I cant find it on the PPS site.

Chemical-X · 02-15-2007, 11:38 PM

I didnt see the pricing for KP accessories on the PPS site. What is an approximate price for a spring feed on a KP series rifle?

Thank you
Ben

Allfat · 02-16-2007, 01:26 AM

You could always call them. I am sure they would be happy to help you out.

ringer706 · 02-16-2007, 01:49 AM

This help?

PsychoBaller · 02-16-2007, 02:04 AM

Spring Feed Conversion for a stock KP with existing tube (kp2-sc) is $60.00

(just checked the receipt from my KP Palmerization from 2yrs ago).

Chemical-X · 02-16-2007, 02:25 AM

Very good, that gives me an approximate idea.

I just finalized my order with PPS reguarding my KP2.

Its pretty much paid off already, I am having the followong done to the rifle.

Rebarreled and stock feed with spring added.
New pump handle
Velocity adjuster
Performance tune
Nickle plated.

I cant wait to get this rifle back.

I took the above pictures after I unpacked and wiped it down from the Ebay sale.

Next are pics from when I started on the stock.

It had one chemical bath prior to this picture, The varnish remover didnt work too well so I decided to sand it down.

And here are the pictures from a few minutes ago.

I am still leaning towards having the stock duracoated.

Frontier_Bill · 02-16-2007, 02:31 AM

NOooo... don't ruin wood grain with duracoat! Give it something like special walnut or a similar purplish-blackish-really dark stain.

PJ · 02-16-2007, 06:22 PM

Nice cleanup on the stock! I agree, stain and seal it, don't duracoat it.

Chemical-X · 02-16-2007, 08:02 PM

Is this normal for a KP stock to look like?

I would consider trading this stock for another so long as it isnt terribly beaten or cracked/rotted.

PsychoBaller · 02-17-2007, 12:49 AM

Nah man, your stock looks good. If some spots look as if the original color won't sand off, just keep sanding till they are bare. Original stain/color only goes so deep.

02-15-2007, 11:38 PM	#1 (permalink)
Chemical-X Post Whore Join Date: Apr 2006	I cant find it on the PPS site. I didnt see the pricing for KP accessories on the PPS site. What is an approximate price for a spring feed on a KP series rifle? Thank you Ben

02-16-2007, 01:26 AM	#2 (permalink)
Allfat Mech. Engineering Student Join Date: Aug 2006 Location: Portland, OR	You could always call them. I am sure they would be happy to help you out. __________________ Probability is a math law, not an aiming technique.

02-16-2007, 01:49 AM	#3 (permalink)
ringer706 Seasoned Member Join Date: Mar 2006 Location: Hudsonville Michigan	This help? __________________ Feedback She told me we couldn't afford beer anymore and that I'd have to quit drinking. Then I caught her spending $65 on makeup. I asked how come I had to give up stuff and she didn't. She said she needed the makeup to look pretty for me. I told her that was what the beer was for. I don't think she's coming back...

02-16-2007, 02:04 AM	#4 (permalink)
PsychoBaller p8ntd dawurld, an thensum Join Date: Apr 2006 Location: NJ	Spring Feed Conversion for a stock KP with existing tube (kp2-sc) is $60.00 (just checked the receipt from my KP Palmerization from 2yrs ago). __________________ 13th Legionnaires Scenario Team DC Viking #1 - DC Viking #2 - Blazer Project - Phooncane brewing Destructive Customs

02-16-2007, 02:31 AM	#6 (permalink)
Frontier_Bill The Brown Guy! Join Date: Jul 2006 Location: Bozeman, Montana	NOooo... don't ruin wood grain with duracoat! Give it something like special walnut or a similar purplish-blackish-really dark stain. __________________ Danger: Reading online forums may cause irreparable damage to your faith in Humanity. Team Rogue Cell #10 Feedback NO'MAAM #16

02-16-2007, 02:25 AM	#5 (permalink)
Chemical-X Post Whore Join Date: Apr 2006	Very good, that gives me an approximate idea. I just finalized my order with PPS reguarding my KP2. Its pretty much paid off already, I am having the followong done to the rifle. Rebarreled and stock feed with spring added. New pump handle Velocity adjuster Performance tune Nickle plated. I cant wait to get this rifle back. I took the above pictures after I unpacked and wiped it down from the Ebay sale. Next are pics from when I started on the stock. It had one chemical bath prior to this picture, The varnish remover didnt work too well so I decided to sand it down. And here are the pictures from a few minutes ago. I am still leaning towards having the stock duracoated.

02-16-2007, 06:22 PM	#7 (permalink)
PJ Hawaiian-shirted hooligan Join Date: Apr 2006 Location: Powell, TN	Nice cleanup on the stock! I agree, stain and seal it, don't duracoat it. __________________ Paul AIM: PJDarknight CPPA #1145 / PPIG #496 / LPPC #103 / POG #1047 / Team Rogue Cell #7 PJ's Gallery on MCB Feedback on MCB

02-16-2007, 08:02 PM	#8 (permalink)
Chemical-X Post Whore Join Date: Apr 2006	Is this normal for a KP stock to look like? I would consider trading this stock for another so long as it isnt terribly beaten or cracked/rotted.

02-17-2007, 12:49 AM	#9 (permalink)
PsychoBaller p8ntd dawurld, an thensum Join Date: Apr 2006 Location: NJ	Nah man, your stock looks good. If some spots look as if the original color won't sand off, just keep sanding till they are bare. Original stain/color only goes so deep. __________________ 13th Legionnaires Scenario Team DC Viking #1 - DC Viking #2 - Blazer Project - Phooncane brewing Destructive Customs

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search