackrain

[Rainman229]

lexiones

damn didn't realize you had that many angel feed necks with you at castle.
let me know if you want or can do a package deal on all of them. have something crazy to do with them in my mind.

[blackrain]

I'll also take # 42 with that one angel feed. Sorry rainman lol. I'll also take #81 LPC if thats 2k+ threads.
Later,
Blackrain

[lexiones]

rainman pm me with an offer. one of the low kapp ones is sold. pmed everyone back.

[lexiones]

edited for more

[Brinstar]

I'll take 175, 176, and 177

[lexiones]

whoops didnt mean to post

[guy1198]

179 68 carbine(cvx valve) rebuild: 10
187-189 pro-lite bebuild kit : $10

will take these for 20 shipped.

[lexiones]

updated and pmed everyone. for everyone who paid a little extra for paypal it is appreciated.

edit:I will do an update of sold stuff in the morning, but most is still available

just found this out:
117-126 feednecks$5 edit: these work perfect as aluminum hopper adapters for sl-68's