FS : Phantom VSC 45 Frame w/ Tanks w/ Barrels and Extras

RobAGD · 12-06-2010, 11:28 PM

Ok this poor gun has been gathering dust in my spare gear bag for a while. I have had it for a few years and it has maybe 10 cases through it. Just don't play as much pump as I use to, so it is time for a new home.

Ok here are my guidelines :

#1 No trades, that means no trades. Out side of you sending me $$ for my stuff. I don't want your guns or other misc gear.
#2 I can take paypal
#3 I will ship when payment is verified. Yes I know I have little feed back here, I am fairly well known AGD tech. If you want to use a 3rd party we can work that out later. I am not in the habit of selling off my gear hence the lackof feed back.
#4 I want to sell this as a complete package. So Unless you offer me way more than I think it's worth I am not breaking the package up at this time.
#5 Again no gear trades, I have several gear bags of stuff I don't want any thing but cash.

Black Phantom VSC w/ 11" CCI Barrel
Black Phantom Vertical Feed Breach w/ Vert Adapter
Sumo T-Sock
Lapco 7* Bottom Line Wedge
Lapco Bigshot .689 14" Barrel ( I would say less than 2 cases through this )
13ci 3k Polished Tank w/ 3k AGD Flatline Adjustable Reg
Proteam Products Flatline Dove Tail Sleeve
Bottom Line Dove Tail ( Needs 2 button heads 10/32 screws, and 1 or 2 10/32 set screws )
(2) 3.5oz Tanks 1 w/ On/Off
40rnd Ammo Box (Not pictured)
Unique Sporting Wrist 12 Gram holder
(8) 10rnd Ball Tubes (2) w/o Caps

Phantom Parts :

(3) Gate Feeds
Front Frame Screw
Rear Frame Screw
Inline Feed Housing Screw
(2) Grip Screws
Front Bolt O-Ring
Valve O-ring
(2) sets Barrel Sizer rings (1 missing blue )
PT w/ Cup Seal Assembly
Punch Pin Assy
(2) Cup Seal Carriers
Selection of Nylon Grub Screws
Selection of Punch Pin Seals
Selection of Cup Seal Seats
(4) Valve Springs
(6) Drive/Hammer Springs

The gun has normal wear and tear on it, some small scratches etc. The only issue with the gun would be the feed tube was loose and I drilled and tapped 2 small screws to retain the tube. The image above links to a much larger image where you can see the small screw low on the SC breach.

Asking $490. This is for the lot, I am fairly firm on the price. Hit me with PM's they will be ordered by time/date.

-Robert

RobAGD · 12-08-2010, 10:13 AM

back to the top

Thanks for looking

-R

Gunz · 12-08-2010, 11:19 AM

PM sent

nePhantom · 12-08-2010, 02:36 PM

part the lapco barrel?

RobAGD · 12-09-2010, 03:29 PM

nePhantom - asof right now no. If I get a majority of the package spoken for I'll think about it.

-R

RobAGD · 12-10-2010, 02:42 PM

bump

RobAGD · 12-13-2010, 12:06 PM

bump a roonie

-R

jjpyro · 12-14-2010, 12:22 AM

how much for
Black Phantom VSC w/ 11" CCI Barrel
Sumo T-Sock
Lapco 7* Bottom Line Wedge

RobAGD · 12-15-2010, 11:31 AM

PM's sent

Bump

-R

RobAGD · 12-22-2010, 10:18 AM

Bump for the holidays

-R

12-06-2010, 11:28 PM	#1 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	FS : Phantom VSC 45 Frame w/ Tanks w/ Barrels and Extras Ok this poor gun has been gathering dust in my spare gear bag for a while. I have had it for a few years and it has maybe 10 cases through it. Just don't play as much pump as I use to, so it is time for a new home. Ok here are my guidelines : #1 No trades, that means no trades. Out side of you sending me $$ for my stuff. I don't want your guns or other misc gear. #2 I can take paypal #3 I will ship when payment is verified. Yes I know I have little feed back here, I am fairly well known AGD tech. If you want to use a 3rd party we can work that out later. I am not in the habit of selling off my gear hence the lackof feed back. #4 I want to sell this as a complete package. So Unless you offer me way more than I think it's worth I am not breaking the package up at this time. #5 Again no gear trades, I have several gear bags of stuff I don't want any thing but cash. Black Phantom VSC w/ 11" CCI Barrel Black Phantom Vertical Feed Breach w/ Vert Adapter Sumo T-Sock Lapco 7* Bottom Line Wedge Lapco Bigshot .689 14" Barrel ( I would say less than 2 cases through this ) 13ci 3k Polished Tank w/ 3k AGD Flatline Adjustable Reg Proteam Products Flatline Dove Tail Sleeve Bottom Line Dove Tail ( Needs 2 button heads 10/32 screws, and 1 or 2 10/32 set screws ) (2) 3.5oz Tanks 1 w/ On/Off 40rnd Ammo Box (Not pictured) Unique Sporting Wrist 12 Gram holder (8) 10rnd Ball Tubes (2) w/o Caps Phantom Parts : (3) Gate Feeds Front Frame Screw Rear Frame Screw Inline Feed Housing Screw (2) Grip Screws Front Bolt O-Ring Valve O-ring (2) sets Barrel Sizer rings (1 missing blue ) PT w/ Cup Seal Assembly Punch Pin Assy (2) Cup Seal Carriers Selection of Nylon Grub Screws Selection of Punch Pin Seals Selection of Cup Seal Seats (4) Valve Springs (6) Drive/Hammer Springs The gun has normal wear and tear on it, some small scratches etc. The only issue with the gun would be the feed tube was loose and I drilled and tapped 2 small screws to retain the tube. The image above links to a much larger image where you can see the small screw low on the SC breach. Asking $490. This is for the lot, I am fairly firm on the price. Hit me with PM's they will be ordered by time/date. -Robert

12-08-2010, 11:19 AM	#3 (permalink)
Gunz MCB Member Join Date: Jan 2010	PM sent __________________ My Feedback: http://www.mcarterbrown.com/forums/f...ml#post1380517

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-08-2010, 10:13 AM	#2 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	back to the top Thanks for looking -R

12-08-2010, 02:36 PM	#4 (permalink)
nePhantom I love my Cheese Join Date: Jan 2009 Location: Omaha, NE	part the lapco barrel?

12-09-2010, 03:29 PM	#5 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	nePhantom - asof right now no. If I get a majority of the package spoken for I'll think about it. -R

12-10-2010, 02:42 PM	#6 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	bump

12-13-2010, 12:06 PM	#7 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	bump a roonie -R

12-14-2010, 12:22 AM	#8 (permalink)
jjpyro Almost bearded ninja Join Date: Nov 2010 Location: America	how much for Black Phantom VSC w/ 11" CCI Barrel Sumo T-Sock Lapco 7* Bottom Line Wedge

12-15-2010, 11:31 AM	#9 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	PM's sent Bump -R

12-22-2010, 10:18 AM	#10 (permalink)
RobAGD Cranky Wanker Join Date: Dec 2009 Location: Reston	Bump for the holidays -R