| ||Thread Tools||Search this Thread|
|08-27-2008, 11:38 PM||#1 (permalink)|
Join Date: Feb 2008
Location: BC, Canada
CP regs on a Sniper 2
So I'm using a RF HB Sniper 2 with a CP regulator and stock internals. I was wondering what psi should I run on the CP reg? TO get the most effciency
If it helps any this is what my setup is:
13/30 Hpa tank with a Myth reg.
|08-29-2008, 10:23 PM||#2 (permalink)|
Join Date: May 2007
all you can really do is get yourself to a local paintball park, and have a lot of paint/all day air, with your fav allen that fits in the cp and slowly tune... (sweetspot your reg = best setup w/ efficiency for YOUR gun, since all snipers run at a slightly different pressure)
Hope this helps
|08-29-2008, 10:45 PM||#3 (permalink)|
Join Date: Apr 2007
you're going to be somewhere from just below 300 up to 450.
sweetspotting is what you're going to need to do. As long as the reg is externally adjustable it shouldn't take you more than 10 minutes or so to do it.
|Thread Tools||Search this Thread|