Ano on about 80 pieces Can you do it?

matteusz · 08-28-2007, 11:15 AM

Oh great rainman I read your update and see that ano is "not happening" I am not quite sure what that means or if it is long term.

I have some 34-35 logic trigger frames with triggers that I need ano'd. They are raw as machined and would need surface finishing and anodizing. About 8-9 in dust black if that is possible and the rest in gloss black. Each frame has a trigger that needs to be ano'd to match. If the 8 or so is too small of a run for dust they could all be in gloss (it just might be a few less frames).

I also have 4-6 lonestar grip blocks that need anodizing in gloss black. No surface finishing needed on these they are finished by benchmark and ready to be ano'd.

I would like to send all of this to you and get it done in by the end of September at the latest.

If you would please give me a quote and an idea of what turn around would be I would be grateful. Also what about payment terms? Could I put some down with the order and pay the balance on receipt of the goods? I prefer to do it this way since this is a larger order and I would like to see the work before I pay in full (despite your good reputation). Get back to me if you would please. Here are some pics of what one of the frames looks like assembled.

Rainman229 · 09-02-2007, 06:30 AM

Sorry out of my league. You may be better off finding some one local to do this. I bigger shop will have the means to polish them cheaper then i could. I have to do them mostly by hand and only can do a few at a time in the tumbler. My tumbler is a toy compared to what a big shop would have.

matteusz · 09-02-2007, 01:10 PM

Quote:

Originally Posted by Rainman229

Sorry out of my league. You may be better off finding some one local to do this. I bigger shop will have the means to polish them cheaper then i could. I have to do them mostly by hand and only can do a few at a time in the tumbler. My tumbler is a toy compared to what a big shop would have.

Thanks for the tip. I will see what I can find.

Cunha · 09-02-2007, 01:18 PM

I would see if there is a good local shop to you. Look for a local machine shop and ask if he knows of a good anodizer nearby.

matteusz · 09-02-2007, 01:24 PM

Quote:

Originally Posted by Cunha

I would see if there is a good local shop to you. Look for a local machine shop and ask if he knows of a good anodizer nearby.

Yeah I plan on getting the phone book out on Tuesday and making some calls. I know there is one shop a friend of mine used to work at but it is a crazy place and the owner can be unreasonable so I plan to avoid it. It looks like there are several larger shops in the Salt Lake area but I need to see what they can do.

08-28-2007, 11:15 AM	#1 (permalink)
matteusz Seasoned Member Join Date: Oct 2006	Ano on about 80 pieces Can you do it? Oh great rainman I read your update and see that ano is "not happening" I am not quite sure what that means or if it is long term. I have some 34-35 logic trigger frames with triggers that I need ano'd. They are raw as machined and would need surface finishing and anodizing. About 8-9 in dust black if that is possible and the rest in gloss black. Each frame has a trigger that needs to be ano'd to match. If the 8 or so is too small of a run for dust they could all be in gloss (it just might be a few less frames). I also have 4-6 lonestar grip blocks that need anodizing in gloss black. No surface finishing needed on these they are finished by benchmark and ready to be ano'd. I would like to send all of this to you and get it done in by the end of September at the latest. If you would please give me a quote and an idea of what turn around would be I would be grateful. Also what about payment terms? Could I put some down with the order and pay the balance on receipt of the goods? I prefer to do it this way since this is a larger order and I would like to see the work before I pay in full (despite your good reputation). Get back to me if you would please. Here are some pics of what one of the frames looks like assembled. __________________ MCB Feedback Here: http://www.mcarterbrown.com/forums/s...3459#post83459 AO Feedback Here: http://www.automags.org/forums/showthread.php?t=202414 Old School Skill, New World Tech

09-02-2007, 06:30 AM	#2 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	Sorry out of my league. You may be better off finding some one local to do this. I bigger shop will have the means to polish them cheaper then i could. I have to do them mostly by hand and only can do a few at a time in the tumbler. My tumbler is a toy compared to what a big shop would have. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-02-2007, 01:18 PM	#4 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA	I would see if there is a good local shop to you. Look for a local machine shop and ask if he knows of a good anodizer nearby.