| ||Thread Tools||Search this Thread|
|11-29-2012, 12:56 PM||#1 (permalink)|
Six Point Five
Join Date: Sep 2011
Location: joliet illinois
springing a pmi trracer
Hey guys.. ive done springs for cockers but never a nelson style or a pmi. Im wondering what springs to change. Ive tryed to search and haven't found much.
Fox Paintball. Millington, Il.
|11-29-2012, 08:01 PM||#3 (permalink)|
Join Date: Dec 2010
Location: Fascist Valley
Nelson Hammer/Mainspring = Cocker Hammer/Mainspring
Nelson Valve Spring* = Cocker Valve Spring (with a couple coils cut off to fit a nelson's valve body)
You can also buy a set of three different strength nelson mainsprings from CCI. IMO the best thing you can do in this situation is use it as an opertunity to get yourself Maddman (New LP) Cocker Spring Kit (it's at the bottom of the page)
*You can use stock cocker valve springs, without any modification whatsoever, if you have a RTR valve body and the appropriate valve guide.
I need YOU to build me a custom Sheridan body! or Sell Me Your PMI-I, P68-SC or P-12 Complete Gun or Just the Body!
"Have You Seen Molly?"
Fall in Love With Your [Working] Thumper All Over Again!
WTB Sheridan Parts/Upgrades (Sight Rail & Cooper-T bolts/CA adapters/ASAs)
|Thread Tools||Search this Thread|