14 piece pre-Dye Carter Buzzard Stainless Bolt Kit

souz4402 · 08-15-2008, 01:21 AM

PM me for paypal info and any questions. Thank you!

Cunha · 08-15-2008, 01:23 AM

I thought you were selling the gun itself and showing how you replaced the incorrect pump arm screws.

souz4402 · 08-15-2008, 01:39 AM

actually those knurled black oxide pump arm screws came stock and I would replace those too if I could find the same thing in SS

Chaos · 08-15-2008, 08:51 AM

Closest thing I found for pump arm screws in SS was Automag valve retaining screws...have to be cut to fit though

idkfa · 08-15-2008, 11:11 AM

PM Sent.

souz4402 · 08-15-2008, 12:47 PM

I found really nice SS knurled screws that work well and are smaller than the stock black oxide once the only problem is that the entire screw is threaded...that small 1/4" of thread that shows is too much for me to handle. It just sticks out too much!

One of these days Im going to break down and just bite the bullet at a machine shop for some exact replica SS knurled pump arm bolts.

souz4402 · 08-17-2008, 07:38 PM

up...

souz4402 · 08-19-2008, 01:05 PM

up...no one has any old carter buzzards laying around w/ rusty black oxide bolts?

souz4402 · 08-21-2008, 02:13 PM

up...fast shipping!

souz4402 · 08-26-2008, 11:42 PM

TTT

preserve your carter! say no to black oxide!

08-15-2008, 01:21 AM	#1 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	14 piece pre-Dye Carter Buzzard Stainless Bolt Kit PM me for paypal info and any questions. Thank you!

08-15-2008, 08:51 AM	#4 (permalink)
Chaos Spread The Virus Join Date: Mar 2006 Location: Hudson,MA	Closest thing I found for pump arm screws in SS was Automag valve retaining screws...have to be cut to fit though __________________ Chaos PoG Member # 1018 LPPC Member #71 NO'MAAM #5 My Gallery My Feedback FORUM RULES AND FAQ'S

08-15-2008, 11:11 AM	#5 (permalink)
idkfa Loose Cannon Join Date: Mar 2007 Location: St. John's, NL, Canada	PM Sent. __________________ MCB Feedback The PhOG Feedback eBay Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-15-2008, 01:23 AM	#2 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA	I thought you were selling the gun itself and showing how you replaced the incorrect pump arm screws.

08-15-2008, 01:39 AM	#3 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	actually those knurled black oxide pump arm screws came stock and I would replace those too if I could find the same thing in SS

08-15-2008, 12:47 PM	#6 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	I found really nice SS knurled screws that work well and are smaller than the stock black oxide once the only problem is that the entire screw is threaded...that small 1/4" of thread that shows is too much for me to handle. It just sticks out too much! One of these days Im going to break down and just bite the bullet at a machine shop for some exact replica SS knurled pump arm bolts.

08-17-2008, 07:38 PM	#7 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	up...

08-19-2008, 01:05 PM	#8 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	up...no one has any old carter buzzards laying around w/ rusty black oxide bolts?

08-21-2008, 02:13 PM	#9 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	up...fast shipping!

08-26-2008, 11:42 PM	#10 (permalink)
souz4402 www.theoringstore.com Join Date: Jul 2008 Location: Moscow, Idaho	TTT preserve your carter! say no to black oxide!