Paintball

[one.man.band]

It's an Eclipse Cocker with a zero B board. (eblade)

I just wanna make sure all I need to do is take the pnues off and put a pump kit on it... I don't need to fiddle with the board or anything?

I'm not sure about the workings of an Eblade, if it were mech i'd be fine

Thanks in advance for any help you can give me

[Marauder_Pilot]

Pretty much, yeah. Triggering it still releases the sear, so there shouldn't be any problems.

[one.man.band]

Originally Posted by Marauder_Pilot

Pretty much, yeah. Triggering it still releases the sear, so there shouldn't be any problems.

Thanks, I thought it would, just easier to make sure

[drg]

You will probably want to lower the CTO, so you don't have to shut off the eyes to use it.

[hvacman250]

Can't convert an upside down cocker into a pump. It just wont work.

[Marauder_Pilot]

Don't confuse him.

[one.man.band]

Originally Posted by drg

You will probably want to lower the CTO, so you don't have to shut off the eyes to use it.

Okies, i'm gonna fiddle with the board a lot anyway.

Originally Posted by hvacman250

Can't convert an upside down cocker into a pump. It just wont work.

haha, it's the only pic i had

[Marauder_Pilot]

If you remove the eyes completely, it shouldn't be an issue, and should help your battery life anyways. It's not like a pump really needs eyes anyways...

[Chemical-X]

Going from E-semi to E-pump then back again is incredibly easy, in short there is no timing to fiddle with.

As nice as having an electric trigger is you may eventually want to switch to a slider. There is something about the way a good slider feels that has no equal.

[drg]

Originally Posted by Marauder_Pilot

If you remove the eyes completely, it shouldn't be an issue, and should help your battery life anyways. It's not like a pump really needs eyes anyways...

Actually yeah, set breech sensor to NONE.