PMI 1 DF, Sniper and that same Model 98 pump FS

msm0711 · 02-19-2007, 05:15 PM

All prices include shipping via USPS as well as delivery confirmation w/ tracking numbers. I accept paypal, but will do a MO if you talk to me about it before hand. I'm more than happy to answer any questions you have on the items, but if you want first call at it, please post in the thread first, then PM me with questions. Thanks!!!

PMI 1 DF (Sold)
---Ex field rental with lots of work. Drop out cut and quick strip were done prior to me having it. It was a back bottle, but I removed that, and added a rear velocity adjuster. The plug on the side is through the solder, not soldered in, so it can be easily screwed out. The Palmer detent was doen by me, but is cleanly done. The brass bead site is an NW one, not a Sheridan one. The Dummy 12 gram is a PegLeg version, ano'ed black. The bottle mount, pump handle and grips are via Palmer. The reg is a Sideline Stabilizer, with the fittings swapped to be used for this configuration. It is currently sprung and regged to shoot at 275-285 using the Empire paint I have here at home. The stab simplifies velocity adjustment, but the rear adjuster is ther as well. Comes with a PMI barrel condom.

Mini Bodied Sniper (Sold)
--- Newly finished, not chrono'ed to any set velocity, may need tuning/re-springing. Holds air and fires. Mini Body is gloss grey, ANS 90 frame is similar color grey, but in a dust finish. Gen X 2 reg, DYE 14" 1 piece boomstick (glued version). KAPP Nickel Drop Zone and ASA. Shocktech cocking rody, ANS back block and bolt. The WWA pump kit is the worst one I have of 5. The hole for the pump rod is off center and thus the rod rubbed the vert ASA area. The rod was thus filed to give it some more room, but the torque on the back block leaves the pump stroke a bit stiff. Body has knicks here and there, the rest is in prisitne condition. Body is drilled for lug adjustment and has a threaded rear velocty adjuster. Tank not included!

Model 98 Pump ($135)
--- PTP F/X Model 98 gone pump. Nickeled body, PTP upgrades. Shoots around 280 with the EMPIRE paint I have and CO2, comes with lighter springs as well. Comes with all parts to switch back to semi, as well a a DYE 14" stainless barrel, the Pump Kits CMI barrel, and a Steel Wind 10" barrel, and a Tippmann Barrel Condom.

Sexy_Chicken · 02-19-2007, 05:58 PM

PMed regarding the Sniper.

Thanks!

Titus · 02-19-2007, 05:59 PM

That DF, any clue as to where it came from? I had one with the exact same FOH in it, along with the 12 gram cut out. I got mine from CA about a year ago.

msm0711 · 02-19-2007, 06:24 PM

I actually bought it here on MCB some time ago. I believe the discussion around it was that it was a rental from a field called "Field of Honor" or something like that.

msm0711 · 02-22-2007, 11:34 PM

Prices lowered, next step = EBAY.

doglb · 02-23-2007, 01:01 AM

pmed ya!

02-19-2007, 05:15 PM	#1 (permalink)
msm0711 Rec Poster Join Date: Apr 2006 Location: Ocala, Fl	PMI 1 DF, Sniper and that same Model 98 pump FS All prices include shipping via USPS as well as delivery confirmation w/ tracking numbers. I accept paypal, but will do a MO if you talk to me about it before hand. I'm more than happy to answer any questions you have on the items, but if you want first call at it, please post in the thread first, then PM me with questions. Thanks!!! PMI 1 DF (Sold) ---Ex field rental with lots of work. Drop out cut and quick strip were done prior to me having it. It was a back bottle, but I removed that, and added a rear velocity adjuster. The plug on the side is through the solder, not soldered in, so it can be easily screwed out. The Palmer detent was doen by me, but is cleanly done. The brass bead site is an NW one, not a Sheridan one. The Dummy 12 gram is a PegLeg version, ano'ed black. The bottle mount, pump handle and grips are via Palmer. The reg is a Sideline Stabilizer, with the fittings swapped to be used for this configuration. It is currently sprung and regged to shoot at 275-285 using the Empire paint I have here at home. The stab simplifies velocity adjustment, but the rear adjuster is ther as well. Comes with a PMI barrel condom. Mini Bodied Sniper (Sold) --- Newly finished, not chrono'ed to any set velocity, may need tuning/re-springing. Holds air and fires. Mini Body is gloss grey, ANS 90 frame is similar color grey, but in a dust finish. Gen X 2 reg, DYE 14" 1 piece boomstick (glued version). KAPP Nickel Drop Zone and ASA. Shocktech cocking rody, ANS back block and bolt. The WWA pump kit is the worst one I have of 5. The hole for the pump rod is off center and thus the rod rubbed the vert ASA area. The rod was thus filed to give it some more room, but the torque on the back block leaves the pump stroke a bit stiff. Body has knicks here and there, the rest is in prisitne condition. Body is drilled for lug adjustment and has a threaded rear velocty adjuster. Tank not included! Model 98 Pump ($135) --- PTP F/X Model 98 gone pump. Nickeled body, PTP upgrades. Shoots around 280 with the EMPIRE paint I have and CO2, comes with lighter springs as well. Comes with all parts to switch back to semi, as well a a DYE 14" stainless barrel, the Pump Kits CMI barrel, and a Steel Wind 10" barrel, and a Tippmann Barrel Condom. Last edited by msm0711; 02-28-2007 at 07:07 AM..

02-19-2007, 05:58 PM	#2 (permalink)
Sexy_Chicken Seasoned Member Join Date: Mar 2006 Location: South Joisey	PMed regarding the Sniper. Thanks! __________________ Feedback: MCB SCP

02-23-2007, 01:01 AM	#6 (permalink)
doglb Fear the Dog! Join Date: Jul 2006	pmed ya! __________________ Feedback: MCB, SCP, EBAY-Just ask! Rogue #11 *"Nothing Personal, Its Just Business"*

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-19-2007, 05:59 PM	#3 (permalink)
Titus Sunstar Paramedics Slave Join Date: Mar 2006 Location: The Group W Bench	That DF, any clue as to where it came from? I had one with the exact same FOH in it, along with the 12 gram cut out. I got mine from CA about a year ago.

02-19-2007, 06:24 PM	#4 (permalink)
msm0711 Rec Poster Join Date: Apr 2006 Location: Ocala, Fl	I actually bought it here on MCB some time ago. I believe the discussion around it was that it was a rental from a field called "Field of Honor" or something like that.

02-22-2007, 11:34 PM	#5 (permalink)
msm0711 Rec Poster Join Date: Apr 2006 Location: Ocala, Fl	Prices lowered, next step = EBAY.