-   Pump Markers (
-   -   Siler Frames to Order!!! (

toymachine 01-07-2013 11:26 PM

Siler Frames to Order!!!
Order Back CLOSED
If you didn't make the cut and still want a frame, let me know and I'll put you in the Overflow list.
If someone on the Will Call list decides to cancel their order, people on the Overflow list will be bumped up onto the Will Call list, in the order they were originally added to the Overflow list.


I'm about to purchase one of Siler single trigger sliding "Luger" styled autococker trigger frame. These frames are currently being polished and anodized, and will be ready in about a weeks time. They will only come in polished black. They are designed to work on Autocockers and Snipers, although I'll likely modify mine so that I can use it on a sheridan based marker. Each frame will come complete with all necessary parts, including grip panels. They come with the wedge pictured on the autococker below, so that you can mount standard bottom line ASA setups. They will cost $95 + $5 for USPS shipping. This includes the price for polishing and anodizing. They will be shipped from California, USA. Each frame will be sold as a complete sliding autococker/sniper trigger frame unit. Each of the 20 Siler trigger frames will come with all necessary parts, screws, grip panels, etc. etc.

Given scarcity of this product, only one frame per person, sorry.

Will Call:
(as of 1/11/13, 19:59PST)
#1 - toymachine
#2 - docfire
#3 - redlaser666 RW
#4 - noclue119
#5 - foidpoosening
#6 - Spazdoc
#7 - Frgood BA
#8 - rschoi_75
#9 - briguyz71
#10 - saintnoir
#11 - HokiePB
#12 - Azreal
#13 -
#14 -
#15 - Jebus RW
#16 - Riddler RW
#17 - Magoo BA
#18 - pk5 RW
#19 - Sean_Chip
#20 - The Flounder BA
#21 - docfire
#22 - Pdubs
#23 - _
#24 - _
#25 - _

Names on the "Overflow" list asked to get on the original list but didn't make it in time for the first 20 or are people who wanted more than one frame for their order. There will be no other frames past the 20th. This is it, no others exist. No more frames will ever come to light.

If you are on the Overflow list, you will be bumped onto the original list in order of name received, if someone on the Will Call list decides to cancel their order. To those on the Overflow list: Sorry guys, keep you fingers cross (and start planning the murder of Will Call list member ;)).

Apparently these are pretty much the best of the best when it comes to an adjustable sliding single trigger autococker frames. Lots of adjustment. Ball bearing smooth. I mean, literal perfection. The finish is an extremely high quality and fine polish. The black anodizing is likewise extremely high quality.

I'll post up some pics and more specific details once I've gathered everything together, but for now just wanted to get this out there asap. Shoot me an pm if you have any questions or want to get your name added to the list. I will set you up directly with the seller and will not benefit personally in any way from your purchase or whatever. Just outta the kindness of ye ole heart, nothing more nothing less <3

Anyways, frames will be ready for ordering and shipment the week of January 14th, 2013. Please let me know if you're interested in ordering any of these, so I can get you set up. There are only a few left (exactly 20!), and I doubt any will ever be made, ever again. Ever. I will keep the order list updated as much as possible. First come, first serve. By letting me know you're interested and getting your name on the list, you are then under no obligation to buy and can back out at any time, without reason (just let me know!).

On a personal note: If you know a good shop local to Los Angeles or San Diego in California where I can get my frames anodized, please let me know (same for anyone local who can mill the top of the trigger frame to fit the lower tube of my PG, which is apparently as super simple process assuming one has the right equipment). Also, if you're in LA or SoCal, you might be able to save on shipping my picking them up in person, although this option has yet to be confirmed.


On an Autococker:

Custom "Pistol Worthy for a General" PGP Project:

I wish they were, but for the record none of these are my markers :( :rolleyes:

EDIT: I do not yet know for sure if there are 15 (or about so) COMPLETE trigger frames or 15 trigger frames, some complete some not. The first come first serve policy applies to complete frames. If you end up only able to get the frame, without the set screws and whatnot, you will have to probably get your own made. Same goes for the grip panels - I've never seen anything like them before so you'd have to make yourself something custom, a one-off set or something to fit this frame.

senghing27 01-07-2013 11:40 PM

Will they be coming with the wedge? I know my team mate has been waiting for the wedge for his frame for some time now.

HokiePB 01-07-2013 11:42 PM


Originally Posted by senghing27 (Post 2585539)
Will they be coming with the wedge? I know my team mate has been waiting for the wedge for his frame for some time now.

Great question. If they are I'd be up for one.

toymachine 01-07-2013 11:47 PM

I will check! I take it you're referring to the adapter in the first picture, with the Siler frame on that custom Autococker? I'll let everyone know and update my op once I hear back, likely sometime tomorrow.

And sorry how this is so short notice, but better late than never, right? Cause never is coming up pretty soon, unfortunately :(

idkfa 01-08-2013 12:33 AM

Who is making these?

HokiePB 01-08-2013 12:36 AM


Originally Posted by idkfa (Post 2585617)
Who is making these?

I'll let Toymachine confirm, but I think these are some of George Silers old stock (maybe the last of it from the way it sounds).

toymachine 01-08-2013 12:59 AM


Originally Posted by HokiePB (Post 2585621)
I'll let Toymachine confirm, but I think these are some of George Silers old stock (maybe the last of it from the way it sounds).


docfire 01-08-2013 01:42 AM

Im in on two of these.

redlaser666 01-08-2013 01:49 AM

I may be interested in one as well.

noclue119 01-08-2013 02:23 AM

I'll take 1

All times are GMT -4. The time now is 07:41 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC