Midblocked and Anodized Chaos Series GX-4 E-Pump, truly 1 of 1

dynastypballa · 02-25-2011, 04:34 PM

SHIPPED AND SOLD

This gun is like new, The bolt bore has been honed and a new bolt was made to spec, new ano has never been used in a game after all the work. The pump kit is fully custom made from 6061 aluminum and delrin. The bottom guide rods along with their end caps are delrin for wear resistance with an aluminum core that's threaded 1/2 inch in to the rod. The main guide rod is 6061 with 2 orings space apart, which the pump handle rides on instead of aluminum. If you'll notice the guide rod is threaded all the way through, this is for the pump rods to screw in to so DO NOT use pliers to remove the the pump guide.

Don't mind those white specs just some dust, the black is flawless.

Also has an undershot bolt which surprisingly works well. I was running the gun at 120 psi on my air compressor just to see if it shot well and the shot went about 50 yards!

Parts list

Eblade
E1 Board
Check it on off
new Black out macro fittings and new macro
Ans valve along with the ans velocity adjuster
Custom under shot bolt (Tolerance to the bore is .005 or less.)
Custom pump kit and mid-block kit
Sidewinder reg (optional)
Most of the screws are new and blue locktighted.
Pump rods are adjustable out to about 1/4 inch with small set crews on the ends of the rods
Sadly the detent is not anodized since its steal so I powder coated it

I guess that's about it!

SHIPPED AND SOLD

singleshot · 02-25-2011, 04:37 PM

Just wow...

dynastypballa · 02-26-2011, 07:42 PM

bumppp

PumpDeez · 02-26-2011, 08:57 PM

Wow I started looking at this thread and got through the pics and thought, "this looks sweet but I bet this guy is going to ask like 600 bucks for this thing"

$375 is awesome for a really tasteful custom job as this is!
Really beautiful work.
How does she shoot?

My wallet is on the desk just taunting me...

chopper duke · 02-26-2011, 09:12 PM

Must. Resist. Offer.

Deadmeat99 · 02-26-2011, 10:00 PM

I really want this but I hesistate due to the non adjustable feedneck.

superman · 02-26-2011, 10:17 PM

im pretty sure that gx4's have threaded feednecks

Ramous · 02-27-2011, 10:12 AM

Trades?

Interested in an Egomag?

sunnysideca76 · 02-27-2011, 10:54 AM

Quote:

Originally Posted by superman

im pretty sure that gx4's have threaded feednecks

nope not threaded

dynastypballa · 02-27-2011, 10:26 PM

as of now I dont want trades just cash thanks tho

02-25-2011, 04:34 PM	#1 (permalink)
dynastypballa Active Member Join Date: Jul 2007	Midblocked and Anodized Chaos Series GX-4 E-Pump, truly 1 of 1 SHIPPED AND SOLD This gun is like new, The bolt bore has been honed and a new bolt was made to spec, new ano has never been used in a game after all the work. The pump kit is fully custom made from 6061 aluminum and delrin. The bottom guide rods along with their end caps are delrin for wear resistance with an aluminum core that's threaded 1/2 inch in to the rod. The main guide rod is 6061 with 2 orings space apart, which the pump handle rides on instead of aluminum. If you'll notice the guide rod is threaded all the way through, this is for the pump rods to screw in to so DO NOT use pliers to remove the the pump guide. Don't mind those white specs just some dust, the black is flawless. Also has an undershot bolt which surprisingly works well. I was running the gun at 120 psi on my air compressor just to see if it shot well and the shot went about 50 yards! Parts list Eblade E1 Board Check it on off new Black out macro fittings and new macro Ans valve along with the ans velocity adjuster Custom under shot bolt (Tolerance to the bore is .005 or less.) Custom pump kit and mid-block kit Sidewinder reg (optional) Most of the screws are new and blue locktighted. Pump rods are adjustable out to about 1/4 inch with small set crews on the ends of the rods Sadly the detent is not anodized since its steal so I powder coated it I guess that's about it! SHIPPED AND SOLD __________________ I Want Your Beat Up Crap Last edited by dynastypballa; 03-28-2011 at 12:58 PM.

02-25-2011, 04:37 PM	#2 (permalink)
singleshot Post Whore Join Date: Dec 2006	Just wow... __________________ Singleshot's Feedback

02-26-2011, 07:42 PM	#3 (permalink)
dynastypballa Active Member Join Date: Jul 2007	bumppp __________________ I Want Your Beat Up Crap

02-26-2011, 10:00 PM	#6 (permalink)
Deadmeat99 MCB Member Join Date: Apr 2009 Location: Manteno, IL	I really want this but I hesistate due to the non adjustable feedneck. __________________ Feedback http://www.mcarterbrown.com/forums/f...-feedback.html

02-26-2011, 10:17 PM	#7 (permalink)
superman Post Whore Join Date: Jun 2007 Location: Charleston, SC	im pretty sure that gx4's have threaded feednecks __________________ FOR TRADE/SALE: ul'd pmr, dye sniper2 feedback(http://www.mcarterbrown.com/forums/f...-feedback.html)

02-26-2011, 08:57 PM	#4 (permalink)
PumpDeez Active Member Join Date: Mar 2010	Wow I started looking at this thread and got through the pics and thought, "this looks sweet but I bet this guy is going to ask like 600 bucks for this thing" $375 is awesome for a really tasteful custom job as this is! Really beautiful work. How does she shoot? My wallet is on the desk just taunting me...

02-27-2011, 10:12 AM	#8 (permalink)
Ramous Tigerstyle Join Date: Dec 2008 Location: Bartlett,Illinois	Trades? Interested in an Egomag? __________________ If I have dealt with you, please leave feedback. http://www.mcarterbrown.com/forums/f...-feedback.html "I have become death, the destroyer of worlds." Julius Robert Oppenheimer (After making the atomic bomb, taken from the Bhagavad Gita) "Two hands working can do more than a thousand clasped in prayer." â€“ Anonymous " Do you think your Wu-Tang Sword can defeat me?!"

02-27-2011, 10:26 PM	#10 (permalink)
dynastypballa Active Member Join Date: Jul 2007	as of now I dont want trades just cash thanks tho __________________ I Want Your Beat Up Crap

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search