Custom

[roughdraftx01]

Hey rainman. Ive been looking at your work on the centerfeed to stock class conversions and I'm impressed with you work.. awesome stuff. I was wondering how much the typical job is. I have a new WGP Outkast Autococker SniperII



I Dont want anything special.. just a permanent stock class feed that is all polished black/black and sits right on top of the body (as much of the feed that can be on top of the marker body). Style feed "side holes/slots" to your liking if you like. I'm not a critical person /w that sorta stuff.

I am very interested in getting the job done as soon as your service is available. I can send you the marker and payment next day I receive word that you can accept it. Just let me know where should I send the marker to and what payments you accept. I can Paypal if that is best.

If it is of no trouble as well. Is it possible for you to install a clean "hitman mod" onto a CCM pump Kit that I can include when sending the marker? Nothing unique, just the typical double bar going down (about 2 in. long - including the bent end) with the end bent at a 45'ish degree angle; black polish handle. I would do it myself but I really want it cleanly done with a drill press.

Thank you very much in advance and hope to hear from you soon. Hope I am not asking too much!

[Rainman229]

Have a few ideas on the feed that could be done. Not to sure on cost.

As for the hitman mode i can install it.

[Rainman229]

It's here

[roughdraftx01]

awesome! what do you think will be the estimated time frame for it to be finished?

[Rainman229]

Originally Posted by roughdraftx01

awesome! what do you think will be the estimated time frame for it to be finished?

About a few more hours.

I can't seem to find the info on doing the hitman mod. Someone decided to be a dick and took it off a few sites it was posted on. Anyways it may be some time till i can do this. But what i'm planing on doing is making a new guide plate for the ccm pump that has it built in all one peice. I'm taking measure ments from yours to do this. But getting it set up to cnc one may be some time since i would need to draw it all up and eveything. So I guess we'll skip this for now. I will let you know when i make them.

As for your feed. A few poeple got a sneak peek of it last night. I'm just about ready to anodize it. Your setup will be convertable. Back and forth from hopper to stockclass. It has an angel threaded feed now.

Rainman


Oh forgot. As for the Tat thing i would suggest sending off to have that lazer engraved instead. Doing it the way i was going to would be to dificult with all the milled edges on the body.

[roughdraftx01]

Originally Posted by Rainman229

About a few more hours.

I can't seem to find the info on doing the hitman mod. Someone decided to be a dick and took it off a few sites it was posted on. Anyways it may be some time till i can do this. But what i'm planing on doing is making a new guide plate for the ccm pump that has it built in all one peice. I'm taking measure ments from yours to do this. But getting it set up to cnc one may be some time since i would need to draw it all up and eveything. So I guess we'll skip this for now. I will let you know when i make them.

As for your feed. A few poeple got a sneak peek of it last night. I'm just about ready to anodize it. Your setup will be convertable. Back and forth from hopper to stockclass. It has an angel threaded feed now.

Rainman


Oh forgot. As for the Tat thing i would suggest sending off to have that lazer engraved instead. Doing it the way i was going to would be to dificult with all the milled edges on the body.

Thats sounds really great. I guess I need to go out and find a nice new feedneck As for the hitman mod.. appreciate the effort and I will be sure to keep up to date when you finally get that project going. For the laser engraving suggestion, do you happen to know anyone that may be a good person/company to refer?

Thanks

Very quick work I might add! I will add some positive feedback asap.

[Rainman229]

Not to sure who do's the lazer engraving. Ask in the expert forum or custom forum. I know there are a few here that have had it done.









enjoy.
I'm actauly going to head in for the night. I'll still be on. And i'm going to try and do the hittman mod drawing and g-code for the cnc.

[roughdraftx01]

hah, I love it! But im wondering since im still new to stock class feeds. What keeps the balls from falling out on this kind of feed? Ive only seen how the plastic ended ones work.
also.. since the marker is already there. If i remembered correctly, you only anno'd bodys now, nothing else? Would it be possible for you to anno the body to gloss black to match more with the stock class feed? Well.. I can't really tell since you can see it in person and I only have pictures. I'll trust your opinion. If you think it looks just fine then just scratch his whole idea

[Rainman229]

Originally Posted by roughdraftx01

hah, I love it! But im wondering since im still new to stock class feeds. What keeps the balls from falling out on this kind of feed? Ive only seen how the plastic ended ones work.
also.. since the marker is already there. If i remembered correctly, you only anno'd bodys now, nothing else? Would it be possible for you to anno the body to gloss black to match more with the stock class feed? Well.. I can't really tell since you can see it in person and I only have pictures. I'll trust your opinion. If you think it looks just fine then just scratch his whole idea

It has a phantom feed ring/gate in it. To hold the balls in.
I would say leave the ano as it is since the body is in great shape. Wait it out and see. You can always do it later if it bores you. but the 2 colors go good together.

[BigOldSkool]

Fyi for laser work... ODD for custom.. or Hybrid if you dont mind one of there three patterns.. contract killer , hyabucci or bandanna print.. I just sent my Ripper 2.5 over to them for the bandanna print they said like 2 weeks and it will be done..