mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Pump Markers (http://www.mcarterbrown.com/forums/pump-markers/)
-   -   airsoldier parts w/ hammer? (http://www.mcarterbrown.com/forums/pump-markers/52722-airsoldier-parts-w-hammer.html)

chongballa 10-01-2008 09:41 PM

airsoldier parts w/ hammer?
 
would the lightened hammer and the powertubes from airsoldier (TASO/Lapco parts) work/ fit in my kingman hammer? i think so, but i want to be sure before i order

casper 10-04-2008 10:27 AM

I had a lightened hammer from taso for my taso s.c. it made the pump stroke very stiff.

LoopyDood 10-04-2008 04:20 PM

Quote:

Originally Posted by casper (Post 541076)
I had a lightened hammer from taso for my taso s.c. it made the pump stroke very stiff.

Did you remember to clean off the rust?

711 10-04-2008 07:07 PM

Will these work on any nelson design?

chongballa 10-04-2008 07:48 PM

thats what i was thinking, but i wanted to make sure first. i want to put some new life into my old hammer

casper 10-05-2008 05:36 PM

yes I cleaned off the rust !!!hahahah

Rainman229 10-05-2008 05:41 PM

( Lighter hammer = heavier hammer spring )= stiffer pump stroke

chongballa 10-05-2008 08:50 PM

so, will they fit? (hammer and powertubes) or, would it be better to polish up the stock brass internals? im curious because im making my hammer into a stock class pump and would like the best setup for 12g performance

Cunha 10-07-2008 05:28 AM

It is not exactly that way rainman. Ever seen a lapco, or any nelson setup with a fluted hammer? Light spring, or light medium.

just needs to be tuned.

chongballa 10-09-2008 09:45 PM

so would the parts fit my hammer, or not?


All times are GMT -4. The time now is 09:27 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC