Paintball

[WIvijhn]

Any one certain if you do or don't need the capacitor? I ordered my tboard etc but no cap.

[DocRock]

You'll be the first...let us know. I know hvac and myself both bought capacitors...just in case.

[pump]

bummed the radio shack cap 2200 and bigger are the size of the frame

[DocRock]

Hvac got it all to fit in an 86* CCM frame man...you should be able to make it work. I have faith.

[pump]

the cap too?
oh BTW DRG got his up and running with a single trig LCD frame...but without cap the Tboard is running at 6ms while his eblade board was doing 4.5ms

i wonder what will happen is i put in a 6800

[hvacman250]

I dont think you need it, it just gives the battery a kick in the ***. Should lower dwell and promote longer battery life.

[pump]

well thats the lowest he could go i think

[drg]

I have it running without the cap, as does jt5xx the other guy ...
But I plan to put one in there to see if it helps any.

[mxmtl]

Well, for reference, here is the only way I was able to get just a 9V battery in an unmodded CCM 45 frame:





The stock CCM grips are a bit thicker than how far the battery sticks out. So I think it can work, but the battery connecter might be a PIA.

Ideally, I think I would like the microswitch to sit right below the sear without having to remove any metal. Otherwise I would have to devise something that would extend down the spring tube and mount the switch on the spring base.

[hawaiianking]

As far as boards and caps, the mini morrlock does require a cap to run the mq. the universal t-board needs a cap i suggest a minimum 2200 uF for a 4ms dwell. i tried some smaller caps but when fired you wont get that solid pop. both the morrlock and t-board need some soldering. i have had success with a stock ion board but the dwell settings are high.