| TM-11-A Pump tech help
hey, i have recently acquired a rather worn, but working TM-11-A pump, and now the trigger return spring has broken off.....agh. anyone know how to take the trigger system apart? ive only gotten the internals out, which consists of the bolt, hammer, spring, from the front, and the valve and power tube assembly from the back, the body is stamped steel and appears to be permantly attached to the plastic trigger frame somehow.... is there any way to take this frame off so i can get to the trigger return spring? i can see it behind the trigger itself, seems to be positioned so that it basically pulls the trigger down and forward, unlike the other springs ive seen, which essentially pushes the trigger up and forward in front of the trigger. am i going to have to drive the pins out and get a different spring and attach it to the trigger then press the pins in? | 
04-05-2007, 03:54 PM
