F/S/T Gear, Valves, Bodies, Tanks, Hoppers, Devilmag, And More

rgunn4 · 12-01-2006, 09:57 PM

Rules: Be mature, feel free to ask questions, I don’t ship first if you are buying something, but might ship first if we trade, I also take paypal. All prices DO NOT include shipping. Shipping will be between $3-$10.
- ALL PRICES ARE BEST OFFER.
- PLEASE READ EVERYTHING BEFORE YOU ASK A QUESTION
- THERE IS A $10 MINIMUM TO BUY FROM ME. I just don’t like taking the time to ship out something I sell for $3.
- Discount if you buy 3 items or more.
- More pictures available at the bottom link.
- I have tons of feedback at the link below. Thank you and God Bless.

1. EGO FEEDNECK: Used for the vert minimag body. Would like to keep together, but I might part with it: $15

2. SPYDER VERT FEEDNECK: Backup to the Ego feedneck and works just fine: $5

3. VERT FEED MINIMAG BODY: Cut and powder coated by LUKE and just needs a small spacer in the back to fill the gap between the valve and rail: $40

4. SOLD

5. SOLD

Picture of above parts put together:
http://www.pbase.com/rgunn4/image/67749533.jpg
http://www.pbase.com/rgunn4/image/67749534.jpg

6. POWDER COATED STANDARD FEED BODY: Done by LUKE and looks great: $20

7. SOLD

8. SINGLE TRIGGER FRAME: Basic trigger frame with safety: $10

9. RT RAIL: Little to no scratches. Can come with sear, pin and foregrip extension: $25

10. SOLD

11. P-STOCK: Rare and very comfortable: $20

12. GAS THROUGH: Came off a REX II cocker: $20

13. GAS THROUGH EXTENSION: Lets you extend your gas through or reg. Few scratches: $15

14. TIPPMANN TO SPYDER BARREL ADAPTER: Pretty sure it’s for the 98, but it threaded into my 98C just fine: $10

15. ANGLE FEEDNECKS: 2 ULE body feednecks, 1 no name, and 1 Cobra mid-rise: $5each - the blue ULE feedneck is SOLD

16. MAG SEARS AND PARTS: 3 sears w/ bottoms, 1 sear w/o bottom, 2 springs, emag on/off, and 2 sear pins. Little to no wear on most: Sears-$10each, On/Off-$15, Pins-$2each (1 sears and pins are sold)

17. LVL10 BOLT: Comes with spacers, shims and orings, but no power-tube tip: $20

18. TUMB SCREWS: 1 screws with little wear from use: $8 (one already sold)

19. WARP POWERFEED PLUG: Lets you use a warp feed on a powerfeed body: SOLD

20. SOLD

21. SOLD

22. RT FORGRIP EXTIONSION: Might have some screws for it too. Comes with RT rail: FREE w/ RT Rail

23. SOLD

24. PMI EXPANSION CHAMBER: Works great: $10

25. TIPPMANN EXPANSION CHAMBER: Works great: $10

26. LUKE WARP ARM: Free if you have a warp and buy something else: Free

27. COCKER PARTS KIT: Has tons of orings, springs, ect. Also has a valve tool: $20

28. NEW IN BOX AUTOMAG PARTS KIT: Bought from Tunaman, but never used it: $25

29. COCKER 14” SP BARREL: $20

30. COCKER 14” .693 BARREL: $15

31. AUTOMAG 14” CENTERFEED CERAMIC BARREL: $25 - $10 with vert body

32. AUTOMAG 12” POWERFEED SP BARREL: $20

33. AUTOMAG 12” CENTERFEED DYE EXCEL BARREL: $25 - $10 with vert body

34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all

35. 12oz CO2 TANK W/ SQUEEGIE HOLDER: It’s in date and holds air: $15

36. 68/3000 ACI TANK: In date, comes with cover, but leaks a little out the pin which doesn’t matter when you have it on a gun: $80

