FS/FT: Halfblock superstock, ccm, slider frame

dtpacman · 04-09-2008, 10:15 AM

I have here my project build halfblock superstock. The body and VA are have been recently reanodized a dust clear by the folks over at pbmodshop. I'm looking to sell/trade. I'll give you the full rundown on each part and what's included below the pic.

Post and send me a PM if you're interested or need added info/pics

Halfblock PROSTOCK (body milling and hammer slotting done by local machinist. ano by pbmodshop. has eye holes)

*edit* hmm so i'm thinking the body might have been a prostock not a superstock, but honestly I'm not sure. You guys can decide. It is what it is now, which is a halfblocked AC body.

jcurt halfblock kit (sled/bolt/pin never used)

Old school composite slider w/ agd grips (No safety)

Stock reg (purchased on pbn, seller said its never seen air)

CCM feedneck (used and nicked but still work fine)

Evil valve kit (brand new and installed with included valve spring)

Main spring used is the one that came with the body when I purchased it, it's a blueish color.

IVG and valve retaining nut are stock.

CCM deluxe pump kit black/black (halfblock pump arm on order)

Will also include a valve tool, the 8pt socket needed to remove the VA, and an extra stock length pump arm (that way you can cut one to halfblock length and have a stock length one in case you want to transfer the pump kit)

Prices:

**Price lowered**
$200 gets you everything shipped

Not looking to part anything out further.

Trades: Solid color, stock vsc phantoms (not looking to add). Will also look at your electros but most likely won't add that much so your trade possibilities are limited (no ions or blowbacks). No snipers.

I will ship everything USPS postal w/ delivery confirmation for the prices listed. If you want insurance, ask and we'll adjust accordingly.

If you're buying outright, it'll be Paypal (no credit card payments). Once we lock down a deal I'll set up a verified account and we'll be on our way.

As far as who ships first, that's at my discretion. If you have great feedback as a seller/trader I'll consider sending first since I have not done any deals on here.

Thanks for looking.

therealjt · 04-13-2008, 05:16 PM

pm sent

dtpacman · 04-13-2008, 06:13 PM

sent you one back

eric · 04-13-2008, 07:24 PM

Sent you a pm about this as well

magmasher · 04-13-2008, 07:56 PM

i take it, it is drilled for eyes?

Andrewliu6294 · 04-13-2008, 08:05 PM

Quote:

Originally Posted by magmasher

i take it, it is drilled for eyes?

well, being that it's a superstock, yes, it is. It should also have the groove for the eye cover.

soccerken · 04-13-2008, 08:30 PM

Le dp fusion 7?

dtpacman · 04-13-2008, 09:19 PM

Yes it's cut for eyes. I just edited the first post with a second pic to show this. No groove for eye covers though. Prehaps I am wrong in calling it a superstock body, that's what the seller of the original body called it when I purchased it from him?

*edit* prostock body maybe? anyway, it's halfblocked and reano'd now so it is what it is.

Also, i'll pass on the fusion

Also, I'll update the original post with pics of the pump kit when I get it, should be sometime this week.

jeryzkid22 · 04-14-2008, 03:21 PM

Texas Storm Timmy plus $50 if you can get everything working as a pump marker.

dtpacman · 04-14-2008, 04:29 PM

i'll pass on the intimidator.

04-09-2008, 10:15 AM	#1 (permalink)
dtpacman Rec Poster Join Date: Mar 2008	FS/FT: Halfblock superstock, ccm, slider frame I have here my project build halfblock superstock. The body and VA are have been recently reanodized a dust clear by the folks over at pbmodshop. I'm looking to sell/trade. I'll give you the full rundown on each part and what's included below the pic. Post and send me a PM if you're interested or need added info/pics Halfblock PROSTOCK (body milling and hammer slotting done by local machinist. ano by pbmodshop. has eye holes) edit hmm so i'm thinking the body might have been a prostock not a superstock, but honestly I'm not sure. You guys can decide. It is what it is now, which is a halfblocked AC body. jcurt halfblock kit (sled/bolt/pin never used) Old school composite slider w/ agd grips (No safety) Stock reg (purchased on pbn, seller said its never seen air) CCM feedneck (used and nicked but still work fine) Evil valve kit (brand new and installed with included valve spring) Main spring used is the one that came with the body when I purchased it, it's a blueish color. IVG and valve retaining nut are stock. CCM deluxe pump kit black/black (halfblock pump arm on order) Will also include a valve tool, the 8pt socket needed to remove the VA, and an extra stock length pump arm (that way you can cut one to halfblock length and have a stock length one in case you want to transfer the pump kit) Prices: Price lowered $200 gets you everything shipped Not looking to part anything out further. Trades: Solid color, stock vsc phantoms (not looking to add). Will also look at your electros but most likely won't add that much so your trade possibilities are limited (no ions or blowbacks). No snipers. I will ship everything USPS postal w/ delivery confirmation for the prices listed. If you want insurance, ask and we'll adjust accordingly. If you're buying outright, it'll be Paypal (no credit card payments). Once we lock down a deal I'll set up a verified account and we'll be on our way. As far as who ships first, that's at my discretion. If you have great feedback as a seller/trader I'll consider sending first since I have not done any deals on here. Thanks for looking. Last edited by dtpacman; 04-27-2008 at 06:08 PM.. Reason: added new pics

04-13-2008, 07:24 PM	#4 (permalink)
eric Seasoned Member Join Date: Apr 2006 Location: Port Colborne,ON	Sent you a pm about this as well __________________ pbnation: A web site where, on any given evening, one may find approximately 500 paintball enthusiasts discussing the sport, and 1500 teenagers calling each other gay.

04-13-2008, 07:56 PM	#5 (permalink)
magmasher MCB Member Join Date: Jan 2008 Location: N.W.Ontario, Canuckistan	i take it, it is drilled for eyes? __________________ CC Feedback MCB Feedback I Am Canadian

04-13-2008, 08:30 PM	#7 (permalink)
soccerken Active Member Join Date: May 2007	Le dp fusion 7? __________________ IF YOUR PARENTS DON'T PAY FOR YOUR PAINTBALL STUFF PUT THIS IN YOUR SIG rockin the splatmaster

04-13-2008, 09:19 PM	#8 (permalink)
dtpacman Rec Poster Join Date: Mar 2008	Yes it's cut for eyes. I just edited the first post with a second pic to show this. No groove for eye covers though. Prehaps I am wrong in calling it a superstock body, that's what the seller of the original body called it when I purchased it from him? edit prostock body maybe? anyway, it's halfblocked and reano'd now so it is what it is. Also, i'll pass on the fusion Also, I'll update the original post with pics of the pump kit when I get it, should be sometime this week. Last edited by dtpacman; 04-13-2008 at 10:11 PM..

04-13-2008, 05:16 PM	#2 (permalink)
therealjt Active Member Join Date: Mar 2008	pm sent

04-13-2008, 06:13 PM	#3 (permalink)
dtpacman Rec Poster Join Date: Mar 2008	sent you one back

04-14-2008, 03:21 PM	#9 (permalink)
jeryzkid22 Rec Poster Join Date: Apr 2008	Texas Storm Timmy plus $50 if you can get everything working as a pump marker.

04-14-2008, 04:29 PM	#10 (permalink)
dtpacman Rec Poster Join Date: Mar 2008	i'll pass on the intimidator.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search