mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Pump Markers (http://www.mcarterbrown.com/forums/pump-markers/)
-   -   Best budget Autococker pumpkit (http://www.mcarterbrown.com/forums/pump-markers/210863-best-budget-autococker-pumpkit.html)

Bubkat 08-13-2012 07:20 PM

Best budget Autococker pumpkit
 
I'm looking to turn an old ans gen x cocker into a pump and was wondering what the best option for a cheap pump kit is? I think my cocker is pre 2k, but is there a way to check the year before ordering a pumpkit?

Thanks!

brew52 08-13-2012 07:21 PM

I really like the CCM economy kit. Post up a pick and we can see what year it is.

Bubkat 08-13-2012 07:27 PM

my marker looks just like this except with red ans upgrades and the is serial number #53134
http://www.pbase.com/k_macocker/image/73454000.jpg

super_stanchy 08-13-2012 07:29 PM

how big is the front block hole?

is it like 1/2" hole
(takes up most of the front face)

or is it like 3/8" hole
(looks really small, more like a #2 pencil size)


ans made both pre and 2k+

for $30 the wgp ergo pump kits are really nice
i just spent $37 i think on the carter pump kit

(both were on sale at paintballgateway.com)

i havnt tried the ccm eco kit... but its had great reviews


edit:
saw the pic, im 99% sure its PRE2k.
unscrew the bolt on the front of the gun (looks like a worm kinda... haha) then refer to the first part of my post!

brew52 08-13-2012 07:58 PM

Like Staunchy said, it is probably pre 2k. Take the front bolt out and you can make sure.

SD.Pump 08-18-2012 04:13 PM

Protip: the pre2k hole is the same size and thread as the detent hole.

The $28 Hooptie kit on eBay is perfectly fine.

hmcl281 08-18-2012 04:23 PM

Quote:

Originally Posted by SD.Pump (Post 2447924)
Protip: the pre2k hole is the same size and thread as the detent hole.

The $28 Hooptie kit on eBay is perfectly fine.

so i can thread my pre2k banjo bolt into my detent hole? good info to know

Bubkat 08-19-2012 05:34 PM

Thanks for the help (marker needs pre-2k pumpkit)! I was cleaning the marker today and when I removed the ans genx regulator parts of an old o-ring fell out of the vert asa. The o-ring on the ans reg is still intact; is this something i should be worried about? I think the previous owner may just have put an extra o-ring in the asa to accommodate his weird setup (ans reg wasn't screwed in all the way so that a way too small steel braided hose could fit the dropforward).

super_stanchy 08-20-2012 05:05 PM

Quote:

Originally Posted by Bubkat (Post 2448739)
Thanks for the help (marker needs pre-2k pumpkit)! I was cleaning the marker today and when I removed the ans genx regulator parts of an old o-ring fell out of the vert asa. The o-ring on the ans reg is still intact; is this something i should be worried about? I think the previous owner may just have put an extra o-ring in the asa to accommodate his weird setup (ans reg wasn't screwed in all the way so that a way too small steel braided hose could fit the dropforward).

gas it up, if it leaks its from 1 of 2 spots.

the front banjo (worm lookin thing) or the valve

if you gas it up, no leaks, no problem, no worries!

Hawkeye20 08-20-2012 05:09 PM

The PMP Industries kit tends to hover at or below $30. That's what I'm using currently on my sniper.

Or you could spend $50 on one of TJD's carbon fiber kits.


All times are GMT -4. The time now is 04:45 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC