Halfblocked, MQ'd, CCM frames pump finally done

hvacman250 · 05-13-2008, 11:49 PM

Over look the dirt and paint on the gun. We had NPPL pump practice a few days ago and I havent had a chance to give her a bath.

Gun ready to shoot (no hopper or tank) weighs in at 2 lbs. 0.5 oz...with the battery and barrel.

Was a fun build, defiantely a sweet shooter.

pump · 05-14-2008, 03:08 AM

wuts ur dwell, and ur psi

hvacman250 · 05-14-2008, 07:42 AM

Its running a 2200uf capacitor, dwell at 4 ms.

Pressure I dont know. Ive been told the MQ vents at 300 psi, and Im about a full turn or more in on the CP reg from venting. If I had to guess, 250 ish.

Heebs · 05-14-2008, 07:45 AM

Very Very NICE!

I hope mine turns out as well!

pump · 05-14-2008, 02:16 PM

i might try and cannibalize one from a broken Ion at the shop here, but i really want 3300 or 6800 hahahaha

stircrazzzy · 05-14-2008, 05:30 PM

I'd love to see a video of this shooting. I have always been intrigued by mq-valved pumps

pump · 05-14-2008, 08:24 PM

here go
YouTube - mQ Jackal sniper

stircrazzzy · 05-14-2008, 08:51 PM

Yep, seen it before, it's completely awesome. I think that I kinda want one. Grrrr, I have too many things to buy!

drg · 05-17-2008, 04:02 AM

Nice work! Welcome to the club

05-13-2008, 11:49 PM	#1 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 609	Halfblocked, MQ'd, CCM frames pump finally done Over look the dirt and paint on the gun. We had NPPL pump practice a few days ago and I havent had a chance to give her a bath. Gun ready to shoot (no hopper or tank) weighs in at 2 lbs. 0.5 oz...with the battery and barrel. Was a fun build, defiantely a sweet shooter. __________________ PbPumpShop - for all your pump needs! Feedback Last edited by hvacman250; 05-19-2008 at 09:34 PM.

05-14-2008, 03:08 AM	#2 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 590	wuts ur dwell, and ur psi __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

05-14-2008, 07:42 AM	#3 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 609	Its running a 2200uf capacitor, dwell at 4 ms. Pressure I dont know. Ive been told the MQ vents at 300 psi, and Im about a full turn or more in on the CP reg from venting. If I had to guess, 250 ish. __________________ PbPumpShop - for all your pump needs! Feedback

05-14-2008, 07:45 AM	#4 (permalink)
Heebs MCB Member Join Date: Feb 2007 Posts: 1,627	Very Very NICE! I hope mine turns out as well! __________________ Heebs Feedback

05-14-2008, 02:16 PM	#5 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 590	i might try and cannibalize one from a broken Ion at the shop here, but i really want 3300 or 6800 hahahaha __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

05-14-2008, 05:30 PM	#6 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 169	I'd love to see a video of this shooting. I have always been intrigued by mq-valved pumps

05-14-2008, 08:24 PM	#7 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 590	here go YouTube - mQ Jackal sniper __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

05-14-2008, 08:51 PM	#8 (permalink)
stircrazzzy MCB Member Join Date: Nov 2007 Posts: 169	Yep, seen it before, it's completely awesome. I think that I kinda want one. Grrrr, I have too many things to buy!

05-17-2008, 04:02 AM	#9 (permalink)
drg Seasoned Member Join Date: Mar 2007 Posts: 805	Nice work! Welcome to the club __________________ My feedback: PBN Old-New / AO / CC / MCB Halfcocker.com - The site for all things halfblock/midblock cocker is BACK HawaiiPB.com - Paintball forums for the state of Hawaii

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search