37. SOLD

38. EMPIRE HALO BLACK SHELLS: Shells only, non-sanded and no lid: SOLD

39. 20oz CO2 TANK W/ REDZ TANK COVER: $10

40. SOLD

41. SOLD

42. CO2 BUTT PLATE: $5

43. SOLD

44. SOLD

45. SOLD

46. ULE AM RAIL: Powdercoated and milled by LUKE: $30 obo

47. SOLD

48. VERT ASA: $15obo or $5 with ULE Rail

49. PMI GAS THROUGH: $10

50. SOLD

51. SOLD

MORE PICTURES HERE:

http://www.pbase.com/rgunn4/1106_gear

MORE STUFF FOR SALE HERE:
http://www.automags.org/forums/showt...17#post2262017

TRADE OPTIONS:
- NEW MINI PAINTBALL GUN
- STIFFI COCKER BARRELS
- PC BASED MP3 PLAYER (ZUNE, CREATIVE, ect)
- VIDEO EQUIPMENT
- DIGITAL CAMERA
- SINGLE TRIGGER SHOE
- CP REG
- COCKER BOLT
- CP DIRECT MOUNT ASA
- SMALL HOPPER
- COMPUTER GEAR (Nice video card, HD, ect.)

oldschooldave · 12-01-2006, 10:18 PM

i would like to get
15. ANGLE FEEDNECKS: 2 ULE body feednecks, 1 no name, and 1 Cobra mid-rise: $5each the blue one
26. LUKE WARP ARM: Free if you have a warp and buy something else: FREE
34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all
thanks ,
dave

B · 12-01-2006, 10:59 PM

Please edit the sale text there is no need for all caps and or random caps. This is a mature forum please act accordingly, this includes reading the rules too. All sales must be posted here not linked too please edit the post to reflect this rule.

rgunn4 · 12-01-2006, 11:36 PM

I'm very familiar with the rules cause I've been on mcarterbrown.com for a long time. I re-read the rules and I saw nothing regarding caps within the thread. I did it to help the title of the object for sale to stand out. If that is wrong then let me know and I'll make the changes. As for the link I'll take it out, but my understanding of the link rule is that you can't simple post a link to another thread or forum. My link is just to another forum with the same items for sale for the most part. The other link is for more pictures. I'd be willing to make changes as needed if I'm breaking any rules. Thanks.

rgunn4 · 12-08-2006, 08:06 PM

Original post has been updated.

cupofnoodles · 12-08-2006, 08:15 PM

interested in 27, are the parts for pre2k cockers?

-v

DarkArmorPB · 12-08-2006, 09:45 PM

11. P-STOCK: Rare and very comfortable: $20
34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all

If Dave hasnt picked it up. Paypal with shipping to 63368?

Rap4paintball · 12-09-2006, 12:58 AM

Maybe interested in #27 if cupofnoodles doesnt take it and #34 as well. Does #27 come with a cup seal? Also will it fit 2K+ Cockers. Would you take $15 shipped for #34 alone or $30 shipped for #27 and #34 together? Thanks.

scottieb · 12-09-2006, 09:54 AM

if #11 still exists, then i want it. thank you . . ..

rgunn4 · 12-09-2006, 11:45 AM

cupofnoodles: 80% sure the parts are for 2k+ cockers cause the pack came with a newer cocker I bought.

DarkArmorPB: The cocking rod was sold so I can do $34 shipped for #11 and #34. You have first dibs on both of those so please pm me or just send the money to Paypal: rgunn4@hotmail.com

Rap4paintball: If the other guys don't take those parts then I'll let you know.

scottieb: If DarkArmorPB doesn't take it then I'll pm you back. Thanks.

12-01-2006, 09:57 PM	#1 (permalink)
rgunn4 Newbie Join Date: Aug 2006 Posts: 24	F/S/T Gear, Valves, Bodies, Tanks, Hoppers, Devilmag, And More Rules: Be mature, feel free to ask questions, I don’t ship first if you are buying something, but might ship first if we trade, I also take paypal. All prices DO NOT include shipping. Shipping will be between $3-$10. - ALL PRICES ARE BEST OFFER. - PLEASE READ EVERYTHING BEFORE YOU ASK A QUESTION - THERE IS A $10 MINIMUM TO BUY FROM ME. I just don’t like taking the time to ship out something I sell for $3. - Discount if you buy 3 items or more. - More pictures available at the bottom link. - I have tons of feedback at the link below. Thank you and God Bless. 1. EGO FEEDNECK: Used for the vert minimag body. Would like to keep together, but I might part with it: $15 2. SPYDER VERT FEEDNECK: Backup to the Ego feedneck and works just fine: $5 3. VERT FEED MINIMAG BODY: Cut and powder coated by LUKE and just needs a small spacer in the back to fill the gap between the valve and rail: $40 4. SOLD 5. SOLD Picture of above parts put together: http://www.pbase.com/rgunn4/image/67749533.jpg http://www.pbase.com/rgunn4/image/67749534.jpg 6. POWDER COATED STANDARD FEED BODY: Done by LUKE and looks great: $20 7. SOLD 8. SINGLE TRIGGER FRAME: Basic trigger frame with safety: $10 9. RT RAIL: Little to no scratches. Can come with sear, pin and foregrip extension: $25 10. SOLD 11. P-STOCK: Rare and very comfortable: $20 12. GAS THROUGH: Came off a REX II cocker: $20 13. GAS THROUGH EXTENSION: Lets you extend your gas through or reg. Few scratches: $15 14. TIPPMANN TO SPYDER BARREL ADAPTER: Pretty sure it’s for the 98, but it threaded into my 98C just fine: $10 15. ANGLE FEEDNECKS: 2 ULE body feednecks, 1 no name, and 1 Cobra mid-rise: $5each - the blue ULE feedneck is SOLD 16. MAG SEARS AND PARTS: 3 sears w/ bottoms, 1 sear w/o bottom, 2 springs, emag on/off, and 2 sear pins. Little to no wear on most: Sears-$10each, On/Off-$15, Pins-$2each (1 sears and pins are sold) 17. LVL10 BOLT: Comes with spacers, shims and orings, but no power-tube tip: $20 18. TUMB SCREWS: 1 screws with little wear from use: $8 (one already sold) 19. WARP POWERFEED PLUG: Lets you use a warp feed on a powerfeed body: SOLD 20. SOLD 21. SOLD 22. RT FORGRIP EXTIONSION: Might have some screws for it too. Comes with RT rail: FREE w/ RT Rail 23. SOLD 24. PMI EXPANSION CHAMBER: Works great: $10 25. TIPPMANN EXPANSION CHAMBER: Works great: $10 26. LUKE WARP ARM: Free if you have a warp and buy something else: Free 27. COCKER PARTS KIT: Has tons of orings, springs, ect. Also has a valve tool: $20 28. NEW IN BOX AUTOMAG PARTS KIT: Bought from Tunaman, but never used it: $25 29. COCKER 14” SP BARREL: $20 30. COCKER 14” .693 BARREL: $15 31. AUTOMAG 14” CENTERFEED CERAMIC BARREL: $25 - $10 with vert body 32. AUTOMAG 12” POWERFEED SP BARREL: $20 33. AUTOMAG 12” CENTERFEED DYE EXCEL BARREL: $25 - $10 with vert body 34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all 35. 12oz CO2 TANK W/ SQUEEGIE HOLDER: It’s in date and holds air: $15 36. 68/3000 ACI TANK: In date, comes with cover, but leaks a little out the pin which doesn’t matter when you have it on a gun: $80 37. SOLD 38. EMPIRE HALO BLACK SHELLS: Shells only, non-sanded and no lid: SOLD 39. 20oz CO2 TANK W/ REDZ TANK COVER: $10 40. SOLD 41. SOLD 42. CO2 BUTT PLATE: $5 43. SOLD 44. SOLD 45. SOLD 46. ULE AM RAIL: Powdercoated and milled by LUKE: $30 obo 47. SOLD 48. VERT ASA: $15obo or $5 with ULE Rail 49. PMI GAS THROUGH: $10 50. SOLD 51. SOLD MORE PICTURES HERE: http://www.pbase.com/rgunn4/1106_gear MORE STUFF FOR SALE HERE: http://www.automags.org/forums/showt...17#post2262017 TRADE OPTIONS: - NEW MINI PAINTBALL GUN - STIFFI COCKER BARRELS - PC BASED MP3 PLAYER (ZUNE, CREATIVE, ect) - VIDEO EQUIPMENT - DIGITAL CAMERA - SINGLE TRIGGER SHOE - CP REG - COCKER BOLT - CP DIRECT MOUNT ASA - SMALL HOPPER - COMPUTER GEAR (Nice video card, HD, ect.) Last edited by rgunn4; 12-08-2006 at 08:06 PM.

