Paintball

[~Rascal'[POLAND]]

Hi!

This is the source of my current problems :F


Its old 99' pump-cocker both form one of the users of Mcarterbrown forum :F

Firstival i have to tell that I'm a n00b if we are talking about cockers so don't kill me if my problem is silly :F

When I've got the marker it worked fine (it has just set low velocity) but after my activities like putting everything to parts --> cleaning --> using lubricate and finally putting all together there is a problem When I'm screwing in the co2 bottle its everything ok. No leaks. Everything looks to be fine. But after recocking it (with hopper full of paint) and pulling the trigger there is a characteristic "boom" what every marker does when it's firing but the paintball doesn't "explode" out of the barrel but just sadly drop out for about few inches

So getting everything togheter in simple form:
There is a "boom" but the gas doesn't push the ball through the barrel adding wanted speed. I;ve checked the bolt it's put correct ...

I HAVE ABSOLUTELY NO IDEA what is the reason of this situation.

PLS Experienced Cocker users help me

[aaronlecain]

did you take the valve out? is that installed correctly? the bolt would have been my first check. but you said you put it in correct. did you change your reg pressure? IVG (brass nut in the back) position? we need more info

[brycelarson]

also, that's a pre-2k body, it might want high pressure, while the reg is from a prostock I think.

Try taking off the reg and screwing the tank right in ASA and see what happens.

If it doesn't do anything when you cock and trigger it - then it needs the reg.

In that case you may have the IVG backed out too far, the reg set to high or the reg set too low.

[~Rascal'[POLAND]]

I've solved the problem.
It all was matter of screwing in the reg and regulate IVG

Yes I know N00b I'am
Cocker shots just great! accurate as hell