|
             |
 |
|
 |
| | LinkBack | Thread Tools | Search this Thread |
05-08-2008, 04:43 PM
| #1 (permalink) |
| Loose Cannon  Join Date: Mar 2007 Location: St. John's, NL, Canada
Posts: 1,334
| Stock Feed for 1" Neck I am wondering if anyone makes a feed tube for 1" necks? I have a Line SI Bushmaster that I want to use as a stock class gun, but so far all I have seen are 7/8". Any ideas? I would love a PPS stock tube, but again, they are 7/8". |
|  |
|
05-08-2008, 11:35 PM
| #2 (permalink) |
| Blah  Join Date: Feb 2007 Location: So Cal
Posts: 1,290
 | Noxx can make one for you.
__________________ Winchesters 50rnd Hoppers $4 3.5 tanks w/ valve $23 Dealer for: CCM, CCI, CP, and other misc companies. Purchase here:Snap Paintball I am not the owner of snappb. |
| |
|
06-03-2008, 01:23 PM
| #3 (permalink) |
| MCB Member Join Date: Jul 2007 Location: San Diego CA
Posts: 434
| i've made one using a phantom 15rd stock feed and and adjustable elbow... i essentially "flipped" the elbow- the end that normally would go around the loader clamps onto the feed neck, and the other end clamps onto the phantom stock feed. some electrical tape was needed, but overall a cheap mod. |
|
| |
|
06-03-2008, 02:27 PM
| #6 (permalink) | |
| Paintball Customs  Join Date: Apr 2006 Location: Meridian, Idaho
Posts: 1,679
| Frink is correct. It works with my spring feeds and SC feeds.
__________________ Quote:
| |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