12-01-2006, 10:59 PM	#3 (permalink)
B Retro grouch Join Date: Mar 2006 Location: Lynn, Ma Posts: 2,955	Please edit the sale text there is no need for all caps and or random caps. This is a mature forum please act accordingly, this includes reading the rules too. All sales must be posted here not linked too please edit the post to reflect this rule. __________________ Paintball is a game of honor, play it that way! Nelson Owners Group RIP Grifyn

12-08-2006, 09:45 PM	#7 (permalink)
DarkArmorPB VampiresTasteLikeChicken Join Date: May 2006 Location: St Louis area Posts: 859	11. P-STOCK: Rare and very comfortable: $20 34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all If Dave hasnt picked it up. Paypal with shipping to 63368? __________________ How They Make Paintballs. Total Greif Xtreme Paintball park / Milstadt Il. MCBrown Feedback PBNation Feedback

12-09-2006, 12:58 AM	#8 (permalink)
Rap4paintball MCB Member Join Date: Jun 2006 Location: Ohio Posts: 587	Maybe interested in #27 if cupofnoodles doesnt take it and #34 as well. Does #27 come with a cup seal? Also will it fit 2K+ Cockers. Would you take $15 shipped for #34 alone or $30 shipped for #27 and #34 together? Thanks. __________________ My Feedback Am I really a dealer you ask? Verification Link: http://www.rap4.com/dealers/dealerde...dealers_id=416

12-09-2006, 09:54 AM	#9 (permalink)
scottieb class clown Join Date: Aug 2006 Posts: 655	if #11 still exists, then i want it. thank you . . .. __________________ constantly looking for a predator cocker. my feedback

12-01-2006, 10:18 PM	#2 (permalink)
oldschooldave MCB Member Join Date: Jul 2006 Posts: 127	i would like to get 15. ANGLE FEEDNECKS: 2 ULE body feednecks, 1 no name, and 1 Cobra mid-rise: $5each the blue one 26. LUKE WARP ARM: Free if you have a warp and buy something else: FREE 34. COCKER PARTS: 2 Beaver tails, back block, cocking rod and extras (not pictured): $15 for all thanks , dave

12-01-2006, 11:36 PM	#4 (permalink)
rgunn4 Newbie Join Date: Aug 2006 Posts: 24	I'm very familiar with the rules cause I've been on mcarterbrown.com for a long time. I re-read the rules and I saw nothing regarding caps within the thread. I did it to help the title of the object for sale to stand out. If that is wrong then let me know and I'll make the changes. As for the link I'll take it out, but my understanding of the link rule is that you can't simple post a link to another thread or forum. My link is just to another forum with the same items for sale for the most part. The other link is for more pictures. I'd be willing to make changes as needed if I'm breaking any rules. Thanks.

12-08-2006, 08:06 PM	#5 (permalink)
rgunn4 Newbie Join Date: Aug 2006 Posts: 24	Original post has been updated.

12-08-2006, 08:15 PM	#6 (permalink)
cupofnoodles Active Member Join Date: Sep 2006 Location: socal Posts: 334	interested in 27, are the parts for pre2k cockers? -v

12-09-2006, 11:45 AM	#10 (permalink)
rgunn4 Newbie Join Date: Aug 2006 Posts: 24	cupofnoodles: 80% sure the parts are for 2k+ cockers cause the pack came with a newer cocker I bought. DarkArmorPB: The cocking rod was sold so I can do $34 shipped for #11 and #34. You have first dibs on both of those so please pm me or just send the money to Paypal: rgunn4@hotmail.com Rap4paintball: If the other guys don't take those parts then I'll let you know. scottieb: If DarkArmorPB doesn't take it then I'll pm you back. Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search