Paintball

[pinkanese]

Originally Posted by russc

You have a 2k+ cocker?

Buy a maddmann spring kit, use the sear spring as a valve spring, green as main spring. Set valve pressure just slightly above the sweetspot, and bam, it's on.

BAM - It's ON

So all of my Snipers are pre-2k. I know the madmann sear spring is notoriously light. So if I have a high flowing valve should I got for a light valve spring and heavier main? Eliminating farting is my only goal here.

[russc]

you shouldn't need a heavy main. I had to crank my pressure past the sweet spot to bring velocity back down while using sear valve and blue main. I don't get any farting whatsoever.

[splattttttt]

Originally Posted by russc

you shouldn't need a heavy main. I had to crank my pressure past the sweet spot to bring velocity back down while using sear valve and blue main. I don't get any farting whatsoever.

bold to make sure people got what you so modestly mentioned. "Over the sweet spot".