Buy, Sell, Trade

[idkfa]

I need to clear the bench again. All prices are in USD and shipping will be determined on a case by case basis (should not be more than a few dollars for parts, $10-15 for markers). I ship to the US and Canada and I can get to the PO every few days. I accept Paypal from everyone and MOs from Premium Members. I have disclosed everything I know about each item.

This is a bit picture intensive, I hope it is organized okay. Links to photos are below each item listing.

I would prefer to only head to the PO for orders of $25 or more, but we can talk.




ACI Griffin Halfblock Project

This is a great little Spyder-clone and it has one of the nicest triggers on an STBB I have used. Very nice build quality as well. It is currently chronoing around 270 fps. It will come with everything pictured. The SS hose was recently installed using loctite. A slight leak developed during testing, but I am sure anyone with any knowledge of STBBs could fix it easily. The leak is very small and is down the barrel. Shoots very nice. The halflbock is rather nicely done, it could use cleaning up with a sanding block or dremel and some paint. Comes with what looks to be a stock barrel.

$50 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3231.jpg

http://img.photobucket.com/albums/v2...h/IMG_3235.jpg

--------------------------------------------------------

E-Spyder Project

This is most of an Electra, with some other parts. The red e-frame seems to be complete minus battery hookup. The Electra is missing the parts from the rear of the bottom tube (hammer, spring, back cap, etc.) but the valve is included. It will come with a new APP Hittmann delrin bolt. Comes with a second front block and gas through grip. The Electra frame works intermittently, the solenoid seems to work. This is also halfblocked, with some amateur dremel "milling". Comes with pictured barrel.

$50 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3238.jpg

http://img.photobucket.com/albums/v2...h/IMG_3240.jpg

http://img.photobucket.com/albums/v2...h/IMG_3257.jpg

--------------------------------------------------------

Evil Omen SOLD

Nice marker, in almost perfect shape. I put about 500 paintballs through it in the backyard and the original owner used it a few times. Will come with Evil Detonator regulator and stock rail mount. This was shooting great the last time it was fully together but the buyer should be prepared to learn the ropes of tuning an Omen.

$50 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3262.jpg

--------------------------------------------------------


Spyder Parts Lot

A bunch of Spyder parts. First frame is a stock double trigger Classic frame (no trigger guard has been cut) with sear and spring. Second is a Classic single trigger. Third is a dremeled double trigger, could be cleaned up more. Also comes with an ~8 inch unported barrel, angled duckbill ASA, a 45 frame block, and a drop forward with Spyder patter holes.

$30 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3267.jpg

--------------------------------------------------------

CCM 86° Phantom Frame SOLD

BRAND NEW. Dust black w/ delrin panels. Original owner said it was a prototype with a different panel design (I can't notice any difference between this and other CCM frames).

$40 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3242.jpg

--------------------------------------------------------


CCM Doorgunners (set of 2)

BRAND NEW. Pretty much self explanatory.

$20 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3249.jpg

--------------------------------------------------------


Spyder frame adapter

NIB, allows you to go from Spyder thread pattern to industry standard.

$10 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3247.jpg

--------------------------------------------------------


3000 psi Myth HPA tank regulator PENDING

BRAND NEW. Has fill nipple protector.

$20 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3241.jpg

--------------------------------------------------------


Grip Lot

Angel grips, brown plastic panels, original Dye stickies in decent shape

$15 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3243.jpg

--------------------------------------------------------


CCM Lower Tube Internal Kit SOLD

BRAND NEW, seems to be complete.

$40 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3250.jpg

--------------------------------------------------------


ACI Maverick/Trracer Barrel SOLD

Good condition with a few scuffs, is about 2" longer than stock, around 12" long.

$15 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3263.jpg

--------------------------------------------------------


Tank Relocation Device

Apparently was to allow larger tanks to be mounted under the barrel of VM68s. Not sure if it holds air, but looks to be in good condition. Will swivel to some degree.

$15 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3260.jpg

--------------------------------------------------------

Spyder Classic expansion chamber

Great condition, a few minor scuffs. The fitting hole has no threading, seems to be for a press fit w/ set screw fitting.

$10 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3259.jpg

NEWLY ADDED JUNE 24, 2009

BOA Snakebite - Twistlock SOLD

This is a beautiful barrel, one of my favourites (I just don't have a twist lock Mag right now). It shoots great and is rather light for being a nickel plated (?) brass piece. Teflon coating has been removed forward of the ridge but the coating behind is flawless. Comes with both o-rings and a wire nubbin.

$45 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3278.jpg

--------------------------------------------------------

Freak Kit

This is a nice collection of Freak tips and a couple of inserts. The tips look like a 10", 12" and a 14" (shortest looking like a Progressive tip, other two are AA). The inserts are 0.691 and 0.693. All in great shape with few or no marks. Comes with the pictured case.

$50 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3273.jpg

--------------------------------------------------------

SS Automag Body - Hopper Left/Powerfeed Right PENDING

Nice but well used. I chopped off the excess feed tube to make the hopper lower and more centered. I think I did a good job, if I say so myself. Will come with powerfeed plug. Rental numbers are very lightly scratched into the hopper side but a light buffing should be able to take them out (they are barely visible, I could not even really photograph them).

$25 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3279.jpg

http://img.photobucket.com/albums/v2...h/IMG_3281.jpg

--------------------------------------------------------

Phantom Bobbed Valve

Twinky did this a while ago, works great. You will be responsible for plugging the hole or installing a gauge. No internals included.

$30 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3266.jpg

NEWLY ADDED JUNE 27, 2009


JT USA Stainless Steel Barrel - Cocker Threaded

This is a nice SS barrel, has a JT USA sticker on it. I am not sure when exactly they made barrels. This is in basically perfect shape, there are a few "bright" spots near the tip (they are not nicks, it looks more polished than the rest). Looks to be 10".

$20 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3300.jpg

http://img.photobucket.com/albums/v2...h/IMG_3301.jpg

--------------------------------------------------------

Viewloader VLocity Hopper

I bought this from someone who only used it a few times and I used it twice since buying it. In great shape, with a few nicks/scuffs here and there. Stock board and parts. I can include some foam for the battery compartment if the buyer wants it (no charge of course).

$45 + shipping

http://img.photobucket.com/albums/v2...h/IMG_3304.jpg

http://img.photobucket.com/albums/v2...h/IMG_3306.jpg

http://img.photobucket.com/albums/v2...h/IMG_3307.jpg



--------------------------------------------------------

[jcurt455]

intrested in any trades on the freak stuff. If not would you part the blue teardrop.

[Weltz4u]

PM me with the price + shipping cost on the Myth Reg

[MrFancyPants]

I'll take this

CCM Lower Tube Internal Kit

BRAND NEW, seems to be complete.

$40 + shipping

[idkfa]

Replied to both. Thanks.

[idkfa]

More items added.

All previously sold items are packed up and I am heading to the PO in an hour or so.

[idkfa]

All items paid for as of yesterday night have been shipped. I will be going to the PO for the next batch on Wednesday. Thanks!

[idkfa]

Upwards. Willing to accept any reasonable offer. If it is overpriced at all, PM me.

[idkfa]

UP!