mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Paintball News (http://www.mcarterbrown.com/forums/paintball-news/)
-   -   Planet Eclipse CSL: Picture/Specs (http://www.mcarterbrown.com/forums/paintball-news/161677-planet-eclipse-csl-picture-specs.html)

jdlarson11 05-12-2011 01:22 PM

Planet Eclipse CSL: Picture/Specs
 
http://i259.photobucket.com/albums/h...estige_800.jpg

http://i.ebayimg.com/00/$(KGrHqEOKiE...(bU1KQ~~_3.JPG

http://i259.photobucket.com/albums/h...Spekta_800.jpg

Note the .681 bore


Quote:

ECLIPSE CSL EGO

“Enriched with Carbon and Gold, the CSL is both striking and beautiful. From the seamless flow of the barrel and frame to the intricate detail and craftsmanship of the body. The new CSL is the epitome of class and performance with a distinctive pedigree and history that is only found in the SL mark”…

The CSL is all about the detail. Gold screws clamp the gold-detailed grips onto the new flush fitting and screwless frame. Gold Thumbwheel and Screw on the silky smooth, bushed and re-designed C-Lever Clamping Feed. Gold LPR Torpedo and Bolt Pin. The bespoke CSL POPS system with coded gold latch pin. All co-ordinated with that lustrous carbon fibre and gold threaded weave in the all-new SL Shaft 4 Barrel Tip.

The SL has always offered something a bit special. A bit “extra”, if you like. And this year is no exception.

The gold accenting lifts the general appearance of the CSL into another league. All of the stainless steel parts that could be colour-coded have been, also the grip badge and body badge carry a gold chrome finish in place of the silver chrome found on the standard Ego11.

But of course it is the new SL Shaft4 Barrel that takes the limelight. The gloss finished Carbon Fibre 14.5” and 16” tips contains a delicate gold weave, a polished gold collar, and ample porting. The backs have been stepped down a size in their range (now 0.681”, 0.685” and 0.689” bores) in order to better suit the current paint sizes around the globe. The threading and rear section use the same geometry as the Shaft4 Barrel with its increased control bore length, offering higher average velocity and improved consistency over the older Shaft SL barrels. Of course the internal bore is precision honed, as you would expect.

In order to make the most of the stunning detailing all of the CSL the colours for this year have been designed to complement the gold theme, picking up the colour in their accented parts, but each with their own unique combination of base and contrasting elements.

Mechanically the CSL is driven using the same solenoid with integrated Flow Control Devices as can be found on the Ego11. The Ego11 has altered perceptions on what is possible both in terms of adjustability and outright smoothness from a poppet platform. And the CSL is no different with the adjustable solenoid making it possible to dial in the marker for supreme spool valve rivalling smoothness or outright firepower at the twist of a control.

But in other areas around the marker it’s easy to spot where those improvements that you expect to see in an SL have been made. For example the F-F or Flush Fitting Frame. Take a look and you will see that there are no longer any unsightly screw heads at the rear of the frame or inside the trigger guard. Instead, the frame is attached using a single captured free-spinning screw at the rear, and on a discrete and hidden cam-hinge at the front. The result is quicker and easier disassembly, smoother lines and improved ergonomics.

The CSL will be shipping with the excellent Cure3+ bolt. But currently in the final stages of development we have an all-new Cure4 Bolt System. Developed with the intention to reduced stack clipping and bolt strike (where the paintball is damaged by the bolt accelerating forward and striking the stationary paintball) the new bolt includes a removable and replaceable cushioned tip. The tip is locked into position by the contoured bolt insert that is in turn held in place by the bolt pin. Complete disassembly requires no tools whatsoever. The Cure4 bolt will be made available free of charge to all CSL owners who register their marker (see inside CSL box for details).

Continuing the long tradition of the SL range, the CSL offers a multitude of options to the owner. Electronically there is the same option of Opto or Micro trigger actuation on the board, as well as magnetic and/or spring return on the trigger. The CSL also offers the option of both a High and Low Pressure exhaust valve system which allows you tailor the efficiency and feel even further. The HP valve guide gives increased efficiency while the LP guide delivers a more gentle blast of air to the back of the ball. There is also the inclusion of the standard Ego-shaped “S” style, as well as a brand new retro “Blade”-shaped, trigger. The options included as standard with every CSL mean that there should be a set-up to suit every taste without ever the need to purchase potentially flawed aftermarket parts.

And of course these days the options do not just stop at the hardware. Every CSL comes complete with a full E-Portal system, including software and link cables meaning that everything from the start-up splash screen to the software version can be adjusted and uploaded from a PC.

