Aci Maverick

young__wun1515 · 10-08-2007, 08:16 PM

I have just purchased an Aci maverick, and i do not like the positioning of the tank. Currently, everything is stock with a 9oz tank. I wear profilers, and with the wide mask, its hard to aim. I am looking at converting it to bottom line but i need to do it relatively cheap. Can anyone give me a guide and/or list of parts i need to buy and maybe a price quote. Thanks.

going_home · 10-08-2007, 08:33 PM

Bulldog seems to sell them and has parts kits.
Maybe if you contact them they will have what you need ?

ACI Sports Maverick Pump Paintball Marker ACI Sports Maverick Pump Paintball Marker - $80.00 : Bulldog Paintball, Play with the Big Dogs

Ir0nExpress · 10-08-2007, 08:35 PM

A.T. Systems

Check under accessories, there's a bottomline kit for the Eurogrip on a stock maverick. Otherwise, get a 45 grip for a phantom and use that instead.

young__wun1515 · 10-08-2007, 09:04 PM

Thanks a lot for the quick replies, and thanks for the help. That website helped and I am going to buy the bottom line kit for it. Thanks.

young__wun1515 · 10-19-2007, 06:19 PM

Is there another store that sells brand new, ACI maverick adjustable bolts?

ljpiller · 10-19-2007, 08:13 PM

Bacci's Graduation Sale has a wide selection of bore drop bolts. #24 looks like a nice one. Whatever you get, make sure its a "bore" drop adjustable bolt for nelsons.

Other than that, I'm not sure of where you can get any, sorry

kidneythief · 10-21-2007, 05:33 AM

The bolt/hammer is specific to Tracer/mavericks. The powertube is basically part of the hammer...so the bolt would have to be traccer/mav specific. Before you go searching for a new bolt yours may indeed be a velocity adjustable one...take it out and see if there is a brass insert int he bolt.

I would recommend getting a 45 block and ditch the euro. Then just run a asa to 1/8 npt reducer to a hose down to a duck bill asa attached to the grip block. You can get them through CCI.

-Jake

10-08-2007, 08:16 PM	#1 (permalink)
young__wun1515 Rec Poster Join Date: Jul 2007	Aci Maverick I have just purchased an Aci maverick, and i do not like the positioning of the tank. Currently, everything is stock with a 9oz tank. I wear profilers, and with the wide mask, its hard to aim. I am looking at converting it to bottom line but i need to do it relatively cheap. Can anyone give me a guide and/or list of parts i need to buy and maybe a price quote. Thanks.

10-08-2007, 08:33 PM	#2 (permalink)
going_home Hebrews 13:8 Join Date: May 2007 Location: Valrico Florida	Bulldog Bulldog seems to sell them and has parts kits. Maybe if you contact them they will have what you need ? ACI Sports Maverick Pump Paintball Marker ACI Sports Maverick Pump Paintball Marker - $80.00 : Bulldog Paintball, Play with the Big Dogs __________________ Say what you mean. Mean what you say. http://www.liveprayer.com/fitna.cfm

10-08-2007, 08:35 PM	#3 (permalink)
Ir0nExpress Why am I here...? Join Date: Apr 2006 Location: Staten Island/Stony Brook New York	A.T. Systems Check under accessories, there's a bottomline kit for the Eurogrip on a stock maverick. Otherwise, get a 45 grip for a phantom and use that instead. __________________ President of the SUNY Stony Brook Paintball Club. Pbreview Feedback MCarterBrown Feedback Automags.org Feedback

10-19-2007, 08:13 PM	#6 (permalink)
ljpiller Active Member Join Date: Jun 2007	Bacci's Graduation Sale has a wide selection of bore drop bolts. #24 looks like a nice one. Whatever you get, make sure its a "bore" drop adjustable bolt for nelsons. Other than that, I'm not sure of where you can get any, sorry __________________ "I've never lost a single game of paintball because I've always had the most fun."

10-21-2007, 05:33 AM	#7 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!!	The bolt/hammer is specific to Tracer/mavericks. The powertube is basically part of the hammer...so the bolt would have to be traccer/mav specific. Before you go searching for a new bolt yours may indeed be a velocity adjustable one...take it out and see if there is a brass insert int he bolt. I would recommend getting a 45 block and ditch the euro. Then just run a asa to 1/8 npt reducer to a hose down to a duck bill asa attached to the grip block. You can get them through CCI. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) MCB Moderator Kidney Machine

10-08-2007, 09:04 PM	#4 (permalink)
young__wun1515 Rec Poster Join Date: Jul 2007	Thanks a lot for the quick replies, and thanks for the help. That website helped and I am going to buy the bottom line kit for it. Thanks.

10-19-2007, 06:19 PM	#5 (permalink)
young__wun1515 Rec Poster Join Date: Jul 2007	Is there another store that sells brand new, ACI maverick adjustable bolts?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search