Paintball

[himurax13]

Cool, but does anyone have an E-Blazer with the E-1 frames with the MQ1 valves that actually works?

[Cunha]

I think they do..

Himurax - your gun has an E2.

KAJohnson.com - MQ-Valve General Information

for mq valve info.

It should be workable to the point of reliability, but the things have proven to be finnicky.

I dont know how Eblazers work, but with a normal cocker, when you MQ the gun you remove the pancake solenoid that trips the sear since it is now done electronically.

So you would need that solenoid and the standard hammer, hammer spring, and back cap.

That gun was a great deal. Notice that it has no engraving because it is bad ***.

[motomut]

Originally Posted by himurax13

Cool, but does anyone have an E-Blazer with the E-1 frames with the MQ1 valves that actually works?

see my post on page 1, the set up is an E-1 frame with a Zero-B board and an mQ1. You can find Zero-B boards on eBay now and then. The E-1 boards are red LED, Zero-B are blue LCD, your e-2 board is pretty much the same as a Zero-B. A T-board from scenario dreams is a lower priced option that will work with the mQ and has a greater range of adjustment for dwell. There is also a white washer that came with the mQ that when installed allows a bit higher input pressure, it helped my marker get a little higher velocity with more consistency.

[Harbinger[TG]]

Originally Posted by motomut

see my post on page 1, the set up is an E-1 frame with a Zero-B board and an mQ1. You can find Zero-B boards on eBay now and then. The E-1 boards are red LED, Zero-B are blue LCD, your e-2 board is pretty much the same as a Zero-B. A T-board from scenario dreams is a lower priced option that will work with the mQ and has a greater range of adjustment for dwell. There is also a white washer that came with the mQ that when installed allows a bit higher input pressure, it helped my marker get a little higher velocity with more consistency.

Will the T-Board work in all the EBZ compatible frames (e1, e2, worrframe)? I have an E1 frame bid on ebay but it has the 1.06 in it.

[motomut]

it should
Scenario Dreams, LLC

if in doubt you can ask Damon (damon@scenariodreams.com) he's great at getting back to you quick

[Harbinger[TG]]

Originally Posted by motomut

it should
Scenario Dreams, LLC

if in doubt you can ask Damon (damon@scenariodreams.com) he's great at getting back to you quick

thank you

[MrFancyPants]

Here's a couple of pics of my Blazer to E-Blazer.
Before [IMG][/IMG]


After

[motomut]

^ very nice, you should post it in the Milled Blazer thread.
also, you'll want to tuck the eye ribbon into the groove on the frame, it looks like it is pinched between the frame and the grip and those things are prone to damage if exposed.

[Cunha]

Awesomely gorgeous. Notice the machining on the bottom of that blazer.. the frame doesnt contact the body at that point. (regarding the eblade eye)

[motomut]

Originally Posted by Cunha

Notice the machining on the bottom of that blazer.. the frame doesnt contact the body at that point. (regarding the eblade eye)

ah,ok