Kodiak's Enhanced QLoader SS1

Kodiak · 02-05-2008, 12:37 AM

Qloader SS1 Factory Specs
CNC aluminum body
Tippmann A5 internals
Tippmann 98 hammer and cocking handle
Two step top rail
Upgradeable, easily removable firing chamber with shroud threading
A5 grip and trigger assembly
A5 rear plug
Will accept all Tippmann A5 grip, trigger, internals, and buttstock upgrades
Direct bottom feed qloader

My enhancements
A5 E-grip w/APE Rampage Board
Lapco Bigshot 14"
Lapco Grip Plug
SpecOps T2W Stock
AR-15 Tri-Rail
BSA Reflex Sight
Surefire G2
Generic Gas Thru

pizzaluvr · 02-05-2008, 01:06 AM

That looks great! You played with it yet?

hockeytown · 02-05-2008, 05:43 PM

Very nice!
Let us know how things go.

olinar · 02-05-2008, 06:10 PM

I havent seen one of these in person but it looks like there could have been a better placement on the q loader.

Im thinking the q should be lowered about 4 inches and a hose could be put in that comes with a q kit. Then have the actual hose routed through some sort of foregrip that is hollow inside. This would allow the q loader to be able to face the other way and would move the center of gravity further back.
I guess you could skip the hose altogether and just use the tubing/foregrip.

I would try this myself if i had one but ive no need for another milsim marker...

secretweaponevan · 02-10-2008, 04:40 AM

Quote:

Originally Posted by olinar

I havent seen one of these in person but it looks like there could have been a better placement on the q loader.

Im thinking the q should be lowered about 4 inches and a hose could be put in that comes with a q kit. Then have the actual hose routed through some sort of foregrip that is hollow inside. This would allow the q loader to be able to face the other way and would move the center of gravity further back.
I guess you could skip the hose altogether and just use the tubing/foregrip.

Very good idea.

Plus you could theoretically reload while the marker was shouldered.

tmart747 · 03-28-2008, 01:58 AM

I like how it feeds directly with no hose. I have always had problems with balls breaking when I use the feed hose supplied with the q loader kits. If the hose is emty the balls break some times when reloading because of the extra space vs. direct feed.

xkpxfatassxx · 03-28-2008, 02:02 AM

That is truly amazing. I wish I had the talent to make something like that.

pizzaluvr · 03-28-2008, 02:05 AM

Quote:

Originally Posted by xkpxfatassxx

That is truly amazing. I wish I had the talent to make something like that.

I believe qloader marketed and sold that.. His enhancements are listed under "My Enhancements".

Did we really need to bump this thread?

MeÐiC · 03-28-2008, 10:19 AM

Quote:

Originally Posted by pizzaluvr

Did we really need to bump this thread?

Sure why not???

02-05-2008, 12:37 AM	#1 (permalink)
Kodiak Newbie Join Date: Jul 2006 Location: Colorado Springs, CO Posts: 21	Kodiak's Enhanced QLoader SS1 Qloader SS1 Factory Specs CNC aluminum body Tippmann A5 internals Tippmann 98 hammer and cocking handle Two step top rail Upgradeable, easily removable firing chamber with shroud threading A5 grip and trigger assembly A5 rear plug Will accept all Tippmann A5 grip, trigger, internals, and buttstock upgrades Direct bottom feed qloader My enhancements A5 E-grip w/APE Rampage Board Lapco Bigshot 14" Lapco Grip Plug SpecOps T2W Stock AR-15 Tri-Rail BSA Reflex Sight Surefire G2 Generic Gas Thru __________________ Dirt Hogs Paintball Team Generously Sponsored by QLoader\|Jasse Paintball\|DMC Paintball Advanced Paintball Electronics\|The Underground Mod Shop\|Save Phace

03-28-2008, 02:02 AM	#7 (permalink)
xkpxfatassxx Post Whore Join Date: Feb 2007 Location: So Cal Posts: 1,034	That is truly amazing. I wish I had the talent to make something like that. __________________ Winchesters 50rnd Hoppers $4 3.5 tanks w/ valve $23 Dealer for: CCM, CCI, CP, and other misc companies. Purchase here:Snap Paintball I am not the owner of snappb. I'm now in a bigger pickle. Should I get Hurtcow's kp3 or someone else's kp2 or another kp2? All have their own uniqueness.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-05-2008, 05:43 PM	#3 (permalink)
hockeytown Never Forget Join Date: Jul 2007 Location: Michigan Posts: 821	Very nice! Let us know how things go.

02-05-2008, 06:10 PM	#4 (permalink)
olinar Active Member Join Date: Feb 2007 Posts: 167	I havent seen one of these in person but it looks like there could have been a better placement on the q loader. Im thinking the q should be lowered about 4 inches and a hose could be put in that comes with a q kit. Then have the actual hose routed through some sort of foregrip that is hollow inside. This would allow the q loader to be able to face the other way and would move the center of gravity further back. I guess you could skip the hose altogether and just use the tubing/foregrip. I would try this myself if i had one but ive no need for another milsim marker...

03-28-2008, 01:58 AM	#6 (permalink)
tmart747 Newbie Join Date: Mar 2008 Location: Great NW Posts: 7	I like how it feeds directly with no hose. I have always had problems with balls breaking when I use the feed hose supplied with the q loader kits. If the hose is emty the balls break some times when reloading because of the extra space vs. direct feed.