| ||Thread Tools||Search this Thread|
|08-20-2008, 02:14 PM||#11 (permalink)|
Join Date: Apr 2006
Location: Vancouver, BC
Guys, I've dealt with the exact same problem on the exact same gun. It's a superbolt problem. He's right, the sear sits too high and catches on multiple points. Honestly, the best solution may in fact be to file or grind the sear down. That was the only solution I could find.
|08-20-2008, 07:28 PM||#12 (permalink)|
After ignoring several posts on the first page and thinking long and hard I
finally realized there is a built in adjustment screw!
I found the adjustment screw deep inside a hole right here:
Screw it in and the forward travel is limited, thus lowering the height of the sear, and it works great now!
I also re-lubed the 3-way (after LOTS of leaking) and re-timed the gun and now:
Works like a charm. Now I just need to order the WWA mini kit.
EDIT: Pictures with natural light:
Last edited by xluben; 08-20-2008 at 07:58 PM.
|09-26-2008, 08:52 PM||#17 (permalink)|
Join Date: Oct 2006
You found the way to fix it. Good! I was just about to type about the limit screws.
When you remove the upper feedneck collar you're left with the base of the feedneck in the body. The threads are cocker/shocker sized and any cocker feedneck will fit.
Helluva deal for $40.....
I had a "Paintball God" moment once.
Like Al Bundy's Polk High football moment I live on
for the slim chance of repeating that one time
miracle in some small way.........
|09-26-2008, 09:07 PM||#18 (permalink)|
Yep, thanks guys. Not sure if you all saw, but it is indeed a pump now
jcurt455 Pump Kit and Half Block Review
And the frame issue is no longer relevant due to the CCM frame
|Thread Tools||Search this Thread|