Buy, Sell, Trade

[Mystwulf]

Paypal Preferred, Buyer pays 1st--then shipped, Prices are OBO and Shipping is extra. Thank you.

Edit:...wait for it...wait for it...THERE IT IS! Just needed to figure out how to post them here!

I’ll post pictures later but I’m trying to post this stuff as many places as possible to avoid EBAY after the last screw job I got on an EBAY sale! I’ve been using this ID on PBN. PBR, Mcarterbrown, AOG, and a local club site, Tunka.com, for some time so feel free to check me out. My EBAY ID for feedback reference is ‘teajaxs’ and I’ve sold a number of paintball items there with nothing but 100% POSITIVE! Automag Owners forum feedback: Automags.Org Online Forums - Mystwulf Trader Feedback.
I sold a PTP Micromag there to a pleased buyer.

So I've got my surplus tanks back from Hydro with Brand New Guerrilla Air Myth regulators and I really don't need 3 x 68ci 4500psi, and 2 x 68ci 3000psi air tanks. If anyone is interested I'm looking to sell three-four of my tanks, New Hydro and Myth reg on each. I have used a couple of the tanks a little bit for testing, one of the 68/4500s (Empire Fuel) for about 1700 rounds and one of the 68/3000s for about 150 rounds, and they both worked great on my Sniper pump and my Freestyle Pro!

The Steel/Alloy Tanks make great remotes because they fit many packs that fit a 20oz CO2 tank!



68ci 4500psi (carbon fiber) =2 available, hydroed 05/08) --One Pure Energy tankpending , One Empire Fuel pending(THIS TANK IS TC STAMPED 'TC-SU 5134-310',pm for shipping quote to the north.)
68ci 3000psi (alloy) = pending(one hydroed 11/07, other 05/08) --One Pure Energy tank, One Catalina.



All good for five years from Hydro Date!
These make for a great upgrade people... especially when the cooler weather hits. They are 600psi output so may not work for some Spyders and Tippmanns, but I've got a local shop with some high pressure output springs from Guerilla Air ($11 extra installed). Would like to have some or all of these gone before the baby is born next month!

I also have a freak kit in near new condition that I'm looking to sell... either in pieces or all together. (all pieces barely used at all!)
Full (8 piece aluminum) insert set, new style in box: $55 OBO
(Blue insert .689 has slight discoloration on one end, nothing affecting performance)

One stainless insert .689: $10 ---Sold
Autococker threaded back: $30 ---Sold
14" New style matte black milsim tip: $20 ---Sold
14" Old style All American gloss black tip: $20 Available
12" New style matte black milsim tip: $20 ---Sold
Approx. 11.25" Old style All American Gloss Silver tip: Sold
All barrel lengths are when put together with the back.
I will work a package deal if people want all or several pieces.


I also have a Sheridan P68SC pump marker for sale in good used condition. It does not include the 12gram plug, but has a constant air adapter with a braided steel hose going to a bottomline ASA (grip frame is stock and has been drilled). I really like this set up as I've always liked limited ammo but preferred constant air to costly 12grams. Marker shoots nice and doesn't leak. $135 obo---Still Available!

Really hate to sell but I also have a crossman 3357 paintball revolver and matching pellet version (2 pistols). ---Good news! I found my crossman pellet revolver and swapped the frame with the other one and IT WORKS quite well! I made a minor dremmel modd to the pellet frame (something that was already done to the other frame I have) because a small part of it blocks the cylinder from sliding off when you break the action open for a cylinder reload. Otherwise you have to remove the barrel with a screw driver to reload (which I did for testing, not convenient during a gunfight). Anyway, I did this work and shined up the barrel a bit; the barrel is a little rough inside which may be causing some inaccuracy, but I think more likely it's just the old can of balls I'm using. There was some rust spots in the barrel which I attacked with a bronze gun cleaning brush and some solvent. It looks much better now but you can still see the marks in the bore where the rust was. A good, true polishing would likely make it mirror again. I did break one ball in a dozen test fires because one of the two cylinders I have has a worn tooth and did not line up perfect when it cycled (yes, TWO cylinders are included). The extra pistol frame is for parts and airs up without leaking, but has very little power for some reason. The .017 caliber pellet barrel is in excellent shape with one cylinder and is included in the price. This is a project I would love to keep for the sheer feel and look to carry at local scenario games as a backup; but I will let go for the right price, say $185 obo

I also have an older Halo A ($30) and VL Evolution 2 ($25) (View Loader Evo Egg II) both for parts. Also used pod packs (4vert+1hori, $10), masks (most need lenses $5), hoppers (standard gravity [$3] and used revy [$20]).

Please email me with offers, questions or requests for pictures. Thank you

Key Words: Autococker Dye Matrix Bob Long Intimidator Trilogy Smart Parts Smartparts Promaster Bushmaster Freestyle ICD Alien Fusion Marq Cyborg Freeflow E blade ultralite Cocker Timmy AKA Viking BKO Wrath Action Markers Sentinel Diadem Ule Spec Ops Milsim Mil-sim Military Woods Speed Ball Halo Empire PMI Fuel Pure Energy Crossfire Nitroduck Nitro Duck N2 Comp Air Scuba Custom Parts CP America Low Pressure High Pressure LP HP Preset CU CI PSI Brass Vintage Palmers PPS Pursuit Shop Paint Ball

[Mystwulf]

For some reason they are not posting like on another forum so here is the photobucket album. There are just a handful so far but more will be added till everything is there.

Edit:...wait for it...wait for it...THERE IT IS! Just needed to figure out how to post them here!

Mystwulf31/For Sale - Photobucket - Video and Image Hosting

[rajinmajin986]

interested in pics of all items. let me know when they are posted

[Gen]

Would really love to see the P68SC, very interested.

Thanks,
Gen

[Mystwulf]

Ask and you shall recieve...
***7oz NOT included.***








As you can see it has the usual wear and tear for a 15-20ish year old gun. The barrel bore has some fine scratches and could probably use a polishing, but it shoots very nice. I just (five minutes ago) put 20 rounds into my backyard, easily shooting a head size group on my old TV Dish from 50 fit with crappy old paint. I also hit a 3inch leaf on the second try (1st missed by 1/2 inch) from the same distance. I haven't chronoed it yet, but my educated guess is 260-280 fps. Using a tank for a stock also allows a nice rock-n-cock motion against your shouder, one reason I like the bottomline. I am using a 7oz anti-siphon which is not for sale. If I could keep this longer I would try it with a gas through stock on remote with one of my 68/3000 tanks, but then I would probably not sell either and my wife would kick me out!

[DSA]

Ill take the ss freak insert drop me a pm.

[Mystwulf]

Pm sent to DSA.

[infamoussmiley]

pm sent on p68.

smiley

[DSA]

pmt sent

[Mystwulf]

Two payments recieved heading to the Post Office...

Who's next!