As you can see, there is little that has been left untouched on the New CSL. And after all, The devil is in the detail, as they say…

UNIQUE CSL FEATURES:

Bespoke CSL Body
Bespoke CSL F-F (Flush Fitting) Trigger Frame

Bespoke CSL Cure4 Soft Faced Bolt With Gold Bolt Pin

Bespoke CSL 5-Piece SL Shaft4 Shaft Barrel Kit

Bespoke CSL Carbon Fibre Tips With Gold Weave

Bespoke CSL Contoured dual density Grips with Gold Logo

Bespoke CSL Gold Hardware

Bespoke CSL Circuit Board With USB Interface – Cable and Software Included

Bespoke CSL Dual Triggers – “Blade” and “S” Style Triggers Included

Bespoke CSL Dual Valve Guides – HP and LP Valve Guide Kit

Bespoke CSL Zick2 Rammer Kit

Bespoke CSL POPS Assembly

Bespoke CSL Smooth Clamping Feed Assembly – With Gold Sprocket Wheel

Bespoke CSL Contoured Eye Covers

Lazer-Eyes Red BBSS System

Exclusive PBNation CSL Badge

EGO11 CROSS OVER FEATURES:

Bespoke MAC Solenoid with Adjustable Flow Controls

Fully Adjustable Bolt and Rammer Speed for reduced Kick

SL3 Inline Regulator With Angled Swivel

Dual Density Rubber Console and Frame Grip

Cure3+ Bolt

Zick2 Rammer Shaft and Cap

Increase Longevity of Internal Components

New LP Supply Protection System

92% larger transflective LCD Display

Adjustable Tru-Colour RGB LCD Backlite

16-Bit Microprocessor – 16 MIPS (Million Instructions Per Second)

Improved Solenoid Drive Circuitry for increased Velocity Consistency

New Graphical User Interface

Ultra-Lightweight Monoform Body

Deftek Offset Feed Tube

Integrated Rammer Housing

Integrated FRM

Offset Bores

Micro + Opto Switch Board

Dual Instrument Grade Ball-Raced Trigger

Dual Trigger Return Mechanisms – Magnetic and Spring Trigger

T-Slot Rail Mounting System

Integrated Audible Sounding Device

LAUNCH COLOURS

Panther, Spekta, Prestige

WEIGHTS AND MEASURES

Length: 540 mm

Height: 211 mm

Width: 31 mm

Weight: 828g/1.82lb

All Measurements include Barrel (14.5”), POPS, Battery, Ready-to-go:

SL SHAFT 4 BARREL KIT SPECIFICATIONS

1 x 14.5” Carbon Fibre Front Section 0.700” Bore

1 x 16” Carbon Fibre Front Section 0.700” Bore

1 x Rear Section – 0.681” Bore

1 x Rear Section – 0.685” Bore

1 x Rear Section – 0.689” Bore

desertT1 05-12-2011 01:26 PM

I'm curious about the frame, but that's about it.

Sarge 05-12-2011 01:58 PM

It's kinda easy on the eyes.

Cowboy 05-12-2011 02:10 PM

i can just hear it now

(goldmember voice) "I love goollllllddd,the look, the taste, the smell, the texture"

jdlarson11 05-12-2011 03:00 PM

3rd color added. I'm loving the bore size .681

Chubs 05-12-2011 03:21 PM

Quote:

Originally Posted by jdlarson11 (Post 1828963)
3rd color added. I'm loving the bore size .681

Finally, big companies are understanding the reduction in paint size!

Anyways, I like it. Very sexy.

jdlarson11 05-12-2011 03:23 PM

It almost looks like they designed this gun for Joy Division judging from the grips and the colors...am I the only one thinking the samething?

alpha434 05-12-2011 03:51 PM

... So lavishly appointed, there are virtually NO options!...

http://www.youtube.com/watch?v=kWF-hH1nloo


They can use this song for the background in Eclipse's commercial:

http://www.youtube.com/watch?v=eHuebHTD-lY

Daze 05-12-2011 04:11 PM

It's about time they put a foamie on that bolt.

I would hate to see the price tag, but I do have to say that other than the "screwless" grips, it's pretty neat. Even neater if you get both triggers and HP/LP parts in the box to figure out which one you like. Not a big fan of the gold, but I understand the reasoning.

I do wish we could find a way to make barrel kits without the giant bulge in the middle though.

jdlarson11 05-12-2011 04:19 PM

price is $1849


All times are GMT -4. The time now is 10:29 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC