Cost of wedgits

Fireball · 02-19-2007, 08:24 PM

Don't want to bug PPS with another e-mail, and couldn't find the cost online.

Sooo....anyone want to let me know how much it costs for wedgit install on a cocker barrel?

They can install them on stainless barrels, right?

Cheers,

FB

Uranus · 02-19-2007, 08:48 PM

It should be on the web site, I think 35ish

JeepinCalifornia · 02-19-2007, 08:49 PM

Is it here, under ball detents? Or perhaps somewhere else under--specifically--"Wedgits"?
http://www.palmer-pursuit.com/catalog/UPGRADES.HTM

FeedTheDogg · 02-19-2007, 09:15 PM

I think the part that says Ball detents refers to the sheridan detents that they can install on old sheridans.

Wycke · 02-19-2007, 09:31 PM

On a new brass barrel, wedgits add $15. I know they can do aluminum barrels, and I think that runs about $25, but I've not heard of them wedgiting any stainless barrels. Considering it's a considerably harder material than aluminum, I'd imagine it'll cost more. Best bet is to call the shop.

-Chad

IndustrialHalo · 02-20-2007, 11:31 PM

I believe I've heard of a Dye stainless or Carter stainless with wedgits; I can't help you on cost though, I have no idea.

louie · 03-05-2007, 01:20 AM

If I had a Wedgit installed into my barrel(s), does that mean I can use any bore size for my cockers now since the Wedgit would prevent all rollouts?

Are there any problems associated with Wedgits?

Azzy · 03-05-2007, 08:17 AM

other than gas blowby.. really shouldnt be. I have seen some paint roll past them though.

That, and it isnt reversible if you get some larger paint.

02-19-2007, 08:24 PM	#1 (permalink)
Fireball Active Member Join Date: Sep 2006	Cost of wedgits Don't want to bug PPS with another e-mail, and couldn't find the cost online. Sooo....anyone want to let me know how much it costs for wedgit install on a cocker barrel? They can install them on stainless barrels, right? Cheers, FB

02-19-2007, 08:49 PM	#3 (permalink)
JeepinCalifornia Rec Poster Join Date: Apr 2006 Location: California	Is it here, under ball detents? Or perhaps somewhere else under--specifically--"Wedgits"? http://www.palmer-pursuit.com/catalog/UPGRADES.HTM __________________ JeepinsChainmaille o\|\|\|\|\|o 吉普车! ...never forget!

02-19-2007, 09:31 PM	#5 (permalink)
Wycke Supernatural Anaesthetist Join Date: Apr 2006 Location: The Plaines of Celestia	On a new brass barrel, wedgits add $15. I know they can do aluminum barrels, and I think that runs about $25, but I've not heard of them wedgiting any stainless barrels. Considering it's a considerably harder material than aluminum, I'd imagine it'll cost more. Best bet is to call the shop. -Chad __________________ Porch Monkey 4 Life! s'ok...I'm takin' it back... My Feedback Thread

03-05-2007, 01:20 AM	#7 (permalink)
louie Newbie Join Date: Feb 2007 Location: Niantic, CT	If I had a Wedgit installed into my barrel(s), does that mean I can use any bore size for my cockers now since the Wedgit would prevent all rollouts? Are there any problems associated with Wedgits? __________________ Butchered Jackal RDL Eblade & Vertibrae Autococker ebay, PbNation feedback and Paypal Verified. Buy Compulsive Paintball

03-05-2007, 08:17 AM	#8 (permalink)
Azzy Mod-O-Rator Join Date: Mar 2006 Location: Finleyville, PA	other than gas blowby.. really shouldnt be. I have seen some paint roll past them though. That, and it isnt reversible if you get some larger paint. __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me. I want to take the calculated risk; to dream and to build, to fail and to succeed. I refuse to barter incentive for a dole. I prefer the challenges of life to the guaranteed existence; the thrill of fulfillment to the stale calm of utopia. I will not trade freedom for beneficence nor my dignity for a handout. I will never cower before any master nor bend to any threat. It is my heritage to stand erect, proud and unafraid; to think and act for myself, enjoy the benefit of my creations and to face the world boldly and say, “This I have done.” - Dean Alfange

02-19-2007, 09:15 PM	#4 (permalink)
FeedTheDogg Active Member Join Date: Jul 2006 Location: Carlsbad, CA	I think the part that says Ball detents refers to the sheridan detents that they can install on old sheridans.

02-20-2007, 11:31 PM	#6 (permalink)
IndustrialHalo Rec Poster Join Date: Apr 2006	I believe I've heard of a Dye stainless or Carter stainless with wedgits; I can't help you on cost though, I have no idea.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search