Metadyne Thumper Stuff - Page 2

chopper duke · 08-12-2011, 06:01 PM

Alright I think someone else had a different one.

I updated the link in to an updated manual.

Triemferent · 08-12-2011, 09:55 PM

this is what mine looks like
imo, I think the MI logo looks better
sorry for the poor quality pic (cell phone).
Im sure some one else can take better pics

chopper duke · 08-12-2011, 09:59 PM

Quote:

Originally Posted by Triemferent

this is what mine looks like
imo, I think the MI logo looks better
sorry for the poor quality pic (cell phone).
Im sure some one else can take better pics
http://img.photobucket.com/albums/v1...t/IMG_0793.jpg

What's your S/N?

Triemferent · 08-12-2011, 10:03 PM

#56

chopper duke · 08-12-2011, 10:05 PM

Cool. I'm going to make a list of #s and Logos. Or at least Lowest/ Highest. So far, you have the highest # for that logo so far.

chopper duke · 08-13-2011, 02:11 PM

Can anyone confirm or deny the following? Maybe someone w/ better tools than I.

Screw Sizes:

X1 Feedtube Screw: Cap Head 3/8" x 8-32 + Lock Washer (+1 w/ the OC Adapter)
X2 Rear Thumb Paddle Screw: Set Screw 3/16" x 10-32
X2 Breech/ Detent Housing Screw: Cap Head 1" x 4-40
X1 Thumb Paddle Screw: Set Screw 3/16" x 8-32 (+1 w/ additional Side Paddle)
X2 Trigger Assembly Screw: Cap Head 3/8" x 4-40
X2 Body Screws: 3/4" x 4-40

senghing27 · 08-13-2011, 02:14 PM

Quote:

Originally Posted by chopper duke

Can anyone confirm or deny the following? Maybe someone w/ better tools than I.

Screw Sizes:

X1 Feedtube screw: Cap Head 3/8 x 8-32 (+1 w/ the OC Adapter)
X2 Rear Thumb ScrewPaddle: Set Screw 3/16 x 10-32
X2 Breech/ Detent Housing Screw: Cap Head 1" x 4-40
x1 Thumb Paddle Screw: Set Screw 3/16 x 8-32 (+1 w/ additional Side Paddle)
x2 Trigger Assembly Screw: Cap Head 3/8 x 4-40
x2 Body Screws: 3/4 x 4-40

Everything looks about right. I can't seem to find my toolbox from the move.
You might want to make a side note that when using the stockclass/oc adapter needs to be a lock washer in the front most spot or the screw will overshoot the breech.

chopper duke · 08-13-2011, 02:17 PM

Quote:

Originally Posted by senghing27

Everything looks about right. I can't seem to find my toolbox from the move.
You might want to make a side note that when using the stockclass/oc adapter needs to be a lock washer in the front most spot or the screw will overshoot the breech.

Good Call! I'll also note it in the manual.

Critical · 08-13-2011, 04:15 PM

Quote:

Originally Posted by chopper duke

Cool. I'm going to make a list of #s and Logos. Or at least Lowest/ Highest. So far, you have the highest # for that logo so far.

Braeden's #231 has no logo, but it seems to be an outlier so far.

joedirt199 · 08-16-2011, 10:40 AM

i think this is the actual email address not the one posted at the first page. i tried the other one and got no response after a week. i am trying this one now. this address is where all my previous emails came from so i trust this one better. it is the one listed on their website.

metadyneindustries@gmail.com

08-12-2011, 06:01 PM	#11 (permalink)
chopper duke www.Axial-Photography.com Join Date: Jun 2008 Location: Metro ATL	Alright I think someone else had a different one. I updated the link in to an updated manual. __________________ My: MCB feedback {total = 275+}

08-12-2011, 10:05 PM	#15 (permalink)
chopper duke www.Axial-Photography.com Join Date: Jun 2008 Location: Metro ATL	Cool. I'm going to make a list of #s and Logos. Or at least Lowest/ Highest. So far, you have the highest # for that logo so far. __________________ My: MCB feedback {total = 275+}

08-13-2011, 02:11 PM	#16 (permalink)
chopper duke www.Axial-Photography.com Join Date: Jun 2008 Location: Metro ATL	Can anyone confirm or deny the following? Maybe someone w/ better tools than I. Screw Sizes: X1 Feedtube Screw: Cap Head 3/8" x 8-32 + Lock Washer (+1 w/ the OC Adapter) X2 Rear Thumb Paddle Screw: Set Screw 3/16" x 10-32 X2 Breech/ Detent Housing Screw: Cap Head 1" x 4-40 X1 Thumb Paddle Screw: Set Screw 3/16" x 8-32 (+1 w/ additional Side Paddle) X2 Trigger Assembly Screw: Cap Head 3/8" x 4-40 X2 Body Screws: 3/4" x 4-40 __________________ My: MCB feedback {total = 275+} Last edited by chopper duke; 08-13-2011 at 02:19 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-12-2011, 09:55 PM	#12 (permalink)
Triemferent Active Member Join Date: Jul 2006	this is what mine looks like imo, I think the MI logo looks better sorry for the poor quality pic (cell phone). Im sure some one else can take better pics

08-12-2011, 10:03 PM	#14 (permalink)
Triemferent Active Member Join Date: Jul 2006	#56

08-16-2011, 10:40 AM	#20 (permalink)
joedirt199 ur my sister Join Date: Apr 2009 Location: St Louis	i think this is the actual email address not the one posted at the first page. i tried the other one and got no response after a week. i am trying this one now. this address is where all my previous emails came from so i trust this one better. it is the one listed on their website. metadyneindustries@gmail.com