mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Pump Markers (http://www.mcarterbrown.com/forums/pump-markers/)
-   -   Pump cocker? (http://www.mcarterbrown.com/forums/pump-markers/215144-pump-cocker.html)

paintman161 10-03-2012 06:36 PM

Pump cocker?
 
So I just got this cocker from eBay and was wondering if there is a stock feed tube or something I can put on it? I thought I seen something that fits right in the feed neck, or attaches to the threaded part for the feed neck.

p-bpat 10-03-2012 06:42 PM

Sanchez machine makes stock class feed tubes that go right into the feedneck.
Sorry I don't have pics or links.
Pat.

toymachine 10-03-2012 08:22 PM

Sanchez machine -->http://www.paintballgateway.com/smloaders.html

There a couple diff types of feed tubes like that, where you have a stick feed with a 90* adapter that fits into a normal vert feedtube (such as found on your blackmagic up there)

if I were you, I'd go to the hardware store and make me a homemade stock class feed with pvc.

what kind of threads (if any) are there on your feedtube? you could always have them trimmed down and add a clamping stye stock class feed (like pps makes). or tapped for ccm threads.

not to many stock class options for wgp threads (any?)

paintman161 10-03-2012 08:39 PM

Quote:

Originally Posted by toymachine (Post 2493673)
Sanchez machine -->Sanchez Machine Loaders & Hoppers

There a couple diff types of feed tubes like that, where you have a stick feed with a 90* adapter that fits into a normal vert feedtube (such as found on your blackmagic up there)

if I were you, I'd go to the hardware store and make me a homemade stock class feed with pvc.

what kind of threads (if any) are there on your feedtube? you could always have them trimmed down and add a clamping stye stock class feed (like pps makes). or tapped for ccm threads.

not to many stock class options for wgp threads (any?)

Thanks, did not realize they were 40.00, I'm not sure the thread size but sure it's standard wgp threads, whatever that may be...

May just make one out of copper or PVC.

toymachine 10-04-2012 12:36 AM

Yea, homemade varieties often are the best. I had the chance to play around with the SM ones in the link. Not a big fan - they're big and bulky for my taste, so in that sense a pvc one wouldn't be any different. Plus, I found they're pretty big in terms of the feedneck o-rings (although an adjustable feed as on your black magic would nullify that problem). Chances are you can find the SM ones cheaper, but not by too much.

A copper stock class feed with a little bit of elbow grease and polish would be sick!

joedirt199 10-04-2012 10:27 AM

http://www.mcarterbrown.com/forums/d...lass-guns.html

easier to make your own and cheaper. here is the do it yourself thread with different versions. you can make 45*, horizontal, straight up, or just a cram and jam.

Murf425 10-04-2012 10:29 AM

Walz makes some VERY nice polished brass (or powdercoated black) 45 degree stick feeds that will fit right into that clamping feedneck.

paintman161 10-04-2012 10:36 AM

Quote:

Originally Posted by joedirt199 (Post 2494224)
http://www.mcarterbrown.com/forums/d...lass-guns.html

easier to make your own and cheaper. here is the do it yourself thread with different versions. you can make 45*, horizontal, straight up, or just a cram and jam.

yea saw that just went and got some tube and fittings to make one.


All times are GMT -4. The time now is 02:59 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC