|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
06-26-2008, 08:11 AM
| #1 (permalink) |
| MCB Member Join Date: Feb 2007
Posts: 1,785
| Lubing the Hurricane Bolt(s) I got flat delrin o-rings in my hurricane, do I need to lube them up with oil?
__________________ Heebs Feedback |
|  |
|
06-26-2008, 08:26 AM
| #2 (permalink) |
| .:|Purification Admin|:.  Join Date: Apr 2006 Location: PA
Posts: 5,046
 | yes use a light coating of oil.
__________________ Advertise on MCB That's two-ing thirteen while she's eleven-ing your five........  PPS4LIFE..........\______ ........../__|___!\___ ..........\'o)i___l_o)_; |
| |
|
06-26-2008, 08:50 AM
| #3 (permalink) | |
| Rec Poster  Join Date: Oct 2006 Location: Ann Arbor, Mi
Posts: 40
| Quote:
I 'upgraded' to delrin o rings on my Blazer a couple of years back, and oiled them as I had the rubber rings. After a while they got very tight, to the point of interfering with smooth bolt operation. I put a thread about it on POG forums, Craig suggested clipping the rings a little bit, before doing this I cleaned them off and left them for while, when I came to do the clipping the bolt was sliding as normal so I never did it, i don't oil them now and they slide nicely. According to the material properties Delrin shouldn't swell with oil, but my experience was different 
__________________ Cheers Beest Adapt and Survive  Last edited by Beest; 06-26-2008 at 08:55 AM. | |
|
| |
|
06-26-2008, 08:51 AM
| #4 (permalink) |
| .:|Purification Admin|:. Join Date: Apr 2006 Location: PA
Posts: 5,046
| I trim, file and fit the flat rings when I retro fit them.
__________________ Advertise on MCB That's two-ing thirteen while she's eleven-ing your five........ PPS4LIFE..........\______ ........../__|___!\___ ..........\'o)i___l_o)_; |
|
| |
|
06-26-2008, 08:56 AM
| #5 (permalink) |
| MCB Member Join Date: Feb 2007
Posts: 1,785
| Yeah there is some serious interference with sliding the bolt in and out on the lower tube on my O/U hurc. I think I'll sand the bolt down a tad (you can see a grove forming on the bolt from interference) and clip the rings.
__________________ Heebs Feedback |
|
| |
|
06-26-2008, 08:58 AM
| #6 (permalink) |
| .:|Purification Admin|:. Join Date: Apr 2006 Location: PA
Posts: 5,046
| I run rubber on the nasty, I feel you get that bit more push.
__________________ Advertise on MCB That's two-ing thirteen while she's eleven-ing your five........ PPS4LIFE..........\______ ........../__|___!\___ ..........\'o)i___l_o)_; |
|
| |
|
06-26-2008, 09:00 AM
| #7 (permalink) | |
| MCB Member Join Date: Feb 2007
Posts: 1,785
| Quote:
__________________ Heebs Feedback | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
