mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Pump Markers (http://www.mcarterbrown.com/forums/pump-markers/)
-   -   Stock class tube on semi? (http://www.mcarterbrown.com/forums/pump-markers/219766-stock-class-tube-semi.html)

rick_516 11-28-2012 12:06 PM

Stock class tube on semi?
 
Is there any semi automatic gun out there that can be fitted with a stock class tube adapter (like from a phantom or with a cram n jam)? Without any drilling or tapping.

Stilgar 11-28-2012 12:54 PM

https://fbcdn-sphotos-h-a.akamaihd.n...17569244_n.jpg

toymachine 11-28-2012 06:04 PM

Quote:

Originally Posted by rick_516 (Post 2546649)
Is there any semi automatic gun out there that can be fitted with a stock class tube adapter (like from a phantom or with a cram n jam)? Without any drilling or tapping.

I use a PPS stock class tube on a mag once in a while, so problems whatsoever. I use the gun's powertube warpfeed/powerfeed bodies to angle the tube slightly upwards so the PPS 90* sc feed turns into a 25-45* gravity fed tube.

brew52 11-29-2012 02:00 PM

1 Attachment(s)
I use this on my aoutomags. Takes just a few min to swap bodies.

toymachine 11-29-2012 06:57 PM

^VERY NICE! Got, what a dream to shoot a vsc pump mag!!! :drool::drool::drool:

brew52 11-29-2012 10:09 PM

Quote:

Originally Posted by toymachine (Post 2548168)
^VERY NICE! Got, what a dream to shoot a vsc pump mag!!! :drool::drool::drool:

You can find out! Lol. I never use it!

toymachine 11-29-2012 10:51 PM

LOL, thanks brew, I'll keep that in mind if I can ever find a nice pump mag setup. I have come across a handful of guys who make that sort of feed, either stock class or spring, so there are a lot of options out there for mags especially.

heinous 11-29-2012 10:54 PM

i played with dundadun while he got a stick feed on his invert mini.

and a kilt...

sQuidvision 11-29-2012 11:01 PM

you can always pull the spring out of the empire stick feed:
http://i1046.photobucket.com/albums/...4881CA8D18.jpg

Or drop one of these on a cocker:
http://www.ebay.com/itm/CCM-S5-S6-J2...item416dd3575d

Another option for mags:
http://i1046.photobucket.com/albums/...318FAC4473.jpg
Phantom feedgate JB welded to the body... i was just craming 10rnd tubes in.

Or if you like removable mods:
http://i1046.photobucket.com/albums/...00281C9125.jpg

sorry for the flood of pics... ive been on a bender of sorts putting 10rnd tube feeds on markers that dont usually take them :p

Skibbo 11-29-2012 11:02 PM

3/4 PVC elbows fit over the Ego feedneck nub. Can throw a bit of copper pipe on the end w/a phantom feedgate and you're good to go.


All times are GMT -4. The time now is 09:40 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC